Michael DeHaan wrote:
Slinky wrote:
Make sure you have verbose enabled in /etc/xinetd.d/tftp
..
server_args = -s -v -v -v /tftpboot
...
Regarding your other post about server locations, here's your problem,
Mr. Slinky broke you :)
-s /tftpboot -vvv
You just set directory explicitly to "-v" :)
Doh! OK - I should have realized that given that I started getting the -v message right after :-). I changed it back, and now cobbler is syncing fine.
Thanks,
- Ole
You'll then see tftp hits in /var/log/messages. Example:
/var/log/messages.3:May 13 09:12:47 islinky in.tftpd[3556]: RRQ from
137.138.32.49 <http://137.138.32.49> filename tftpboot/dir/file.cbt
/var/log/messages.3:May 13 09:12:47 islinky in.tftpd[3556]: sending
NAK (1, File not found) to 137.138.32.49 <http://137.138.32.49>
It could just be some thing simple like you're dhcp points somewhere
but your tftp "files" are else where.
HTH
Slinky
2008/5/31 Ole Ersoy <ole.ersoy@xxxxxxxxx <mailto:ole.ersoy@xxxxxxxxx>>:
Any trouble shooting tips? I used to get a "boot" menu prior to
adding a system...
TIA,
- Ole
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx <mailto:et-mgmt-tools@xxxxxxxxxx>
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
--
Regards
Dan
------------------------------------------------------------------------
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
