Thanks for the hint. I just spoke to Marvin on IRC and he pointed me at it. Much appreciated. :) Gordan On 08/05/2011 10:48 PM, intersolar-direct wrote: > You can download kernel sources for Toshiba AC100 here http://gitorious.org/~marvin24/ac100/marvin24s-kernel > now .38 is last kernel > > > 06.08.2011, 00:26, "Gordan Bobic"<gordan@xxxxxxxxxx>: >> Hmm, I've had a look around on the link you provided but I can't find >> the kernel sources anywhere. Can you post a link to the sources and/or >> patches that make it work on the AC100? >> >> Gordan >> >> On 05/11/2011 06:54 PM, intersolar-direct wrote: >> >>> Sorry for delay. We have new, stable kernel 2.6.37.6 >>> Input devices works correctly, work Wireless& 3G& more stuff. Its >>> build w/o sound& uncorrectly sleep (suspend). >>> About Fedora on Toshiba AC100. We have launch new kernel 2.6.37 w. >>> Fedora ARM13 >>> This guide for install Fedora ARM on Toshiba AC100 2.6.37 >>> http://www.pole.su/Toshiba-AC100-Fedora-2.6.37-install-ENG.htm >>> if we change one string, we install Fedora onToshiba AC100 well: >>> This string: >>> wget http://ac100.gudinna.com/tegra-rootfs.tgz >>> tar xvf tegra-rootfs.tgz --numeric-owner -C /mnt/mmc tar xvf >>> tegra-rootfs.tgz - numeric-owner-C / mnt / mmc >>> need change to: >>> wget http://ausil.us/smartbook/smartbook-rootfs-f13.tar.bz2 >>> tar xvf smartbook-rootfs-f13.tar.bz2 --numeric-owner -C /mnt/mmc tar xvf >>> smartbook-rootfs-f13.tar.bz2 - numeric-owner-C / mnt / mmc >>> We use Fedora rootfs from Genesi Smartbook. But we have little problem - >>> FSTAB seeking rootfs in different place - mmcblk1p2 >>> Where need to change for FSTAB seeking rootfs in right place - mmcblk0p1 ? >>> 2. Two testing - new rootFS from this >>> http://fedoraproject.org/wiki/Architectures/ARM/F13-ARM-Beta2 (little hint) >>> If we use new rootfs from this - >>> http://scotland.proximity.on.ca/fedora-arm/beta/f13/rootfs-f13-beta3-2011-05-10.tar.bz2 >>> from 11-May-2011 10:52 116M - all working, but only comand prompt (NO >>> GUI). Its requered this comand (for working wireless internet): >>> apt-get install wpasupplicant >>> apt-get install aptitude >>> modprobe rt2800usb >>> wpa_passphrase ssid password> /etc/wpa_supplicant/ssid.conf >>> wpa_supplicant -c /etc/wpa_supplicant/ssid.conf -i wlan0 -D wext >>> after that (download& start GNOME) >>> apt-get install gnome >>> apt-get install xorg >>> >>> startx >>> -------- >>> Good luck >>> >>> _______________________________________________ >>> arm mailing list >>> arm@xxxxxxxxxxxxxxxxxxxxxxx >>> https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
