This patch fixes some old fallout from the move to NetworkManager.
Without this patch, loaderData never gets fully populated with the
network settings from linuxrc.s390. Some backstory:
Before the move to NM, linuxrc.s390 wrote out /tmp/netinfo and loader
read that file it to populate loaderData. By reading in these values,
loader would not have to prompt the user again for the same network
settings.
With the move to NM, this function was changed to read the only ifcfg
file in /etc/sysconfig/network-scripts and gather settings. We cannot
always assume one file in /etc/sysconfig/network-scripts, so this patch
addresses that problem and makes some other improvements.
1) Read /etc/sysconfig/network-scripts/ifcfg-DEVICE where DEVICE is the
value returned by getenv("DEVICE").
2) Remove old parsing code and use g_file_get_contents(), g_strsplit(),
and g_shell_unquote().
Tested on s390x, which is the only platform that would call this
function, and it successfully elmininates the double prompting of
network settings.
Related: rhbz#522064
---
loader/loader.c | 181 +++++++++++++++++++++----------------------------------
1 files changed, 69 insertions(+), 112 deletions(-)
diff --git a/loader/loader.c b/loader/loader.c
index ff78e35..c828b96 100644
--- a/loader/loader.c
+++ b/loader/loader.c
@@ -613,67 +613,25 @@ static void writeVNCPasswordFile(char *pfile, char *password) {
fclose(f);
}
-/* XXX: read information from /etc/sysconfig/network-scripts/ifcfg-$INTERFACE
+/* read information from /etc/sysconfig/network-scripts/ifcfg-$INTERFACE
* (written by linuxrc), the linuxrc mess should be firing up NM too
*/
static void readNetInfo(struct loaderData_s ** ld) {
- int i;
struct loaderData_s * loaderData = *ld;
- DIR *dp = NULL;
- FILE *f = NULL;
- struct dirent *ent = NULL;
char *cfgfile = NULL;
- int bufsiz = 100;
- char buf[bufsiz];
- char *vname = NULL;
- char *vparm = NULL;
-
- /* when this function is called, we can assume only one network device
- * config file has been written to /etc/sysconfig/network-scripts, so
- * find it and read it
- */
- dp = opendir("/etc/sysconfig/network-scripts");
- if (dp == NULL) {
- return;
- }
-
- while ((ent = readdir(dp)) != NULL) {
- if (!strncmp(ent->d_name, "ifcfg-", 6)) {
- checked_asprintf(&cfgfile, "/etc/sysconfig/network-scripts/%s",
- ent->d_name);
-
- break;
- }
- }
-
- if (dp != NULL) {
- if (closedir(dp) == -1) {
- logMessage(DEBUGLVL, "%s (%d): %m", __func__, __LINE__);
- abort();
- }
- }
-
- if (cfgfile == NULL) {
- logMessage(DEBUGLVL, "no ifcfg files found in /etc/sysconfig/network-scripts");
- return;
- }
-
+ gchar *contents = NULL;
+ gchar **lines = NULL, **line = NULL;
+ GError *e = NULL;
- if ((f = fopen(cfgfile, "r")) == NULL) {
- logMessage(DEBUGLVL, "%s (%d): %m", __func__, __LINE__);
- free(cfgfile);
+ /* when this function is called, the DEVICE environment variable
+ * contains the device name whose ifcfg file we want to read
+ */
+ if (!getenv("DEVICE")) {
return;
}
- if ((vname = (char *) malloc(sizeof(char) * 15)) == NULL) {
- logMessage(DEBUGLVL, "%s (%d): %m", __func__, __LINE__);
- abort();
- }
-
- if ((vparm = (char *) malloc(sizeof(char) * 85)) == NULL) {
- logMessage(DEBUGLVL, "%s (%d): %m", __func__, __LINE__);
- abort();
- }
+ checked_asprintf(&cfgfile, "/etc/sysconfig/network-scripts/ifcfg-%s",
+ getenv("DEVICE"));
/* make sure everything is NULL before we begin copying info */
loaderData->ipv4 = NULL;
@@ -694,45 +652,54 @@ static void readNetInfo(struct loaderData_s ** ld) {
#endif
/*
- * The /tmp/netinfo file is written out by /sbin/init on s390x (which is
+ * The ifcfg file is written out by /sbin/init on s390x (which is
* really the linuxrc.s390 script). It's a shell-sourcable file with
* various system settings needing for the system instance.
*
* The goal of this function is to read in only the network settings
* and populate the loaderData structure.
*/
- while(fgets(buf, bufsiz, f)) {
- /* trim whitespace from end */
- i = 0;
- while (!isspace(buf[i]) && i < (bufsiz-1))
- i++;
- buf[i] = '\0';
+ if (!g_file_get_contents(cfgfile, &contents, NULL, &e)) {
+ logMessage(ERROR, "error reading %s: %s", cfgfile, e->message);
+ g_error_free(e);
+ return;
+ }
- /* break up var name and value */
- if (strstr(buf, "=")) {
- vname = strtok(buf, "=");
- if (vname == NULL)
- continue;
+ line = lines = g_strsplit(contents, "\n", 0);
+ g_free(contents);
- vparm = strtok(NULL, "=");
- if (vparm == NULL)
- continue;
+ while (*line != NULL) {
+ gchar *tmp = g_strdup(*line);
+ gchar **pair = NULL;
- if (!strncmp(vname, "IPADDR", 6))
- loaderData->ipv4 = strdup(vparm);
+ if (!strstr(tmp, "=")) {
+ g_free(tmp);
+ continue;
+ }
- if (!strncmp(vname, "NETMASK", 7))
- loaderData->netmask = strdup(vparm);
+ tmp = g_strstrip(tmp);
+ pair = g_strsplit(tmp, "=", 0);
- if (!strncmp(vname, "GATEWAY", 7))
- loaderData->gateway = strdup(vparm);
+ if (g_strv_length(pair) == 2) {
+ gchar *val = g_shell_unquote(pair[1], &e);
- if (!strncmp(vname, "DNS", 3))
- loaderData->dns = strdup(vparm);
+ if (e != NULL) {
+ logMessage(WARNING, "error reading %s from %s: %s",
+ pair[0], cfgfile, e->message);
+ g_error_free(e);
+ }
- if (!strncmp(vname, "MTU", 3)) {
+ if (!g_strcmp0(pair[0], "IPADDR")) {
+ loaderData->ipv4 = strdup(val);
+ } else if (!g_strcmp0(pair[0], "NETMASK")) {
+ loaderData->netmask = strdup(val);
+ } else if (!g_strcmp0(pair[0], "GATEWAY")) {
+ loaderData->gateway = strdup(val);
+ } else if (!g_strcmp0(pair[0], "DNS")) {
+ loaderData->dns = strdup(val);
+ } else if (!g_strcmp0(pair[0], "MTU")) {
errno = 0;
- loaderData->mtu = strtol(vparm, NULL, 10);
+ loaderData->mtu = strtol(val, NULL, 10);
if ((errno == ERANGE && (loaderData->mtu == LONG_MIN ||
loaderData->mtu == LONG_MAX)) ||
@@ -740,50 +707,40 @@ static void readNetInfo(struct loaderData_s ** ld) {
logMessage(ERROR, "%s: %d: %m", __func__, __LINE__);
abort();
}
+ } else if (!g_strcmp0(pair[0], "PEERID")) {
+ loaderData->peerid = strdup(val);
+ } else if (!g_strcmp0(pair[0], "SUBCHANNELS")) {
+ loaderData->subchannels = strdup(val);
+ } else if (!g_strcmp0(pair[0], "PORTNAME")) {
+ loaderData->portname = strdup(val);
+ } else if (!g_strcmp0(pair[0], "NETTYPE")) {
+ loaderData->nettype = strdup(val);
+ } else if (!g_strcmp0(pair[0], "CTCPROT")) {
+ loaderData->ctcprot = strdup(val);
+ } else if (!g_strcmp0(pair[0], "LAYER2")) {
+ loaderData->layer2 = strdup(val);
+ } else if (!g_strcmp0(pair[0], "PORTNO")) {
+ loaderData->portno = strdup(val);
+ } else if (!g_strcmp0(pair[0], "MACADDR")) {
+ loaderData->macaddr = strdup(val);
+ } else if (!g_strcmp0(pair[0], "HOSTNAME")) {
+ loaderData->hostname = strdup(val);
}
- if (!strncmp(vname, "PEERID", 6))
- loaderData->peerid = strdup(vparm);
-
- if (!strncmp(vname, "SUBCHANNELS", 12))
- loaderData->subchannels = strdup(vparm);
-
- if (!strncmp(vname, "PORTNAME", 8))
- loaderData->portname = strdup(vparm);
-
- if (!strncmp(vname, "NETTYPE", 7))
- loaderData->nettype = strdup(vparm);
-
- if (!strncmp(vname, "CTCPROT", 7))
- loaderData->ctcprot = strdup(vparm);
-
- if (!strncmp(vname, "LAYER2", 6))
- loaderData->layer2 = strdup(vparm);
-
- if (!strncmp(vname, "PORTNO", 6))
- loaderData->portno = strdup(vparm);
-
- if (!strncmp(vname, "MACADDR", 7))
- loaderData->macaddr = strdup(vparm);
-
- if (!strncmp(vname, "HOSTNAME", 8))
- loaderData->hostname = strdup(vparm);
+ g_free(val);
}
+
+ g_strfreev(pair);
+ g_free(tmp);
+ line++;
}
if (loaderData->ipv4 && loaderData->netmask) {
flags |= LOADER_FLAGS_HAVE_CMSCONF;
}
- if (fclose(f) == -1) {
- logMessage(ERROR, "%s: %d: %m", __func__, __LINE__);
- abort();
- }
-
- if (cfgfile != NULL) {
- free(cfgfile);
- }
-
+ free(cfgfile);
+ g_strfreev(lines);
return;
}
--
1.6.6.1
_______________________________________________
Anaconda-devel-list mailing list
Anaconda-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/anaconda-devel-list
