On Fri, May 9, 2014 at 6:46 AM, Jeffrey Ollie <jeff@xxxxxxxxxx> wrote: > I received a BeagleBone Black (rev B) today and naturally wanted to > get Fedora running on it. The Fedora 20 image booted fine, although > after doing a yum update it wouldn't load the kernel anymore, it just > stuck at "starting kernel...". Anyhow, after reading a few of the > threads on this list I though that I'd give rawhide a try. Here's a > log of my latest attempt (I already had a copy of MLO and u-boot.img > from a previous attempt): To clarify you're using rawhide? It looks from the image name and the subject it's rawhide, but you mention F-20. In terms of the uboot your using you explicitly need the one that comes on the rawhide image so if you had one from an attempt with F-20 that is likely you issue. It may be also that it's using the using the uboot off the eMMC as the uboot you're reporting below is different to the header from ours (see below, yours has -dirty and a diff date). You can use the boot button on the board to tell the BBB to boot using the mSD rather than eMMC for initial boot. U-Boot SPL 2014.04 (Apr 23 2014 - 21:16:10) https://fedoraproject.org/wiki/Architectures/ARM/Rawhide/Installation#For_the_BeagleBone_.28_Black_.26_White_.29 I suspect we need to make a note about the uboot boot button here. Can you confirm if that works for you? Peter _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
