This patch adds code that gets lba and boot device information on
SuSE systems, which is done by looking at the commands that were
used to install grub on that system, and match information with
grub's device.map file.
Changes from v1:
* Fixes for issues pointed by Peter Jones <pjones@xxxxxxxxxx>
* Add support for specifying paths for SuSE configuration files
on environment variables, to make it possible to test this
Signed-off-by: Cleber Rosa <crosa@xxxxxxxxxx>
---
grubby.c | 300 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 293 insertions(+), 7 deletions(-)
diff --git a/grubby.c b/grubby.c
index 754c684..1444fc4 100644
--- a/grubby.c
+++ b/grubby.c
@@ -2050,6 +2050,267 @@ void displayEntry(struct singleEntry * entry, const char * prefix, int index) {
}
}
+int isSuseSystem(void) {
+ const char * path;
+ const static char default_path[] = "/etc/SuSE-release";
+
+ if ((path = getenv("GRUBBY_SUSE_RELEASE")) == NULL)
+ path = default_path;
+
+ if (!access(path, R_OK))
+ return 1;
+ return 0;
+}
+
+int isSuseGrubConf(const char * path) {
+ FILE * grubConf;
+ char * line = NULL;
+ size_t len = 0, res = 0;
+
+ grubConf = fopen(path, "r");
+ if (!grubConf) {
+ dbgPrintf("Could not open SuSE configuration file '%s'\n", path);
+ return 0;
+ }
+
+ while ((res = getline(&line, &len, grubConf)) != -1) {
+ if (!strncmp(line, "setup", 5)) {
+ fclose(grubConf);
+ free(line);
+ return 1;
+ }
+ }
+
+ dbgPrintf("SuSE configuration file '%s' does not appear to be valid\n",
+ path);
+
+ fclose(grubConf);
+ free(line);
+ return 0;
+}
+
+int suseGrubConfGetLba(const char * path, int * lbaPtr) {
+ FILE * grubConf;
+ char * line = NULL;
+ size_t res = 0, len = 0;
+
+ if (!path) return 1;
+ if (!lbaPtr) return 1;
+
+ grubConf = fopen(path, "r");
+ if (!grubConf) return 1;
+
+ while ((res = getline(&line, &len, grubConf)) != -1) {
+ if (line[res - 1] == '\n')
+ line[res - 1] = '\0';
+ else if (len > res)
+ line[res] = '\0';
+ else {
+ line = realloc(line, res + 1);
+ line[res] = '\0';
+ }
+
+ if (!strncmp(line, "setup", 5)) {
+ if (strstr(line, "--force-lba")) {
+ *lbaPtr = 1;
+ } else {
+ *lbaPtr = 0;
+ }
+ dbgPrintf("lba: %i\n", *lbaPtr);
+ break;
+ }
+ }
+
+ free(line);
+ fclose(grubConf);
+ return 0;
+}
+
+int suseGrubConfGetInstallDevice(const char * path, char ** devicePtr) {
+ FILE * grubConf;
+ char * line = NULL;
+ size_t res = 0, len = 0;
+ char * lastParamPtr = NULL;
+ char * secLastParamPtr = NULL;
+ char installDeviceNumber = '\0';
+ char * bounds = NULL;
+
+ if (!path) return 1;
+ if (!devicePtr) return 1;
+
+ grubConf = fopen(path, "r");
+ if (!grubConf) return 1;
+
+ while ((res = getline(&line, &len, grubConf)) != -1) {
+ if (strncmp(line, "setup", 5))
+ continue;
+
+ if (line[res - 1] == '\n')
+ line[res - 1] = '\0';
+ else if (len > res)
+ line[res] = '\0';
+ else {
+ line = realloc(line, res + 1);
+ line[res] = '\0';
+ }
+
+ lastParamPtr = bounds = line + res;
+
+ /* Last parameter in grub may be an optional IMAGE_DEVICE */
+ while (!isspace(*lastParamPtr))
+ lastParamPtr--;
+ lastParamPtr++;
+
+ secLastParamPtr = lastParamPtr - 2;
+ dbgPrintf("lastParamPtr: %s\n", lastParamPtr);
+
+ if (lastParamPtr + 3 > bounds) {
+ dbgPrintf("lastParamPtr going over boundary");
+ fclose(grubConf);
+ free(line);
+ return 1;
+ }
+ if (!strncmp(lastParamPtr, "(hd", 3))
+ lastParamPtr += 3;
+ dbgPrintf("lastParamPtr: %c\n", *lastParamPtr);
+
+ /*
+ * Second last parameter will decide wether last parameter is
+ * an IMAGE_DEVICE or INSTALL_DEVICE
+ */
+ while (!isspace(*secLastParamPtr))
+ secLastParamPtr--;
+ secLastParamPtr++;
+
+ if (secLastParamPtr + 3 > bounds) {
+ dbgPrintf("secLastParamPtr going over boundary");
+ fclose(grubConf);
+ free(line);
+ return 1;
+ }
+ dbgPrintf("secLastParamPtr: %s\n", secLastParamPtr);
+ if (!strncmp(secLastParamPtr, "(hd", 3)) {
+ secLastParamPtr += 3;
+ dbgPrintf("secLastParamPtr: %c\n", *secLastParamPtr);
+ installDeviceNumber = *secLastParamPtr;
+ } else {
+ installDeviceNumber = *lastParamPtr;
+ }
+
+ *devicePtr = malloc(6);
+ snprintf(*devicePtr, 6, "(hd%c)", installDeviceNumber);
+ dbgPrintf("installDeviceNumber: %c\n", installDeviceNumber);
+ fclose(grubConf);
+ free(line);
+ return 0;
+ }
+
+ free(line);
+ fclose(grubConf);
+ return 1;
+}
+
+int grubGetBootFromDeviceMap(const char * device,
+ char ** bootPtr) {
+ FILE * deviceMap;
+ char * line = NULL;
+ size_t res = 0, len = 0;
+ char * devicePtr;
+ char * bounds = NULL;
+ const char * path;
+ const static char default_path[] = "/boot/grub/device.map";
+
+ if (!device) return 1;
+ if (!bootPtr) return 1;
+
+ if ((path = getenv("GRUBBY_GRUB_DEVICE_MAP")) == NULL)
+ path = default_path;
+
+ dbgPrintf("opening grub device.map file from: %s\n", path);
+ deviceMap = fopen(path, "r");
+ if (!deviceMap)
+ return 1;
+
+ while ((res = getline(&line, &len, deviceMap)) != -1) {
+ if (!strncmp(line, "#", 1))
+ continue;
+
+ if (line[res - 1] == '\n')
+ line[res - 1] = '\0';
+ else if (len > res)
+ line[res] = '\0';
+ else {
+ line = realloc(line, res + 1);
+ line[res] = '\0';
+ }
+
+ devicePtr = line;
+ bounds = line + res;
+
+ while ((isspace(*line) && ((devicePtr + 1) <= bounds)))
+ devicePtr++;
+ dbgPrintf("device: %s\n", devicePtr);
+
+ if (!strncmp(devicePtr, device, strlen(device))) {
+ devicePtr += strlen(device);
+ while (isspace(*devicePtr) && ((devicePtr + 1) <= bounds))
+ devicePtr++;
+
+ *bootPtr = strdup(devicePtr);
+ break;
+ }
+ }
+
+ free(line);
+ fclose(deviceMap);
+ return 0;
+}
+
+int suseGrubConfGetBoot(const char * path, char ** bootPtr) {
+ char * grubDevice;
+
+ if (suseGrubConfGetInstallDevice(path, &grubDevice))
+ dbgPrintf("error looking for grub installation device\n");
+ else
+ dbgPrintf("grubby installation device: %s\n", grubDevice);
+
+ if (grubGetBootFromDeviceMap(grubDevice, bootPtr))
+ dbgPrintf("error looking for grub boot device\n");
+ else
+ dbgPrintf("grubby boot device: %s\n", *bootPtr);
+
+ free(grubDevice);
+ return 0;
+}
+
+int parseSuseGrubConf(int * lbaPtr, char ** bootPtr) {
+ /*
+ * This SuSE grub configuration file at this location is not your average
+ * grub configuration file, but instead the grub commands used to setup
+ * grub on that system.
+ */
+ const char * path;
+ const static char default_path[] = "/etc/grub.conf";
+
+ if ((path = getenv("GRUBBY_SUSE_GRUB_CONF")) == NULL)
+ path = default_path;
+
+ if (!isSuseGrubConf(path)) return 1;
+
+ if (lbaPtr) {
+ *lbaPtr = 0;
+ if (suseGrubConfGetLba(path, lbaPtr))
+ return 1;
+ }
+
+ if (bootPtr) {
+ *bootPtr = NULL;
+ suseGrubConfGetBoot(path, bootPtr);
+ }
+
+ return 0;
+}
+
int parseSysconfigGrub(int * lbaPtr, char ** bootPtr) {
FILE * in;
char buf[1024];
@@ -2098,12 +2359,25 @@ int parseSysconfigGrub(int * lbaPtr, char ** bootPtr) {
}
void dumpSysconfigGrub(void) {
- char * boot;
+ char * boot = NULL;
int lba;
- if (!parseSysconfigGrub(&lba, &boot)) {
- if (lba) printf("lba\n");
- if (boot) printf("boot=%s\n", boot);
+ if (!isSuseSystem()) {
+ if (parseSysconfigGrub(&lba, &boot)) {
+ free(boot);
+ return;
+ }
+ } else {
+ if (parseSuseGrubConf(&lba, &boot)) {
+ free(boot);
+ return;
+ }
+ }
+
+ if (lba) printf("lba\n");
+ if (boot) {
+ printf("boot=%s\n", boot);
+ free(boot);
}
}
@@ -2917,9 +3191,14 @@ int checkForGrub(struct grubConfig * config) {
int fd;
unsigned char bootSect[512];
char * boot;
+ int onSuse;
- if (parseSysconfigGrub(NULL, &boot))
- return 0;
+ onSuse = isSuseSystem();
+ if (!onSuse) {
+ if (parseSysconfigGrub(NULL, &boot)) return 0;
+ } else {
+ if (parseSuseGrubConf(NULL, &boot)) return 0;
+ }
/* assume grub is not installed -- not an error condition */
if (!boot)
@@ -2938,7 +3217,14 @@ int checkForGrub(struct grubConfig * config) {
}
close(fd);
- return checkDeviceBootloader(boot, bootSect);
+ if (!onSuse)
+ return checkDeviceBootloader(boot, bootSect);
+ else
+ /*
+ * The more elaborate checks do not work on SuSE. The checks done
+ * seem to be reasonble (at least for now), so just return success
+ */
+ return 2;
}
int checkForExtLinux(struct grubConfig * config) {
--
1.7.10.2
_______________________________________________
Anaconda-devel-list mailing list
Anaconda-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/anaconda-devel-list
