Hey all, Finally found some time to try to get this up and running, and of course I have trouble out of the starting gate. It's a fresh Guruplug and the F17 GA release image without any modifications. I wrote the kirkwood image onto a 16G USB flasg drive for boot/root and followed the rest of the instructions on the wiki ( both http://fedoraproject.org/wiki/Architectures/ARM/Fedora_17_GA and http://fedoraproject.org/wiki/Architectures/ARM/Kirkwood ). Alas, it's a no-go. The system isn't booting, it just hangs at "Uncompressing Linux... done, booting the kernel." I added the arcNumber and mainlineLinux variables, but it doesn't seem to make a difference whether I include them or not. I'm sure I'm missing something silly/stupid but googling all day hasn't helped. SO.. I'm reaching out. Here's the session log. Thanks, -derek U-Boot 2009.11-rc1-00602-g8e6db3d (Dec 24 2009 - 03:11:17) Marvell-Plug2 SoC: Kirkwood 88F6281_A0 DRAM: 512 MB NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1121 Initialized on egiga0 Hit any key to stop autoboot: 0 Marvell>> setenv arcNumber 2659 Marvell>> setenv mainlineLinux yes Marvell>> setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10' Marvell>> setenv loadInitrd 'fatload usb 0 0x7400000 uInitrd-kirkwood' Marvell>> setenv loadImage 'fatload usb 0 0x6400000 uImage-kirkwood' Marvell>> bootcmd 'usb start; ${loadImage}; ${loadInitrd} ; bootm 0x6400000 0x7400000' Marvell>> boot (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found reading uImage-kirkwood ................................................................................ 3291896 bytes read reading uInitrd-kirkwood ................................................................................ 10112646 bytes read ## Booting kernel from Legacy Image at 06400000 ... Image Name: 3.4.2-3.fc17.armv5tel.kirkwood Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3291832 Bytes = 3.1 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 07400000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10112582 Bytes = 9.6 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [hang] -- Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory Member, MIT Student Information Processing Board (SIPB) URL: http://web.mit.edu/warlord/ PP-ASEL-IA N1NWH warlord@xxxxxxx PGP key available _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
