I just got a Trimslice Pro (a friend wasn't using it), and I booted the Fedora-Minimal-armhfp-20-Beta-TC2-sda image from an SD card and started copying it to the internal SSD, and started getting errors on the serial console: [ 864.153171] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 864.382165] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 864.611136] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 864.616551] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? ... [ 923.473666] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 923.702667] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 923.931671] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 924.574479] end_request: I/O error, dev sda, sector 240082 [ 924.579969] Buffer I/O error on device sda1, logical block 119017 [ 924.586047] Buffer I/O error on device sda1, logical block 119018 [ 924.592124] Buffer I/O error on device sda1, logical block 119019 ... [ 1422.769804] Buffer I/O error on device sda1, logical block 135410 [ 1422.977894] EXT4-fs error (device sda1) in ext4_writepages:2540: IO failure [ 1423.163072] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal [ 1423.171705] EXT4-fs (sda1): Remounting filesystem read-only [ 1423.880858] EXT4-fs (sda1): ext4_writepages: jbd2_start: 1024 pages, ino 31; err -30 [ 1433.542568] hub 1-0:1.0: cannot reset port 1 (err = -110) This is using the 3.11.3-301.fc20.armv7hl kernel. Searching the list archives, I see this has come up before, but there doesn't seem to be a resolution: https://lists.fedoraproject.org/pipermail/arm/2013-January/005114.html Is this a kernel bug? Or is the SSD starting to fail? Thanks, Jeff _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
