Following, http://fedoraproject.org/wiki/Architectures/ARM/F21/Installation I tested Fedora-SoaS-armhfp-rawhide-20150129-sda.raw.xz Booting with display direct to HDMI proceeds ok, except I notice that the connected optical mouse does not illuminate. If it is first boot, an initial setup screen appears, (which displays fine, 4:3) neither keyboard or mouse will produce a reaction. (This is a standard wired keyboard and optical mouse occupying the 2xUSB ports.) If it is a boot subsequent to running first boot over serial cable, login screen displays fine 4:3, but cannot login, due to no keyboard or mouse working. Another USB device with a LED indicates that the USB ports seem to be unpowered, except for a short pulse at about the point where the boot trace gives way to a black screen, say 5 seconds from power on. By comparison, by the same LED test, Fedora20 Remix powers the USB ports at about 3 seconds from power on, and same keyboard and mouse work fine. Booting with serial cable is successful to login and performing simple commands. Tested Fedora-Xfce-armhfp-rawhide-20150129-sda.raw.xz and got basically same results. _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
