Fedora-Minimal-armhfp-21-20140815-sda.raw.xz on a 8Gb SDcard on
Cubieboard2 installed with:
fedora-arm-image-installer.sh
--image=Fedora-Xfce-armhfp-21-20140814-sda.raw.xz --target=Cubietruck
--media=/dev/sdb --norootpass
dd if=/root/u-boot-sunxi/u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024
seek=8; sync
I put the card into the cubie and went into firstboot. Proceed to do a
lot of things without looking at partition size and discovered the /
partition at 1.6Gb when I ran out of disk groupinstalling Xfce Desktop.
So for some reason the autoresize did not work. Is there some message I
should check for from the firstboot?
I used gparted to expand the partition and back to work for now.
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
