On Fri, 31 Aug 2007, Bernhard Kaindl wrote:
Note: The message which was displayed when the gtk-vnc widget got the
ECONNREFUSED (Connection refused) error when connecting to <hostname>:5900
sounds a bit misleading to me.
socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 4
connect(4, {sa_family=AF_INET, sin_port=htons(5900), sin_addr=inet_addr("<my
host's LAN IP address here>")}, 16) = -1 ECONNREFUSED (Connection refused)
The message resulting from this was:
"Console was disconnected from guest"
Another message like this still apppeared when starting a new QEMU / KVM guest
from virt-manager, and the changes which I did in that regard to fix this
are found in the cumulated patch below.
I added some comments, so I also attached it as a MIME attachment:
--- virt-manager--devel/src/virtManager/console.py 2007/08/30 23:11:35 1.1
+++ virt-manager--devel/src/virtManager/console.py 2007/08/31 00:53:58
@@ -74,8 +74,9 @@
self.window.get_widget("console-pages").append_page(self.vncViewer)
self.vncViewer.realize()
self.vncViewer.show()
- self.vncViewerFailures = 0
+ self.vncViewerRetriesScheduled = 0
# Simple rename to be more exact to what I'm using it now.
self.vncViewerRetryDelay = 125
+ self.connected = 0
# New: to keep track if connected or not (stop retries when connected)
self.notifyID = None
try:
@@ -231,44 +232,61 @@
return 1
return 0
+ def view_vm_status(self):
+ status = self.vm.status()
+ if status == libvirt.VIR_DOMAIN_SHUTOFF:
+ self.activate_unavailable_page(_("Guest not running"))
+ else:
+ if status == libvirt.VIR_DOMAIN_CRASHED:
+ self.activate_unavailable_page(_("Guest has crashed"))
# Helper for displaying more accurate status
+
def _vnc_disconnected(self, src):
+ self.connected = 0
logging.debug("VNC disconnected")
- self.vncViewerFailures = self.vncViewerFailures + 1
- self.activate_unavailable_page(_("Console was disconnected from guest"))
# separately moved away to other places, see futher and it becomes clear
if not self.is_visible():
return
- if self.vncViewerFailures < 10:
- self.schedule_retry()
- else:
- logging.error("Too many connection failures, not retrying again")
+ if self.vm.status() in [ libvirt.VIR_DOMAIN_SHUTOFF, libvirt.VIR_DOMAIN_CRASHED ]:
+ self.view_vm_status()
+ return
# Well, there is no point in scheduling login retries to the gues when it is down
# make use of self.view_vm_status() to view more explicit status information
+
+ self.activate_unavailable_page(_("TCP/IP error: VNC connection to hypervisor host got refused or disconnected!"))
# Updated version of "Console was disconnected from guest" until gtk-vnc supports the signal vnc-connection-refused
+ self.schedule_retry()
# retry couting moved to schedule_retry, so no counting done here (and elsewhere)
def _vnc_initialized(self, src):
+ self.connected = 1
logging.debug("VNC initialized")
self.activate_viewer_page()
# Had a succesfull connect, so reset counters now
- self.vncViewerFailures = 0
+ self.vncViewerRetriesScheduled = 0
# Simple rename to be more exact to what I'm using it now.
self.vncViewerRetryDelay = 125
def schedule_retry(self):
+ self.vncViewerRetriesScheduled = self.vncViewerRetriesScheduled + 1
+ if self.vncViewerRetriesScheduled >= 10:
+ logging.error("Too many connection failures, not retrying again")
+ return
# retry couting moved to schedule_retry, retriy counting for all users of this function
logging.warn("Retrying connection in %d ms", self.vncViewerRetryDelay)
gobject.timeout_add(self.vncViewerRetryDelay, self.retry_login)
if self.vncViewerRetryDelay < 2000:
self.vncViewerRetryDelay = self.vncViewerRetryDelay * 2
def retry_login(self):
+ if self.connected:
+ return
# retrying login if we are already logged in results in strange errors
gtk.gdk.threads_enter()
try:
logging.debug("Got timed retry")
self.try_login()
- return False
+ return
# return code not used AFAICS, can as well just return without status
finally:
gtk.gdk.threads_leave()
def try_login(self, src=None):
if self.vm.get_id() < 0:
- self.activate_unavailable_page(_("Console not available for inactive guest"))
# self.vm.get_id() < 0 means that the guest is not running, but "Console not available for inactive guest"
# reads like a error meesage so make it more simple:
+ self.activate_unavailable_page(_("Guest not running"))
# and schedule a retry in case the guest was just started but takes ~300ms to start in case of QEMU/KVM:
+ self.schedule_retry()
return
logging.debug("Trying console login")
@@ -320,7 +338,7 @@
self.vncViewer.set_credential(credList[i], "libvirt")
else:
# Force it to stop re-trying
- self.vncViewerFailures = 10
+ self.vncViewerRetriesScheduled = 10
# Simple rename to be more exact to what I'm using it now.
self.vncViewer.close()
self.activate_unavailable_page(_("Unsupported console authentication type"))
@@ -503,7 +521,7 @@
if self.window.get_widget("console-pages").get_current_page() != PAGE_UNAVAILABLE:
self.vncViewer.close()
self.window.get_widget("console-pages").set_current_page(PAGE_UNAVAILABLE)
- self.activate_unavailable_page(_("Console not available for inactive guest"))
+ self.view_vm_status()
# display more exact message
else:
if status == libvirt.VIR_DOMAIN_PAUSED:
if self.window.get_widget("console-pages").get_current_page() == PAGE_VNCVIEWER:
@@ -543,7 +561,7 @@
if self.vncViewer.is_open():
self.activate_viewer_page()
else:
- self.vncViewerFailures = 0
+ self.vncViewerRetriesScheduled = 0
# Simple rename to be more exact to what I'm using it now.
self.vncViewerRetryDelay = 125
self.try_login()
self.ignorePause = False
Without this patch, a the console of a newly started KVM / QEMU guest is only shown after
toggling pause if the console window was open while starting it, and also some intermittent
messages which could cause unneccesary confusion are displayed. I can split it up, but
it should be rather clear what it does.
Bernhard--- virt-manager--devel/src/virtManager/console.py 2007/08/30 23:11:35 1.1
+++ virt-manager--devel/src/virtManager/console.py 2007/08/31 00:53:58
@@ -74,8 +74,9 @@
self.window.get_widget("console-pages").append_page(self.vncViewer)
self.vncViewer.realize()
self.vncViewer.show()
- self.vncViewerFailures = 0
+ self.vncViewerRetriesScheduled = 0
self.vncViewerRetryDelay = 125
+ self.connected = 0
self.notifyID = None
try:
@@ -231,44 +232,61 @@
return 1
return 0
+ def view_vm_status(self):
+ status = self.vm.status()
+ if status == libvirt.VIR_DOMAIN_SHUTOFF:
+ self.activate_unavailable_page(_("Guest not running"))
+ else:
+ if status == libvirt.VIR_DOMAIN_CRASHED:
+ self.activate_unavailable_page(_("Guest has crashed"))
+
def _vnc_disconnected(self, src):
+ self.connected = 0
logging.debug("VNC disconnected")
- self.vncViewerFailures = self.vncViewerFailures + 1
- self.activate_unavailable_page(_("Console was disconnected from guest"))
if not self.is_visible():
return
- if self.vncViewerFailures < 10:
- self.schedule_retry()
- else:
- logging.error("Too many connection failures, not retrying again")
+ if self.vm.status() in [ libvirt.VIR_DOMAIN_SHUTOFF, libvirt.VIR_DOMAIN_CRASHED ]:
+ self.view_vm_status()
+ return
+
+ self.activate_unavailable_page(_("TCP/IP error: VNC connection to hypervisor host got refused or disconnected!"))
+ self.schedule_retry()
def _vnc_initialized(self, src):
+ self.connected = 1
logging.debug("VNC initialized")
self.activate_viewer_page()
# Had a succesfull connect, so reset counters now
- self.vncViewerFailures = 0
+ self.vncViewerRetriesScheduled = 0
self.vncViewerRetryDelay = 125
def schedule_retry(self):
+ self.vncViewerRetriesScheduled = self.vncViewerRetriesScheduled + 1
+ if self.vncViewerRetriesScheduled >= 10:
+ logging.error("Too many connection failures, not retrying again")
+ return
logging.warn("Retrying connection in %d ms", self.vncViewerRetryDelay)
gobject.timeout_add(self.vncViewerRetryDelay, self.retry_login)
if self.vncViewerRetryDelay < 2000:
self.vncViewerRetryDelay = self.vncViewerRetryDelay * 2
def retry_login(self):
+ if self.connected:
+ return
gtk.gdk.threads_enter()
try:
logging.debug("Got timed retry")
self.try_login()
- return False
+ return
finally:
gtk.gdk.threads_leave()
def try_login(self, src=None):
if self.vm.get_id() < 0:
- self.activate_unavailable_page(_("Console not available for inactive guest"))
+ self.activate_unavailable_page(_("Guest not running"))
+ self.schedule_retry()
return
logging.debug("Trying console login")
@@ -320,7 +338,7 @@
self.vncViewer.set_credential(credList[i], "libvirt")
else:
# Force it to stop re-trying
- self.vncViewerFailures = 10
+ self.vncViewerRetriesScheduled = 10
self.vncViewer.close()
self.activate_unavailable_page(_("Unsupported console authentication type"))
@@ -503,7 +521,7 @@
if self.window.get_widget("console-pages").get_current_page() != PAGE_UNAVAILABLE:
self.vncViewer.close()
self.window.get_widget("console-pages").set_current_page(PAGE_UNAVAILABLE)
- self.activate_unavailable_page(_("Console not available for inactive guest"))
+ self.view_vm_status()
else:
if status == libvirt.VIR_DOMAIN_PAUSED:
if self.window.get_widget("console-pages").get_current_page() == PAGE_VNCVIEWER:
@@ -543,7 +561,7 @@
if self.vncViewer.is_open():
self.activate_viewer_page()
else:
- self.vncViewerFailures = 0
+ self.vncViewerRetriesScheduled = 0
self.vncViewerRetryDelay = 125
self.try_login()
self.ignorePause = False
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
