Maute, Kevin P CTR AFRL/VAOO wrote:
Actually, the only cobbler.conf file in /etc/httpd/conf.d is the old one
which is ~ a week old, no *.rpmnew
If it's a week old, perhaps you already had the right contents, which are...
# This configuration file allows cobbler data
# to be accessed over HTTP.
AliasMatch ^/cblr(.*)?$ "/var/www/cobbler$1"
AliasMatch ^/cobbler_track(.*)?$ "/var/www/cobbler$1"
AliasMatch ^/cobbler(.*)?$ "/var/www/cobbler$1"
<Directory "/var/www/cobbler">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>
ProxyRequests off
ProxyPass /cobbler_api http://localhost:25151/
ProxyPassReverse /cobbler_api http://localhost:25151/
# TO DO: SSL
ProxyPass /cobbler_api_rw http://localhost:25152/
ProxyPassReverse /cobbler_api_rw http://localhost:25152/
===
snip.
If you're still not authenticating correctly, I'm not sure what's up.
I recently did make a patch that may play a role, however:
http://git.fedoraproject.org/?p=hosted/cobbler;a=commitdiff;h=cdc6eef91985545432ec222294b650e0d8269be1
(which will definitely be included in 0.6.2-2 when I push it)
You can check /var/log/cobbler/webui.log and
/var/log/cobbler/cobblerd.log and you may see some more information there.
-----Original Message-----
From: et-mgmt-tools-bounces@xxxxxxxxxx
[mailto:et-mgmt-tools-bounces@xxxxxxxxxx] On Behalf Of Michael DeHaan
Sent: Wednesday, September 26, 2007 11:04 AM
To: Fedora/Linux Management Tools
Subject: Re: [ANNOUNCE] Cobbler 0.6.2 (pre) release
Maute, Kevin P CTR AFRL/VAOO wrote:
Thanks Michael & Al!
I am somewhat of a newbie also with xmlrpc and am having trouble
authenticating to webui.
I have selinux disabled and have "xmlrpc_rw_enabled: 1" and did a
"service cobblerd restart" after updating to 0.6.2-1 from
0.6.1. I am
unclear what "anyusername = yourpasswordhere" means.
It means you can add your own username and password to the
config file
if you like.
The testuser really should be removed (and will be, for when
I push --
doing that now).
As for your connection problem, I can guess.
Since you had a previous cobbler install, check
/etc/httpd/conf.d/ and
look for a cobbler.conf.rpmnew.
That contains the new Apache routing for the XMLRPC parts.
Replace the
conf.d with the contents
of the rpmnew, start httpd, and you should be good to go.
I'll add that to the Wiki.
I tried the
testuser with its password but did not have any joy. I
also tried my
existing user/password combo. I am assuming auth.conf is similar to
.htaccess but am a little concerned about the clear text aspect.
We're going to SSLify XMLRPC communications later, I'm sure,
but here's
what we're doing right now.
Currently the xmlrpc interface for read-write operations is
binding only
to localhost. The WebUI
is connecting to it via localhost, and you can visit the WebUI with
https:// URLs. So your password
is never broadcast outside the cobbler server in plaintext.
auth.conf is not nearly as fancy as htaccess, it's just a list of
username and passwords. And it lives in /etc with
permissions such that only root can read it. We'll probably have more
sophisticated access control around
passwords later (pam maybe?) though for now, attaching only
to localhost
is secure when the user visits
via https://. We should probably put in a redirect to ensure
the WebUI
isn't visited with http:// just to protect
users who don't know better.
Thanks,
Kevin
-----Original Message-----
From: et-mgmt-tools-bounces@xxxxxxxxxx
[mailto:et-mgmt-tools-bounces@xxxxxxxxxx] On Behalf Of
Michael DeHaan
Sent: Tuesday, September 25, 2007 6:48 PM
To: 'et-mgmt-tools@xxxxxxxxxx'
Subject: [ANNOUNCE] Cobbler 0.6.2 (pre) release
It's new Cobbler & koan time.
The new feature this time is the Cobbler Web UI, for which
I have to
give a big hand to Al Tobey for coding up a *massive* chunk of it.
The WUI recently gained the ability to edit kickstart files and is
really shiny (IMHO) at this point. While the rest of
cobbler we'll
consider "stable", the Web UI component should be
considered a "beta"
just for this 1st release. Definitely help test it out though,
and report back your findings/ideas/comments. If you or
fellow admins
need to make tweaks from time to time and need a better
way of visualizing your provisioning configuration, the WebUI is
probably for you.
As mentioned before, the setup instructions are on the
Wiki, so just
follow these steps once things are installed:
https://hosted.fedoraproject.org/projects/cobbler/wiki/CobblerWebUi
Unless you've been requesting a feature (in which case, it
probably was
added), the other changes are relatively minor
and you might not notice them. I've sent emails out about
most of them
already. One thing admins should note is that
/var/lib/cobbler/settings is finally packaged as a config file, so
you'll get an "rpmnew" for the new settings. That will
be moved into /etc probably in the next release and all
will be right
with config files :)
So ... I'm uploading the 0.6.2 RPM's today for folks to have
a chance to
try things out before pushing to the mirrors on Friday.
http://cobbler.et.redhat.com/download/cobbler-0.6.2-1.src.rpm
http://cobbler.et.redhat.com/download/koan-0.6.2-1.src.rpm
FYI -- The changelogs might look rather long, though it's
been about a
month since the last release and lots of folks have been
working off the source-control versions. So things are
rather well
tested...
For Cobbler:
- cobbler repo auto-add to discover yum repos automatically
(requires a
rather new yum)
- fix bug that allows empty mac addresses (None) in dhcpd.conf
- kickstarts automatically save kickstart file used to
/root/cobbler.ks
- allow multiple (comma-seperated) values for --virt-size
- removed deprecated 'enchant' function (use SSH and koan instead)
- cleanup of a few unused settings
- allow for serialization modules to be selected in
/etc/cobbler/modules.conf
- patch to allow for reposync of specific repos, even if not
set to update
- added --dhcp-tag section for better DHCP customization (esp with
multiple subnets)
- added Apache proxying around XMLRPC port for wider network access
- refactor XMLRPC API and establish a read-write API
- allow for configuring of read-write XMLRPC users in
/etc/cobbler/auth.conf
- WebUI
- packaged /var/lib/cobbler/settings as a config file
- added BuildRequires to help build on other platforms
- relocate cgi-bin files to cgi-bin/cobbler for namespacing
- fix syslog logging for systems not in the cobbler DB.
For koan
- Allow for multiple values (comma seperated) to --virt-path
- Allow for multiple virt file sizes
- Refactoring around the virt bits
- Remove legacy sys.path hack as enchant has been removed
(just use SSH)
- Try port 80 proxied XMLRPC by default (first) before trying 25151
As usual, a huge thanks to everyone who submitted patches,
emails, or
hangs out in #cobbler.
--Michael
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
