On Sun, May 15, 2011 at 10:35 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: > On Sun, May 15, 2011 at 5:15 AM, Scott M. Jones <scott@xxxxxxxx> wrote: >> I'm trying the F13-beta3 rootfs on a Beagleboard-XM and I get this at >> bootup: >> >> fsck: cannot check /dev/mmcblk0p2: fsck.ext3 not found >> fsck: cannot check /dev/mmcblk0p2: fsck.ext3 not found Note that the filesystem gets checked at every boot. On the ARM systems I have, just booting them tends to trigger a fsck. This is because the date that the filesystem was last mounted, is in the future. On boot, the clock of the board gets set to some date around 1970. To solve this, I tend to set the time between fsck intervals '0', which disables the check: # tune2fs -c 0 /dev/mmcblk0p2 In order to have the systemtime corrected, I use ntpdate. >> I checked in /sbin and there is a fsck.cramfs but no fsck.ext3. ÂMy root >> partition is ext3. > > The appropriate fsck utilities are usually installed by anaconda based > installs so maybe its something we explicitly need to add to the > rootfs. > >> I am able to fsck by moving the SD card to an F14/Intel system, but is >> there a package I can add to get the ext3 fsck on ARM? > > Yes, its in the Âe2fsprogs package. And in case you need any other binaries, you can use yum like # yum install /sbin/fsck.ext3 or # yum install e2fsprogs An "rpm -qf /sbin/fsck.ext3" on your F14 will also point you to the package that contains that file. Cheers, Niels _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
