Hi, On 07/12/2014 11:42 PM, Craig Lanning wrote: > I have an Olimex a10s-olinuxino-micro-4mb > (https://www.olimex.com/Products/OLinuXino/A10S/A10S-OLinuXino-MICRO-4GB/open-source-hardware ). It has: > > Allwinner A10S CPU > 4MB onboard flash memory > MicroSD slot > SD slot > HDMI video and audio out > headphone out > audio line in > 10/100 Ethernet port > USB2 port > OTG USB port > LCD interface (4.3", 7", 10") > > I downloaded the rawhide image > Fedora-Xfce-armhfp-rawhide-20140712-sda.raw.xz. unxz'd it. > > I then wrote it to a microSD card. > > When it finished, I popped it out and re-inserted it so that it would > mount the partitions. I read the instructions for the CubieTruck on the > ARM Rawhide Installation page > (https://fedoraproject.org/wiki/Architectures/ARM/Rawhide/Installation > ). I looked around in the /usr/share/uboot directory, but didn't find a > directory I thought was more appropriate. Right, currently rawhide pretty much only supports the cubietruck I've adding support for more models on my to-do list. > Are there any instructions for how to build the uboot .bin file? I'd > like to see if I can build one that is more appropriate for my board. There are generic sunxi u-boot build instructions here: http://linux-sunxi.org/U-Boot#Compilation Alternatively you can get the pre-built file for your board from the uboot partition of the allwinner remix here: http://fedoraproject.org/wiki/Architectures/ARM/F20/Remixes > I also noticed in the Known Issues & Usage Tips section that graphical > display is not currently supported. Are there plans to have the > graphical display working by the time Fedora 21 is released? No if you want to have hdmi out working you should use the remix for now. Regards, Hans _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
