[PATCH] Rework the upgrade swap suggestion (#684603).

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



First, no longer mention the 2.4 kernel.  That was only for people updating
from RHL.  Second, use the iutil swap suggestion instead of coming up with
a different one.  This means we'll suggest the same amount on upgrade that
we would use on a fresh install.
---
 pyanaconda/iw/upgrade_swap_gui.py |   16 +++-----------
 pyanaconda/upgrade.py             |   40 ++++++------------------------------
 2 files changed, 11 insertions(+), 45 deletions(-)

diff --git a/pyanaconda/iw/upgrade_swap_gui.py b/pyanaconda/iw/upgrade_swap_gui.py
index b57d071..ddb8735 100644
--- a/pyanaconda/iw/upgrade_swap_gui.py
+++ b/pyanaconda/iw/upgrade_swap_gui.py
@@ -89,18 +89,12 @@ class UpgradeSwapWindow (InstallWindow):
         box = gtk.VBox (False, 5)
         box.set_border_width (5)
 
-	label = gtk.Label (_("Recent kernels (2.4 or newer) need significantly more "
-                            "swap than older kernels, up to twice "
-                            "the amount of RAM on the system.  "
-                            "You currently have %dMB of swap configured, but "
-                            "you may create additional swap space on one of "
-                            "your file systems now.")
-                          % (iutil.swapAmount() / 1024) +
-                          _("\n\nThe installer has detected %s MB of RAM.\n") %
-                          (iutil.memInstalled()/1024))
+        label = gtk.Label(_("You currently have %dMB of swap configured, which "
+                            "is less than the recommended miminum of %sMB.  You "
+                            "may optionally create more swap space on one of "
+                            "your file systems now.") % (iutil.swapAmount()/1024, iutil.swapSuggestion()[0]/1024))
 
         label.set_alignment (0.5, 0.0)
-#        label.set_size_request(400, 200)
         label.set_line_wrap (True)
         box.pack_start(label, False)
 
@@ -115,7 +109,6 @@ class UpgradeSwapWindow (InstallWindow):
 
         self.swapbox = gtk.VBox(False, 5)
         box.pack_start(self.swapbox, False)
-        
 
         label = gui.MnemonicLabel (_("Select the _partition to put the swap file on:"))
         a = gtk.Alignment(0.2, 0.5)
@@ -201,7 +194,6 @@ class UpgradeSwapWindow (InstallWindow):
         return rc
 
     def swapTooBig(self):
-        
         rc = self.intf.messageWindow(_("Warning"), 
                     _("There is not enough space on the device you "
 			  "selected for the swap partition."),
diff --git a/pyanaconda/upgrade.py b/pyanaconda/upgrade.py
index b3560dd..51b25bf 100644
--- a/pyanaconda/upgrade.py
+++ b/pyanaconda/upgrade.py
@@ -165,32 +165,12 @@ def restoreTime(anaconda):
 
 # returns None if no more swap is needed
 def upgradeSwapSuggestion(anaconda):
-    # mem is in kb -- round it up to the nearest 4Mb
-    mem = iutil.memInstalled()
-    rem = mem % 16384
-    if rem:
-	mem = mem + (16384 - rem)
-    mem = mem / 1024
+    swap = iutil.swapAmount()/1024
+    (suggestedMin, suggestedMax) = iutil.swapSuggestion(quiet=1)
 
     anaconda.dispatch.skipStep("addswap", 0)
-    
-    # don't do this if we have more then 250 MB
-    if mem > 250:
-        anaconda.dispatch.skipStep("addswap", 1)
-        return
-    
-    swap = iutil.swapAmount() / 1024
-
-    # if we have twice as much swap as ram and at least 192 megs
-    # total, we're safe 
-    if (swap >= (mem * 1.5)) and (swap + mem >= 192):
-        anaconda.dispatch.skipStep("addswap", 1)
-	return
-
-    # if our total is 512 megs or more, we should be safe
-    if (swap + mem >= 512):
-        anaconda.dispatch.skipStep("addswap", 1)
-	return
+    if suggestedMin <= swap:
+        anaconda.dispatch.skipStep("addswap", permanent=1)
 
     fsList = []
 
@@ -205,18 +185,12 @@ def upgradeSwapSuggestion(anaconda):
                 info = (device, space)
                 fsList.append(info)
 
-    suggestion = mem * 2 - swap
-    if (swap + mem + suggestion) < 192:
-        suggestion = 192 - (swap + mem)
-    if suggestion < 32:
-        suggestion = 32
-    suggSize = 0
-    suggMnt = None
+    suggDev = None
     for (device, size) in fsList:
-	if (size > suggSize) and (size > (suggestion + 100)):
+        if size > suggestedMin+100:
 	    suggDev = device
 
-    anaconda.upgradeSwapInfo = (fsList, suggestion, suggDev)
+    anaconda.upgradeSwapInfo = (fsList, suggestedMin, suggDev)
 
 # XXX handle going backwards
 def upgradeMountFilesystems(anaconda):
-- 
1.7.4.1

_______________________________________________
Anaconda-devel-list mailing list
Anaconda-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/anaconda-devel-list


[Index of Archives]     [Kickstart]     [Fedora Users]     [Fedora Legacy List]     [Fedora Maintainers]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]
  Powered by Linux