Hi there,
my soundcard works only in 50% of the boots.
❯ hwinfo --sound
19: PCI a00.0: 0401 Multimedia audio controller
[Created at pci.386]
Unique ID: cuhJ.Rgto84+swI4
Parent ID: x1VA.RTygCxq_rO0
SysFS ID: /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/0000:0a:00.0
SysFS BusID: 0000:0a:00.0
Hardware Class: sound
Model: "Creative SB1550 Audigy 5/Rx"
Vendor: pci 0x1102 "Creative Labs"
Device: pci 0x0008 "CA0108/CA10300 [Sound Blaster Audigy Series]"
SubVendor: pci 0x1102 "Creative Labs"
SubDevice: pci 0x1024 "SB1550 Audigy 5/Rx"
I/O Ports: 0xd000-0xd03f (rw)
IRQ: 18 (no events)
Module Alias: "pci:v00001102d00000008sv00001102sd00001024bc04sc01i00"
Driver Info #0:
Driver Status: snd_emu10k1 is active
Driver Activation Cmd: "modprobe snd_emu10k1"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)
If the card is recognised well the card works out of the box, but in
half of all boots the card is not recognised. For some reasons the card
didn't get an interrupt and then the card is not available in
/proc/asound/cards
working state:
File: /proc/interrupts
───────┼───────────────────────────────────────────────────────────────
───────────────────────────────────────────────────────────────────────
────────────────────────────
1 │ CPU0 CPU1 CPU2 CPU3
2 │ 0: 8 0 0 0 IO-APIC 2-edge timer
3 │ 8: 0 0 0 1 IO-APIC 8-edge rtc0
4 │ 9: 0 0 0 0 IO-APIC 9-fasteoi acpi
5 │ 16: 0 0 4 0 IO-APIC 16-fasteoi i801_smbus
6 │ 18: 0 21 0 0 IO-APIC 18-fasteoi snd_emu10k1
In the not working state the cards get no interrupt, but the interrupt
above ( 18) in not given to another card or something
442368-edge aerdrv
journald meldet dann:
✦ ❯ journalctl -b -g snd_emu10k1
-- Logs begin at Mon 2020-06-29 17:38:04 CEST, end at Mon 2020-11-02
20:30:00 CET. --
Nov 02 18:03:14 sysiphus kernel: snd_emu10k1 0000:0a:00.0: enabling
device (0000 -> 0001)
Nov 02 18:03:14 sysiphus kernel: snd_emu10k1 0000:0a:00.0: Audigy2
value: Special config.
Nov 02 18:03:15 sysiphus kernel: snd_emu10k1 0000:0a:00.0: AC'97 0 does
not respond - RESET
Nov 02 18:03:15 sysiphus kernel: snd_emu10k1 0000:0a:00.0: AC'97 0
access is not valid [0x0], removing mixer.
Nov 02 18:03:15 sysiphus kernel: snd_emu10k1: probe of 0000:0a:00.0
failed with error -5
Debian Sid
✦ ❯ uname -a
Linux sysiphus 5.9.0-2-amd64 #1 SMP Debian 5.9.6-1 (2020-11-08) x86_64
GNU/Linux
Board is an Asus PRIME Z270-K with bios 1207.
I have tested the card in another pci port and also have changed the
card to a new one, both without success.
Can you please help me to debug this further? When you need additional
information, please ask and I will provide it.
Grüße/ regards Micha
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
