Have you checked SELinux labelling? restorecon -vR /var/lib/xen* Regards Pablo -- Pablo Iranzo Gómez (http://Alufis35.uv.es/~iranzo/) (PGPKey Available on http://www.uv.es/~iranzop/PGPKey.pgp) -- Postulado de Boling sobre la Ley de Murphy: Si se encuentra bien, no se preocupe. Se le pasará On Wed, 12 Mar 2008, Demetri Mouratis wrote: > Hi List, > > I've attempted to follow the instructions for setting up Cobbler to > support kickstarting virtual (xen) installs. I'm invoking the > kickstart via the "ks" alias, defined as follows: > > alias ks='koan --virt --profile=centos5virt --server=172.16.16.1' > > Here's a look at the setup: > > [root@mosxato ~]# cobbler list > distro centos5-i386 > distro centos5-i386-xen > profile centos5virt > system default > repo centos4-i386 > repo centos5-i386 > > [root@mosxato ~]# ip addr show dev eth0 > 7: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue > link/ether 00:18:8b:f9:d9:23 brd ff:ff:ff:ff:ff:ff > inet 10.10.1.137/24 brd 10.10.1.255 scope global eth0 > inet 172.16.16.1/24 scope global eth0 > inet6 fe80::218:8bff:fef9:d923/64 scope link > valid_lft forever preferred_lft forever > > > [root@mosxato ~]# cat /etc/cobbler/dhcp.template > # ****************************************************************** > # Cobbler managed dhcpd.conf file > # > # generated from cobbler dhcp.conf template ($date) > # > # ****************************************************************** > > ddns-update-style interim; > > allow booting; > allow bootp; > > ignore client-updates; > set vendorclass = option vendor-class-identifier; > > subnet 192.168.122.0 netmask 255.255.255.0 {} > > > subnet 172.16.16.0 netmask 255.255.255.0 { > option routers 172.16.16.1; > option subnet-mask 255.255.255.0; > range dynamic-bootp 172.16.16.128 172.16.16.254; > filename "/pxelinux.0"; > default-lease-time 21600; > max-lease-time 43200; > next-server $next_server; > } > > $insert_cobbler_system_definitions > > My kickstarts are hanging here: > > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > TCP bic registered > Initializing IPsec netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI No-Shortcut mode > XENBUS: Device with no driver: device/vbd/51712 > XENBUS: Device with no driver: device/vif/0 > Freeing unused kernel memory: 168k freed > Write protecting the kernel read-only data: 360k > > Can anyone see what I have done wrong? The only part I'm not too sure > about is the 172.16.x.x network I've setup via iproute2. It seems > right but its been a while. I just need a rfc1918 address space to > create the VMs. > > Thanks. > > -D > > _______________________________________________ > et-mgmt-tools mailing list > et-mgmt-tools@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/et-mgmt-tools > _______________________________________________ et-mgmt-tools mailing list et-mgmt-tools@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/et-mgmt-tools
