David Cantrell wrote:
Jeroen van Meeuwen wrote:
David Cantrell wrote:
Jeroen van Meeuwen wrote:
Hi there,
here's a couple of patches that fix tab usage vs. the use of spaces
in some of the scripts that I needed to edit for the next patch.
Applied the patches to mk-images.efi and buildinstall, but the others
failed. I suppose I waited too long to apply them. Can you update
the two I missed and I'll get those in too?
Here you go, thanks ;-)
0003-Fix-indentation-in-upd-instroot.patch still fails. It's the giant
PACKAGES variable that's the failure.
The other patch applied.
And again since the last patch didn't come through very well, apparently.
Kind regards,
Jeroen van Meeuwen
-kanarip
>From 3f498ca189d15eabe25c2acb24c9cfc3416bff88 Mon Sep 17 00:00:00 2001
From: Jeroen van Meeuwen (Fedora Unity) <kanarip@xxxxxxxxxxxxxxx>
Date: Wed, 18 Feb 2009 01:58:04 +0100
Subject: [PATCH] Fix indentation on upd-instroot
---
scripts/upd-instroot | 236 +++++++++++++++++++++++++------------------------
1 files changed, 120 insertions(+), 116 deletions(-)
diff --git a/scripts/upd-instroot b/scripts/upd-instroot
index 982c16d..8a055d7 100755
--- a/scripts/upd-instroot
+++ b/scripts/upd-instroot
@@ -24,54 +24,54 @@ ARCH=`uname -m`
while [ $# -gt 0 ]; do
case $1 in
- --debug)
- DEBUG="--debug"
- shift
- ;;
-
- --arch)
- ARCH=$2
- shift; shift
- ;;
-
- --imgdir)
- DEST=$2
- shift; shift
- ;;
-
- # a filesystem tree to use as updates. could be the output
- # of 'make install' from anaconda...
- --updates)
- UPDATES=$2
- shift; shift
- ;;
-
- --nogr)
- echo "*** DeprecationWarning: ignoring --nogr option." >&2
- shift
- ;;
-
- --mindir)
- echo "*** DeprecationWarning: ignoring --mindir option." >&2
- shift; shift
- ;;
-
- --stg2dir)
- echo "*** DeprecationWarning: please use --imgdir instead of --stg2dir." >&2
- shift; shift
- ;;
-
- *)
- yumconf=$1
- shift
- ;;
+ --debug)
+ DEBUG="--debug"
+ shift
+ ;;
+
+ --arch)
+ ARCH=$2
+ shift; shift
+ ;;
+
+ --imgdir)
+ DEST=$2
+ shift; shift
+ ;;
+
+ # a filesystem tree to use as updates. could be the output
+ # of 'make install' from anaconda...
+ --updates)
+ UPDATES=$2
+ shift; shift
+ ;;
+
+ --nogr)
+ echo "*** DeprecationWarning: ignoring --nogr option." >&2
+ shift
+ ;;
+
+ --mindir)
+ echo "*** DeprecationWarning: ignoring --mindir option." >&2
+ shift; shift
+ ;;
+
+ --stg2dir)
+ echo "*** DeprecationWarning: please use --imgdir instead of --stg2dir." >&2
+ shift; shift
+ ;;
+
+ *)
+ yumconf=$1
+ shift
+ ;;
esac
done
if [ -z "$yumconf" ]; then
- echo "upd-instroot: updates instimage from a Red Hat RPMS directory"
- echo "usage: $0 [--debug] [--arch arch] [--imgdir imgdir] [yumconf]"
- exit 1
+ echo "upd-instroot: updates instimage from a Red Hat RPMS directory"
+ echo "usage: $0 [--debug] [--arch arch] [--imgdir imgdir] [yumconf]"
+ exit 1
fi
if [ $ARCH = x86_64 -o $ARCH = s390x -o $ARCH = ppc64 ]; then
@@ -99,45 +99,47 @@ expandPackageSet() {
KEEPFILES=$5
[ -d $PKGDEST ] || die "ERROR: directory missing: $PKGDEST"
- if [ -z "$DEBUG" ]; then outlvl="--quiet" ; else outlvl="--verbose"; fi
+
+ [ -z "$DEBUG" ] && outlvl="--quiet" || outlvl="--verbose"
+
yum $outlvl -c $YUMCONF -y --installroot=$YUMDIR install $RPMS 2>&1 || die "ERROR: could not install packages"
if [ -n "$UPDATES" ]; then
- (cd $UPDATES; find) | (cd $UPDATES ; /bin/cpio --quiet -pmdu $YUMDIR)
+ (cd $UPDATES; find) | (cd $UPDATES ; /bin/cpio --quiet -pmdu $YUMDIR)
fi
# figure out the theme to keep
if [ -f $YUMDIR/etc/gtk-2.0/gtkrc ]; then
- gtktheme=$(grep "gtk-theme-name" $YUMDIR/etc/gtk-2.0/gtkrc | awk {'print $3;'} | sed -e 's/"//g')
- echo "usr/share/themes/$gtktheme" >> $KEEPFILES
- # find gtk engine needed
- for engine in `grep engine $YUMDIR/usr/share/themes/$gtktheme/gtk-2.0/gtkrc | awk {'print $2;'} | sed -e 's/"//g' | sort -u` ; do
- echo "usr/$LIBDIR/gtk-2.0/*/engines/*$engine*" >> $KEEPFILES
- done
-
- theme=$(grep "gtk-icon-theme-name" $YUMDIR/etc/gtk-2.0/gtkrc | awk {'print $3;'} | sed -e 's/"//g')
- while [ -n "$theme" ]; do
- echo "usr/share/icons/$theme" >> $KEEPFILES
- theme=$(grep Inherits $YUMDIR/usr/share/icons/$theme/index.theme | cut -d = -f 2)
- done
+ gtktheme=$(grep "gtk-theme-name" $YUMDIR/etc/gtk-2.0/gtkrc | awk {'print $3;'} | sed -e 's/"//g')
+ echo "usr/share/themes/$gtktheme" >> $KEEPFILES
+ # find gtk engine needed
+ for engine in `grep engine $YUMDIR/usr/share/themes/$gtktheme/gtk-2.0/gtkrc | awk {'print $2;'} | sed -e 's/"//g' | sort -u` ; do
+ echo "usr/$LIBDIR/gtk-2.0/*/engines/*$engine*" >> $KEEPFILES
+ done
+
+ theme=$(grep "gtk-icon-theme-name" $YUMDIR/etc/gtk-2.0/gtkrc | awk {'print $3;'} | sed -e 's/"//g')
+ while [ -n "$theme" ]; do
+ echo "usr/share/icons/$theme" >> $KEEPFILES
+ theme=$(grep Inherits $YUMDIR/usr/share/icons/$theme/index.theme | cut -d = -f 2)
+ done
fi
echo `date` "Installing files"
pushd $YUMDIR >/dev/null
cat $KEEPFILES | while read spec ; do
- #Pull off path
- path=`echo "$spec" | sed 's,\([^[*\?]*\)/.*,\1,'`
- for filespec in `find ./$path -path "./$spec" 2> /dev/null` ; do
- if [ ! -e $filespec ]; then
- continue
- elif [ ! -d $filespec ]; then
- instFile $filespec $PKGDEST
- else
- for i in `find $filespec -type f 2> /dev/null` ; do instFile $i $PKGDEST ; done
- for i in `find $filespec -type l 2> /dev/null` ; do instFile $i $PKGDEST ; done
- for d in `find $filespec -type d 2> /dev/null` ; do instDir $d $PKGDEST ; done
- fi
- done
+ #Pull off path
+ path=`echo "$spec" | sed 's,\([^[*\?]*\)/.*,\1,'`
+ for filespec in `find ./$path -path "./$spec" 2> /dev/null` ; do
+ if [ ! -e $filespec ]; then
+ continue
+ elif [ ! -d $filespec ]; then
+ instFile $filespec $PKGDEST
+ else
+ for i in `find $filespec -type f 2> /dev/null` ; do instFile $i $PKGDEST ; done
+ for i in `find $filespec -type l 2> /dev/null` ; do instFile $i $PKGDEST ; done
+ for d in `find $filespec -type d 2> /dev/null` ; do instDir $d $PKGDEST ; done
+ fi
+ done
done
popd >/dev/null
}
@@ -149,45 +151,45 @@ die () {
}
PACKAGES="GConf2 NetworkManager ORBit2 PolicyKit VLGothic-fonts acl anaconda
- anaconda-yum-plugins at-spi atk attr audit-libs bash bitmap-fonts-cjk
- booty btrfs-progs busybox-anaconda bzip2 bzip2-libs cairo cjkunifonts-uming
- comps-extras coreutils cpio cracklib cracklib-dicts cracklib-python
- cryptsetup-luks db4 dbus dbus-python dejavu-sans-fonts
- dejavu-sans-mono-fonts device-mapper
- device-mapper-libs dhclient dhcpv6-client dmapi dmraid dmraid-libs
- dogtail dosfstools e2fsprogs e2fsprogs-libs echo-icon-theme
- elfutils-libelf expat firstboot fontconfig fonts-ISO8859-2 freetype gail
- gdk-pixbuf gfs2-utils glib2 glibc-common gnome-python2-canvas gnome-python2-gconf
- gnome-python2-gtkhtml2 gnome-themes gpm gtk2 gtk2-engines gtkhtml2 hal
- hdparm hwdata initscripts iproute iputils iscsi-initiator-utils
- jfsutils keyutils-libs krb5-libs libICE libSM libX11 libXau
- libXaw libXcursor libXdmcp libXevie libXext libXfixes libXfont libXft
- libXi libXinerama libXmu libXpm libXrandr libXrender libXt libXtst
- libXxf86misc libacl libart_lgpl libattr libbdevid libbdevid-python
- libbonobo libfontenc libgcc
- libglade2 libgnomecanvas libgcrypt libgpg-error libjpeg liblbxutil libnl
- libpixman libpng libselinux libselinux-python libsemanage
- libsemanage-python libsepol libstdc++ libtermcap libthai libuser
- libuser-python libvolume_id libxcb libxkbfile libxml2 lohit-fonts-bengali
- lohit-fonts-gujarati lohit-fonts-hindi lohit-fonts-kannada lohit-fonts-maithili
- lohit-fonts-oriya lohit-fonts-punjabi lohit-fonts-tamil lohit-fonts-telugu
- lvm2 madan-fonts mdadm
- mesa-dri-drivers mkinitrd module-init-tools nash ncurses neon net-tools
- newt newt-python nfs-utils nspr nss ntfs-3g pam pango parted pciutils pcre
- policy policycoreutils popt prelink procps pycairo pygobject2 pygtk2
- pygtk2-libglade pykickstart pyparted pyspi python python-bugzilla
- python-elementtree python-libs python-pyblock python-sqlite
- python-urlgrabber pyxf86config raidtools readline redhat-artwork
- reiserfs-utils rhpl rpm rpm-libs rpm-python sed selinux-policy-targeted
- setup slang smc-fonts-meera specspo sqlite synaptics system-config-date
- system-config-keyboard ${brandpkgname}-logos ${brandpkgname}-release taipeifonts tcp_wrappers
- tzdata udev un-core-fonts-dotum urw-fonts util-linux-ng tightvnc-server
- tightvnc-server-module
- wpa_supplicant xkeyboard-config xfsdump xfsprogs xorg-x11 xorg-x11-auth
- xorg-x11-base xorg-x11-drivers xorg-x11-font-utils xorg-x11-fonts-ethiopic
- xorg-x11-fonts-misc xorg-x11-libs xorg-x11-libs-data xorg-x11-server-utils
- xorg-x11-server-Xorg xorg-x11-xkb-utils xorg-x11-xkbdata xorg-x11-xfs yum
- yum-fedorakmod yum-metadata-parser zenity zlib /etc/gtk-2.0/gtkrc"
+ anaconda-yum-plugins at-spi atk attr audit-libs bash bitmap-fonts-cjk
+ booty btrfs-progs busybox-anaconda bzip2 bzip2-libs cairo cjkunifonts-uming
+ comps-extras coreutils cpio cracklib cracklib-dicts cracklib-python
+ cryptsetup-luks db4 dbus dbus-python dejavu-sans-fonts
+ dejavu-sans-mono-fonts device-mapper
+ device-mapper-libs dhclient dhcpv6-client dmapi dmraid dmraid-libs
+ dogtail dosfstools e2fsprogs e2fsprogs-libs echo-icon-theme
+ elfutils-libelf expat firstboot fontconfig fonts-ISO8859-2 freetype gail
+ gdk-pixbuf gfs2-utils glib2 glibc-common gnome-python2-canvas gnome-python2-gconf
+ gnome-python2-gtkhtml2 gnome-themes gpm gtk2 gtk2-engines gtkhtml2 hal
+ hdparm hwdata initscripts iproute iputils iscsi-initiator-utils
+ jfsutils keyutils-libs krb5-libs libICE libSM libX11 libXau
+ libXaw libXcursor libXdmcp libXevie libXext libXfixes libXfont libXft
+ libXi libXinerama libXmu libXpm libXrandr libXrender libXt libXtst
+ libXxf86misc libacl libart_lgpl libattr libbdevid libbdevid-python
+ libbonobo libfontenc libgcc
+ libglade2 libgnomecanvas libgcrypt libgpg-error libjpeg liblbxutil libnl
+ libpixman libpng libselinux libselinux-python libsemanage
+ libsemanage-python libsepol libstdc++ libtermcap libthai libuser
+ libuser-python libvolume_id libxcb libxkbfile libxml2 lohit-fonts-bengali
+ lohit-fonts-gujarati lohit-fonts-hindi lohit-fonts-kannada lohit-fonts-maithili
+ lohit-fonts-oriya lohit-fonts-punjabi lohit-fonts-tamil lohit-fonts-telugu
+ lvm2 madan-fonts mdadm
+ mesa-dri-drivers mkinitrd module-init-tools nash ncurses neon net-tools
+ newt newt-python nfs-utils nspr nss ntfs-3g pam pango parted pciutils pcre
+ policy policycoreutils popt prelink procps pycairo pygobject2 pygtk2
+ pygtk2-libglade pykickstart pyparted pyspi python python-bugzilla
+ python-elementtree python-libs python-pyblock python-sqlite
+ python-urlgrabber pyxf86config raidtools readline redhat-artwork
+ reiserfs-utils rhpl rpm rpm-libs rpm-python sed selinux-policy-targeted
+ setup slang smc-fonts-meera specspo sqlite synaptics system-config-date
+ system-config-keyboard ${brandpkgname}-logos ${brandpkgname}-release taipeifonts tcp_wrappers
+ tzdata udev un-core-fonts-dotum urw-fonts util-linux-ng tightvnc-server
+ tightvnc-server-module
+ wpa_supplicant xkeyboard-config xfsdump xfsprogs xorg-x11 xorg-x11-auth
+ xorg-x11-base xorg-x11-drivers xorg-x11-font-utils xorg-x11-fonts-ethiopic
+ xorg-x11-fonts-misc xorg-x11-libs xorg-x11-libs-data xorg-x11-server-utils
+ xorg-x11-server-Xorg xorg-x11-xkb-utils xorg-x11-xkbdata xorg-x11-xfs yum
+ yum-fedorakmod yum-metadata-parser zenity zlib /etc/gtk-2.0/gtkrc"
if [ $ARCH = i386 ]; then
PACKAGES="$PACKAGES glibc.i386 openssl.i386"
@@ -211,7 +213,7 @@ fi
if [ $ARCH = s390 -o $ARCH = s390x ]; then
PACKAGES="$PACKAGES s390utils binutils libgcc tcp_wrappers
sed net-tools openssh openssh-server coreutils
- login initscripts bash portmap pam
+ login initscripts bash portmap pam
login mount grep modutils gawk
strace xorg-x11-xauth xorg-x11-libs"
fi
@@ -698,7 +700,7 @@ EOF
# KEEPFILERESCUE is all files to keep from the packages in PACKAGESRESCUE
#
# This defines the files in addition to KEEPFILE that make up
-# the install images for NFS and CD/DVD based rescue mode installs. This
+# the install images for NFS and CD/DVD based rescue mode installs. This
# image is not loaded into memory so it can be considerably larger.
#
# NOTE: hd, ftp, and http rescue mode use and image based on KEEPFILE since
@@ -861,11 +863,12 @@ cat $DEST/usr/lib/anaconda/lang-table* | awk '
}
' | sed -e 's/latn/Latn/g' | LC_ALL=C sort -u > $DEST/locales
for p in lib share; do (
-cd $DEST/usr/$p/locale && {
-ls | grep -v locale.alias | grep -v locale-archive | LC_ALL=C sort > $DEST/locales.list
-LC_ALL=C comm -13 $DEST/locales $DEST/locales.list | xargs rm -rf
-}
+ cd $DEST/usr/$p/locale && {
+ ls | grep -v locale.alias | grep -v locale-archive | LC_ALL=C sort > $DEST/locales.list
+ LC_ALL=C comm -13 $DEST/locales $DEST/locales.list | xargs rm -rf
+ }
); done
+
rm -f $DEST/locales $DEST/locales.list
# fixup joe links
@@ -915,6 +918,7 @@ sed -i 's|\(installforallkernels\) = 0|\1 = 1|' $DEST/etc/yum/pluginconf.d/fedor
# they will be soft links to /mnt/sysimage.
#
echo "Fixing up /etc/man.config to point into /mnt/sysimage"
+
#
# Lets avoid the lines with MANPATH_MAP for now
#
--
1.6.0.6
_______________________________________________
Anaconda-devel-list mailing list
Anaconda-devel-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/anaconda-devel-list
