Hi folks, browsing through the kickstart page on the wiki I found that both the part and raid commands have the --encrypted options. What will happen when mixing them as in the example below: part raid.01 --size=60 --ondisk=sda part raid.02 --size=60 --ondisk=sdb --encrypted part raid.03 --size=60 --ondisk=sdc part raid.11 --size=1 --grow --ondisk=sda part raid.12 --size=1 --grow --ondisk=sdb --encrypted part raid.13 --size=1 --grow --ondisk=sdc raid / --level=1 --device=md0 raid.01 raid.02 raid.03 --encrypted raid /usr --level=5 --device=md1 raid.11 raid.12 raid.13 Possible answers: 1) Error: RAID array(md0 / md1) containing encrypted and non-encrypted partitions 2) Only raid.12 (say /dev/sdb2) will be encrypted but the RAID array will be not. This meaning that "raw" data on other disks is not encrypted. 3) / will be encrypted because its underlying RAID device(md0) will be encrypted. The encryption for raid.02 (say /dev/sdb1) will be ignored. Raw data on disks is encrypted with a single pass phrase. 4) / will be encrypted (see #3). Additionally raid.02 is also encrypted with another pass phrase. This is RAID 1 (mirroring) and raw data on discs will be different because it's encrypted with 2 passwords. Which ones of the above are true? Thanks, Alexander. _______________________________________________ Anaconda-devel-list mailing list Anaconda-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/anaconda-devel-list
