Pass configured network device on s390 to loader via /tmp/s390net rather
than the DEVICE environment variable. Using the environment variable only
works when loader is the child process of /sbin/init, which only happens
with RUNKS=1. Other installs on s390 invoke loader as the ssh login shell,
so they never see the DEVICE environment variable.
---
booty/bootloaderInfo.py | 15 ---------------
loader/linuxrc.s390 | 45 +++++++--------------------------------------
loader/loader.c | 39 +++++++++++++++++++++++++++++++++------
3 files changed, 40 insertions(+), 59 deletions(-)
diff --git a/booty/bootloaderInfo.py b/booty/bootloaderInfo.py
index d019edf..a0a7b4d 100644
--- a/booty/bootloaderInfo.py
+++ b/booty/bootloaderInfo.py
@@ -172,26 +172,11 @@ class KernelArguments:
def __init__(self, anaconda):
newArgs = []
- cfgFilename = "/tmp/install.cfg"
self.anaconda = anaconda
if iutil.isS390():
self.cargs = []
- f = open(cfgFilename)
- for line in f:
- try:
- (vname,vparm) = line.split('=', 1)
- vname = vname.strip()
- vparm = vparm.replace('"','')
- vparm = vparm.strip()
- if vname == "CHANDEV":
- self.cargs.append(vparm)
- if vname == "QETHPARM":
- self.cargs.append(vparm)
- except Exception, e:
- pass
- f.close()
# look for kernel arguments we know should be preserved and add them
ourargs = ["speakup_synth", "apic", "noapic", "apm", "ide", "noht",
diff --git a/loader/linuxrc.s390 b/loader/linuxrc.s390
index 614f7ff..356426e 100644
--- a/loader/linuxrc.s390
+++ b/loader/linuxrc.s390
@@ -2973,49 +2973,18 @@ done
# [ "$ipv6" ] && echo "IPV6=yes"
# transfer options into install environment
-cat > /tmp/install.cfg << EOF
-LANG="$LANG"
-S390ARCH="$S390ARCH"
-TEXTDOMAIN="$TEXTDOMAIN"
-TEXTDOMAINDIR="$TEXTDOMAINDIR"
-PORTNAME="$PORTNAME"
-HOSTNAME="$HOSTNAME"
-DEVICE="$DEVICE"
-NETTYPE="$NETTYPE"
-IPADDR="$IPADDR"
-GATEWAY="$GATEWAY"
-MTU="$MTU"
-NETWORK="$NETWORK"
-NETMASK="$NETMASK"
-BROADCAST="$BROADCAST"
-SEARCHDNS="$SEARCHDNS"
-PEERID="$PEERID"
-SUBCHANNELS="$SUBCHANNELS"
-ONBOOT="yes"
-CTCPROT="$CTCPROT"
-EOF
+# loader now uses ifcfg instead of install.cfg to receive our network config
+
+# additionally, loader's readNetInfo needs to know our DEVICE name
+echo $DEVICE > /tmp/s390net
+
if [ "$ipv6" ]; then
DNS1=$(echo $DNS | cut -d ',' -f 1)
- echo DNS=\"$DNS1\" >> /tmp/install.cfg
- echo DNS1=\"$DNS1\" >> /tmp/install.cfg
- echo DNS2=\"$(echo $DNS | cut -d ',' -f 2)\" >> /tmp/install.cfg
+ DNS2=$(echo $DNS | cut -d ',' -f 2)
else
DNS1=$(echo $DNS | cut -d ':' -f 1)
- echo DNS=\"$DNS1\" >> /tmp/install.cfg
- echo DNS1=\"$DNS1\" >> /tmp/install.cfg
- echo DNS2=\"$(echo $DNS | cut -d ':' -f 2)\" >> /tmp/install.cfg
+ DNS2=$(echo $DNS | cut -d ':' -f 2)
fi
-cat >> /tmp/install.cfg << EOF
-export LANG PORTNAME S390ARCH TEXTDOMAIN TEXTDOMAINDIR
-export HOSTNAME DEVICE NETTYPE IPADDR GATEWAY MTU
-export NETWORK NETMASK BROADCAST DNS DNS1 DNS2 SEARCHDNS
-export PEERID ONBOOT SUBCHANNELS CTCPROT
-EOF
-# immediately read it in again to export these into the shell below
-. /tmp/install.cfg
-if [ -z "$testing" ]; then
- cat /tmp/install.cfg >> /etc/profile
-fi # testing
NETSCRIPTS="/etc/sysconfig/network-scripts"
IFCFGFILE="$NETSCRIPTS/ifcfg-$DEVICE"
diff --git a/loader/loader.c b/loader/loader.c
index 14c7be6..a154ecc 100644
--- a/loader/loader.c
+++ b/loader/loader.c
@@ -633,20 +633,47 @@ static void writeVNCPasswordFile(char *pfile, char *password) {
*/
static void readNetInfo(struct loaderData_s ** ld) {
struct loaderData_s * loaderData = *ld;
- char *cfgfile = NULL;
- gchar *contents = NULL;
+ char *cfgfile = NULL, *devfile = "/tmp/s390net";
+ gchar *contents = NULL, *device = NULL;
gchar **lines = NULL, **line = NULL;
GError *e = NULL;
- /* when this function is called, the DEVICE environment variable
+ /* when this function is called, /tmp/s390net
* contains the device name whose ifcfg file we want to read
*/
- if (!getenv("DEVICE")) {
+ if (!g_file_test(devfile, G_FILE_TEST_EXISTS)) {
+ logMessage(DEBUGLVL, "readNetInfo %s not found, early return", devfile);
+ return;
+ }
+ if (!g_file_get_contents(devfile, &contents, NULL, &e)) {
+ logMessage(ERROR, "error reading %s: %s", devfile, e->message);
+ g_error_free(e);
+ abort();
+ }
+ line = lines = g_strsplit(contents, "\n", 0);
+ g_free(contents);
+ while (*line != NULL) {
+ gchar *tmp = g_strdup(*line);
+ tmp = g_strstrip(tmp);
+ logMessage(DEBUGLVL, "readNetInfo stripped line: %s", tmp);
+ if (strlen(tmp) > 0) {
+ device = strdup(tmp);
+ g_free(tmp);
+ logMessage(DEBUGLVL, "readNetInfo found device: %s", device);
+ break;
+ }
+ g_free(tmp);
+ line++;
+ }
+ g_strfreev(lines);
+ if (strlen(device) == 0) {
return;
+ logMessage(DEBUGLVL, "readNetInfo no device found");
}
checked_asprintf(&cfgfile, "/etc/sysconfig/network-scripts/ifcfg-%s",
- getenv("DEVICE"));
+ device);
+ logMessage(INFO, "readNetInfo cfgfile: %s", cfgfile);
/* make sure everything is NULL before we begin copying info */
loaderData->ipv4 = NULL;
@@ -1495,7 +1522,7 @@ static char *doLoaderMain(struct loaderData_s *loaderData,
logMessage(INFO, "going to do getNetConfig");
- /* s390 provides all config info by way of the CMS conf file */
+ /* s390 provides all config info by way of linuxrc.s390 */
if (FL_HAVE_CMSCONF(flags)) {
loaderData->ipinfo_set = 1;
#ifdef ENABLE_IPV6
--
1.7.0.4
_______________________________________________
Anaconda-devel-list mailing list
Anaconda-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/anaconda-devel-list
