On 10/22/2014 05:49 PM, Paul Whalen wrote:
----- Original Message -----
I downloaded:
https://dl.fedoraproject.org/pub/alt/stage/21_Beta_TC4/Images/armhfp/Fedora-Minimal-armhfp-21_Beta-TC4-sda.raw.xz
And the checksum (sha256sum) agrees. I build the SD card with:
/home/rgm/arm/fedora-arm-image-installer/fedora-arm-image-installer.sh
--image=/home/rgm/arm/Fedora-Minimal-armhfp-21_Beta-TC4-sda.raw.xz
--target=Cubietruck --media=/dev/sdb --norootpass
I put the SD card in my Cubietruck and here is what I get on the serial
console:
Fedora-Minimal-armhfp-21_Beta-TC4 Boot Options.
1: Fedora-Minimal-armhfp-21_Beta-TC4 (3.17.0-301.fc21.armv7hl)
Enter choice: 1: Fedora-Minimal-armhfp-21_Beta-TC4
(3.17.0-301.fc21.armv7hl)
Retrieving file: /initramfs-3.17.0-301.fc21.armv7hl.img
28085684 bytes read in 1456 ms (18.4 MiB/s)
Retrieving file: /vmlinuz-3.17.0-301.fc21.armv7hl
5538024 bytes read in 471 ms (11.2 MiB/s)
append: ro root=UUID=b6a0bdb6-46ac-4206-b116-72e95429cfcd
Retrieving file: /dtb-3.17.0-301.fc21.armv7hl/sun7i-a20-cubietruck.dtb
22431 bytes read in 1239 ms (17.6 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5480e8 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4e537000, end 4ffffdb4 ... OK
Loading Device Tree to 4e52e000, end 4e53679e ... OK
Starting kernel ...
and there it sits.
Add the console to your extlinux.conf. For Cubietruck -'console=ttyS0,115200'.
What is the syntax for adding this? To what line of:
# extlinux.conf generated by appliance-creator
ui menu.c32
menu autoboot Welcome to Fedora-Minimal-armhfp-21_Beta-TC4. Automatic
boot in # second{,s}. Press a key for options.
menu title Fedora-Minimal-armhfp-21_Beta-TC4 Boot Options.
menu hidden
timeout 20
totaltimeout 600
label Fedora-Minimal-armhfp-21_Beta-TC4 (3.17.0-301.fc21.armv7hl)
kernel /vmlinuz-3.17.0-301.fc21.armv7hl
append ro root=UUID=b6a0bdb6-46ac-4206-b116-72e95429cfcd
fdtdir /dtb-3.17.0-301.fc21.armv7hl/
initrd /initramfs-3.17.0-301.fc21.armv7hl.img
I tried putting it as a line after that last, but it did not make a
difference...
In F20 there was some logic to pull in the appropriate console from uboot
if missing in the append line. We needs this back or an alternative.
I did not have to do this pre-alpha, but I suspect this is the new uboot
serial console issue being discussed?
I have a couple days for testing until I start travel, what should I try
to trouble shoot this?
Also I see that there is now a /usr/share/uboot/cubieboard2/ directory,
but it is not one of the script install options. How do I build a
cubieboard2 SD card for testing?
For the 'arm-installer' script you can drop a 'config' file in the 'boards.d'
directory and it should work. Take a look at the others for an example. Let me
know it's working and I can add it.
Paul
thanks
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
