Thanks for clarifying the situation. Any guess at the time-frame for the
DT in 3.15?
Regards
Rob
On 31/05/14 18:37, Peter Robinson wrote:
I have successfully installed and booted
Fedora-Xfce-armhfp-20-a10-1-sda.raw.xz from an SD card for a MK802ii using
the select-board.sh script but it uses kernel 3.4.75 and so I don't get the
modules I need for a DVB-T usb device.
If I install Fedora-Xfce-armhfp-20-20140407-sda.raw.xz which uses the
3.11.10 kernel and has the required modules, it does not have the
select-board script. The partitions _/ and _/boot are not recognised and so
the device boots from Nand not the SD card.
Is there a guide I can refer to for this installation?
We don't support Allwinner devices on F-20 because the MMC driver
isn't upstream. The select-board script is part of the AllWinner remix
and that is stuck on the 3.4 kernel. We do support AllWinner on
rawhide/3.15 but we don't currently have a DT for booting the mk802ii
device.
Peter
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
