On Wed, 12 Mar 2014 07:59:26 +0000, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: > Hi All, > > Just thought I'd put this out on a dedicated thread for those that are > interested. > > http://nullr0ute.com/2014/03/booting-pandaboard-with-fedora-20-ga/ > > The process for the first boot on the GA images is slightly manual and > documented in the post above, in the next few days we'll get some > updates bits out to fix the issue properly moving forward and have the > fixes into rawhide nightlies RSN. > Hi Peter, Good news: I've tested this process on our Pandaboard A6 boards, and I get a successful boot, resulting in a usable system! (This was with the panda_a4 configuration). Bad news: I've tested it with the Pandaboard ES B3 boards, and the RAM issue is still present. Where can I store the uEnv commands to avoid having to enter them manually each time that I boot the board? Thanks, Peter -- Dr Peter Brett http://peter-b.co.uk/ _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
