Try adding "rootfstype=ubifs" to command line -
Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs
Thanks,
Rahul
On Tue, Jul 20, 2010 at 5:28 PM, Bernhard Schuster <schuster.bernhard@xxxxxxxxxxxxxx> wrote:
HiI finally got a running kernel compiled, flashed it successfully and got it to boot halfway. The only thing being missing is the console coming up. Here is the boot sequenz, and I think the kernel lacks a driver, but I do not understand which one is missing from that output.CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977CPU: VIVT data cache, VIVT instruction cacheMachine: Marvell GuruPlug Reference BoardMemory policy: ECC disabled, Data cache writebackBuilt 1 zonelists in Zone order, mobility grouping on. Total pages: 130048Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfsPID hash table entries: 2048 (order: 1, 8192 bytes)Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)Memory: 256MB 256MB = 512MB totalMemory: 512304k/512304k available, 11984k reserved, 0K highmemVirtual kernel memory layout:vector : 0xffff0000 - 0xffff1000 ( 4 kB)fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)DMA : 0xffc00000 - 0xffe00000 ( 2 MB)vmalloc : 0xe0800000 - 0xfe800000 ( 480 MB)lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)modules : 0xbf000000 - 0xc0000000 ( 16 MB).init : 0xc0008000 - 0xc0028000 ( 128 kB).text : 0xc0028000 - 0xc0657000 (6332 kB).data : 0xc0680000 - 0xc06b2ca0 ( 204 kB)SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1Hierarchical RCU implementation.RCU-based detection of stalled CPUs is disabled.Verbose stalled-CPUs detection is disabled.NR_IRQS:114Console: colour dummy device 80x30Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)pid_max: default: 32768 minimum: 301Security Framework initializedMount-cache hash table entries: 512CPU: Testing write buffer coherency: okNET: Registered protocol family 16Kirkwood: MV88F6281-A1, TCLK=200000000.Feroceon L2: Cache support initialised.bio: create slab <bio-0> at 0vgaarb: loadedSCSI subsystem initializedusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbcfg80211: Calling CRDA to update world regulatory domainSwitching to clocksource orion_clocksourceNET: Registered protocol family 2IP route cache hash table entries: 4096 (order: 2, 16384 bytes)TCP established hash table entries: 16384 (order: 5, 131072 bytes)TCP bind hash table entries: 16384 (order: 4, 65536 bytes)TCP: Hash tables configured (established 16384 bind 16384)TCP reno registeredUDP hash table entries: 256 (order: 0, 4096 bytes)UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)NET: Registered protocol family 1RPC: Registered udp transport module.RPC: Registered tcp transport module.RPC: Registered tcp NFSv4.1 backchannel transport module.NTFS driver 2.1.29 [Flags: R/W].JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.JFS: nTxBlock = 4002, nTxLock = 32019SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabledBtrfs loadedmsgmni has been set to 1000alg: No test for stdrng (krng)io scheduler noop registeredio scheduler deadline registeredio scheduler cfq registered (default)Serial: 8250/16550 driver, 2 ports, IRQ sharing disabledserial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550Aconsole [ttyS0] enabledloop: module loadedsata_mv sata_mv.0: version 1.28sata_mv sata_mv.0: slots 32 ports 1scsi0 : sata_mvata1: SATA max UDMA/133 irq 21GPIO NAND driver, �© 2004 Simtec ElectronicsNAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)Scanning device for bad blocksBad eraseblock 132 at 0x000001080000Bad eraseblock 3241 at 0x000019520000Bad eraseblock 3494 at 0x00001b4c0000Bad eraseblock 3850 at 0x00001e140000Bad eraseblock 3884 at 0x00001e580000Creating 3 MTD partitions on "orion_nand":0x000000000000-0x000000100000 : "u-boot"ftl_cs: FTL header not found.0x000000100000-0x000000500000 : "uImage"ftl_cs: FTL header not found.0x000000500000-0x000020000000 : "root"ftl_cs: FTL header not found.MV-643xx 10/100/1000 ethernet driver version 1.4mv643xx_eth smi: probednet eth0: port 0 with MAC address 00:50:43:67:64:06net eth1: port 0 with MAC address 00:50:43:67:64:07libertas_sdio: Libertas SDIO driverlibertas_sdio: Copyright Pierre Ossmanehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverorion-ehci orion-ehci.0: Marvell Orion EHCIorion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00hub 1-0:1.0: USB hub foundhub 1-0:1.0: 1 port detectedInitializing USB Mass Storage driver...usbcore: registered new interface driver usb-storageUSB Mass Storage support registered.usbcore: registered new interface driver ums-datafabusbcore: registered new interface driver ums-freecomusbcore: registered new interface driver ums-jumpshotusbcore: registered new interface driver ums-sddr09usbcore: registered new interface driver ums-sddr55mice: PS/2 mouse device common for all micertc-mv rtc-mv: rtc core: registered rtc-mv as rtc0i2c /dev entries drivercpuidle: using governor laddercpuidle: using governor menusdhci: Secure Digital Host Controller Interface driversdhci: Copyright(c) Pierre Ossmanmmc0: mvsdio driver initialized, lacking card detect (fall back to polling)via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.MV-CESA:Fallback driver 'hmac(sha1)' could not be loaded!alg: hash: Failed to load transform for mv-hmac-sha1: -2mv_xor_shared mv_xor_shared.0: Marvell shared XOR drivermv_xor_shared mv_xor_shared.1: Marvell shared XOR drivermv_xor mv_xor.0: Marvell XOR: ( xor cpy )mmc0: new high speed SDIO card at address 0001mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )ata1: SATA link down (SStatus 0 SControl F300)mv_xor mv_xor.2: Marvell XOR: ( xor cpy )mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )usbcore: registered new interface driver usbhidusbhid: USB HID core driveroprofile: hardware counters not availableoprofile: using timer interrupt.TCP cubic registeredNET: Registered protocol family 17lib80211: common routines for IEEE802.11 driversVFP support v0.3: not presentrtc-mv rtc-mv: setting system clock to 2010-07-20 07:56:52 UTC (1279612612)usb 1-1: new high speed USB device using orion-ehci and address 2hub 1-1:1.0: USB hub foundhub 1-1:1.0: 4 ports detectedusb 1-1.1: new high speed USB device using orion-ehci and address 3scsi1 : usb-storage 1-1.1:1.0scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 9909 PQ: 0 ANSI: 0sd 1:0:0:0: [sda] Attached SCSI removable disklibertas: can't load helper firmwarelibertas: failed to load helper firmwarelibertas_sdio: probe of mmc0:0001:1 failed with error -2VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0)Please append a correct "root=" boot option; here are the available partitions:1f00 1024 mtdblock0 (driver?)1f01 4096 mtdblock1 (driver?)1f02 519168 mtdblock2 (driver?)Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)[<c002d64c>] (unwind_backtrace+0x0/0xe4) from [<c003e048>] (panic+0x68/0xf8)[<c003e048>] (panic+0x68/0xf8) from [<c0008fbc>] (mount_block_root+0x1c4/0x20c)[<c0008fbc>] (mount_block_root+0x1c4/0x20c) from [<c0009194>] (prepare_namespace+0x8c/0x184)[<c0009194>] (prepare_namespace+0x8c/0x184) from [<c0008918>] (kernel_init+0x118/0x160)[<c0008918>] (kernel_init+0x118/0x160) from [<c00293dc>] (kernel_thread_exit+0x0/0x8)Any tipps?RegardsBernhard
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
_______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
