David Cantrell wrote:
Daniel F de Araujo wrote:
Hello list,
I have a couple of questions regarding the design of the network
gui/text screen. Before I ask, it maybe helpful to explain my setup
and situation:
I have a network adapter with two ports. The first port (eth0, static
IP) is connected to the public network and the other port (eth1, dhcp)
is connected to my private network (same subnet as the NFS
installation and DHCP servers). After I grab a dynamic IP for eth1
and setup the partitions, I end up in the network gui. Here, I enter
the static IP address of eth0. I cannot, however, edit the gateway or
DNS settings (which are different than eth1) for this port (eth0). So:
1) Is Anaconda designed to simply configure the adapter/port that
accesses the install data? I assume the responsibility would then
fall on the user to configure the other adapters during the firstboot
process or setup agent screen.
2) If #1 is true, then I am curious as to why Anaconda allows the user
to configure the IP, but the not the gateway/DNS information, for
other adapters since it relies on firstboot, etc.
Thanks in advance for the help/explanations.
Anaconda collects enough information to write out files in
/etc/sysconfig/network-scripts. We write out ifcfg-ethX files. The
gateway and DNS settings are not stored per-interface. The gateway is
written to /etc/sysconfig/network since you can only have one default
gateway. DNS settings are written to /etc/resolv.conf and are also
system-wide rather than per interface.
Flawed logic there. I have a laptop. Which network device should provide
the default route depends.... One is 11b wireless, sometimes I connect
to wire for increased speed. So does my boss.
It would be reasonable for which ever is more-recently activated to
prevail, and for removing wire to restore wireless (if it's still present).
Anaconda will allow you to configure each network interface in the
system. You can set it up for manual or dynamic configuration and flag
it as ONBOOT or not.
--
Cheers
John
-- spambait
1aaaaaaa@xxxxxxxxxxxxxxxx Z1aaaaaaa@xxxxxxxxxxxxxxxx
Please do not reply off-list
