This isn't rewriting the internal nand?
[ 35.091406] Creating 3 MTD partitions on "orion_nand":
[ 35.132266] 0x000000000000-0x000000100000 : "u-boot"
[ 35.203610] 0x000000100000-0x000000500000 : "uImage"
[ 35.272698] 0x000000500000-0x000008000000 : "root"
[ 35.132266] 0x000000000000-0x000000100000 : "u-boot"
[ 35.203610] 0x000000100000-0x000000500000 : "uImage"
[ 35.272698] 0x000000500000-0x000008000000 : "root"
I can't test atm. I
bricked it trying to switch u-boot since "saveenv" was not writing to the nand and saving.
reboot did work on it, before I bricked it. :)
Now with the jtag I am getting:
unknown NAND flash device found, manufacturer id: 0x00 device id: 0x00
in procedure 'nand'
in procedure 'nand'
I was getting a list of nand drivers and orion was listed but not loading.. Not exactly sure what to do here..
From: Jonathan Masters <jcm@xxxxxxxxxx>
To: Sean Omalley <omalley_s@xxxxxxxxxxxxxx>
Cc: "arm@xxxxxxxxxxxxxxxxxxxxxxx" <arm@xxxxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, December 27, 2012 5:16 AM
Subject: Re: Pogoplug pink E02
Not rewriting, but the OOB (Out Of Band) data for those blocks indicates they have failed. It's just informational.
--
--
Sent from my iPad
I was able to get the pogo pink to boot the F18-kirkwood-20121220.img.xz off a usb thumb drive.
It uses 1.1 usb which is doggy slow, and it is NOT saving env vars which is a PITA.
But they are:
setenv usb_boot 'if ext2load usb $usb_device 0x1100000 /uInitrd; then bootm 0x800000 0x1100000;else bootm 0x800000;fi;'
setenv usb_load_uimage 'mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /uImage'
setenv usb_root /dev/sda3
(this is the doozan uboot, but I am wondering if I shouldnt get something else. anyone tried anything else?)
I am also seeing this during the boot: Is this rewriting the nand??[ 34.638654] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), page size: 2048, OOB size: 64
[ 34.723723] Scanning device for bad blocks
[ 34.728417] Bad eraseblock 6 at 0x0000000c0000
[ 34.733218] Bad eraseblock 11 at 0x000000160000
[ 34.740889] Bad eraseblock 53 at 0x0000006a0000
[ 34.749666] Bad eraseblock 110 at 0x000000dc0000
[ 34.762924] Bad eraseblock 226 at 0x000001c40000
[ 34.774550] Bad eraseblock 320 at 0x000002800000
[ 34.786623] Bad eraseblock 420 at 0x000003480000
[ 34.794733] Bad eraseblock 467 at 0x000003a60000
[ 34.802999] Bad eraseblock 516 at 0x000004080000
[ 34.821846] Bad eraseblock 707 at 0x000005860000
[ 34.826595] Bad eraseblock 709 at 0x0000058a0000
[ 34.832545] Bad eraseblock 727 at 0x000005ae0000
[ 34.837667] Bad eraseblock 734 at 0x000005bc0000
[ 34.843248] Bad eraseblock 747 at 0x000005d60000
[ 35.091406] Creating 3 MTD partitions on "orion_nand":
[ 35.132266] 0x000000000000-0x000000100000 : "u-boot"
[ 35.203610] 0x000000100000-0x000000500000 : "uImage"
[ 35.272698] 0x000000500000-0x000008000000 : "root"
Also, the 'reboot' command isn't working on the guruplug plus. I haven't tried it on the pogoplug ironically as I have to leave right now.
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
_______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
