Hi all, I'm trying to setup a Red Hat 6.2 install tree (don't ask why!) that includes all the errata etc. I've run into quite a few problems. Firstly, I can only apply updates built on a pre rpm4 system (rh62 is distributed with rpm3). I can add db3 and rpm4 to the install tree and that still works, but if I add any other rpms built after the change to rpm4, then it says the rpm is installed but there are no files from the rpm on the system. I'm guessing that it maybe a problem with anaconda being built against rpm3, I've rebuilt the anaconda rpm on my rh62 system with rpm4 installed but this didn't help. I've also tried to update the /sbin/loader+/sbin/init in the initrd.img on the bootnet.img floppy to be built against rpm4 libraries (I couldn't get the initrd.img down to a size small enough to go on the floppy!). Does anybody have an idea if I'm even looking in the right place to solve these problems? I'm installing using NFS and kickstart. --Paul This E-mail message, including any attachments, is intended only for the person or entity to which it is addressed, and may contain confidential information. If you are not the intended recipient, any review, retransmission, disclosure, copying, modification or other use of this E-mail message or attachments is strictly forbidden. If you have received this E-mail message in error, please contact the author and delete the message and any attachments from your computer. You are also advised that the views and opinions expressed in this E-mail message and any attachments are the author's own, and may not reflect the views and opinions of Digital Interactive Television Group.
