On Thu, Oct 9, 2014 at 5:11 AM, Adam Goode <adam@xxxxxxxxxxxxx> wrote: > Thanks. I got it working via an mSD card, then transferring over. > > The one wrinkle is that I needed to edit a-b-c.d/19-config-adds to add 1:3 > 1:2 1:1 to u_devpart to get the thing booting. Maybe this is a worthwhile > change to make to a-b-c? What Fedora and uboot release? With extlinux.conf support that shouldn't matter I don't believe. Peter > On Tue, Oct 7, 2014 at 6:30 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: >> >> Hi Adam, >> >> > The instructions for Fedora for BBB all suggest to install to an SD >> > card. Is >> > it possible to install to the eMMC and not need an SD card? Any ideas? >> >> There's two possible ways of doing this. >> >> The first is to use a SD card like the standard instructions to get a >> system running not off the eMMC but have a copy of the image on the sd >> card and basically repeat it over onto the MMC, remove the sd card and >> reboot. I've done that with the 2gb model but it's not ideal as you do >> need an initial mSD card. >> >> The second way, which is untested but on my list of to look at (I was >> actually investigating the uboot side of things over the weekend) is >> to use the USB DFU functionality of the usb-otg port. AFAICT all the >> bits are there on the uboot side, and there's dfu-util package but the >> documentation I've managed to find is, at best, poor and I've not had >> time to play and work out all the bits, like how to update the uboot >> too. >> >> Peter > > _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
