On Tuesday 25 August 2009 11:12:47 am Lluís Batlle wrote: > Create a linux fs in the usb disk as a new partition, and untar in it > the f11 root contents you can download from the web. Tried that. > Then set up uboot to load the kernel from the usb device partition, > setting the root= kernel parameter pointing to the proper scsi device > (as usb disks are seen as scsi devices). I haven't tried, but this > should be enough. I found this page: http://www.cyrius.com/debian/kirkwood/sheevaplug/unpack.html And made some changes. Let's just assume /dev/sda1 for the usb. setenv bootargs_root 'root=/dev/sda1 rootdelay=10' setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x0800000 /boot/uInitrd; ext2load usb 0:1 0x6400000 /boot/uImage-2.6.30-sheevaplug' setenv bootcmd 'setenv bootargs $(console) $(bootargs_root); run bootcmd_usb; bootm ' 0x6400000 When I boot, I get Bad Magic. I also noticed that the instructions use something called uInitrd. I have no idea where that came from. Wonder if that is the missing piece? -Steve _______________________________________________ fedora-arm mailing list fedora-arm@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-arm
