Hi everyone, I recentely bought a guitar effect that acts also as a USB soundcard (ins and outs), so I'm trying to configure it - named "Cuvave cube-baby" - on my Linux box. At first when i connect it i see the system going slower... then i realize that the system repetedly freezes. Here's the lsusb out: --- ~$ lsusb Bus 003 Device 002: ID 04f2:b044 Chicony Electronics Co., Ltd Acer CrystalEye Webcam Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 301a:5555 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub --- And here's the amixer log: --- amixer: Mixer load hw:1 error: Connection timed out Card hw:1 'Device'/'SmartlinkTechnology USB2.0 Device at usb-0000:00:1d.1-1, full speed' Mixer name : 'USB Mixer' Components : 'USB301a:5555' Controls : 7 amixer: Mixer hw:1 load error: Connection timed out --- The lspci output: -- ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) --- The dsmeg output: --- ~$ sudo dmesg -l err,crit [ 152.889527] usb 4-1: 2:1: cannot set freq 48000 to ep 0x82 --- There's no mention on linux on the producer site and their answer to my question on any sort of compatibility with linux was: "install the asio4all sound card driver"... they clearly could not understand the problem. Anything i could try to let it be recognised by alsa? _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user