Hello everyone, I recently updated the firmware on my UltraLite mk4 (IF YOURS IS WORKING OK, DON'T UPGRADE or you'll repeat my mistake). Current firmware on my piece is 1.3.4+232, 07/27/18 17:46:22, BIOS is Aug-04-2017 b568a4c. After the update an issue appeared - a moment after initializing the device and playing normally, it starts sounding as if it was put through a bitcruncher effect. After a longer while the output loses gain only to disappear completely after some more seconds pass (the gain change is not smooth, it seems to go away in steps). What I have tried: * Switching internal clock to LTC on the interface - would hold the sync together for a little longer; I did NOT send the actual timecode because I had trouble finding something to generate it for me * Switching sample rates - No noticeable change in behavior * Testing with speaker-test - No change in behavior, looks like this has to happen on ALSA level or lower * Changing clock source in Cadence (a JACK helper) settings and reinitializing - No effect Possible clues I saw: * dmesg started showing this when I plug the device in: [ 533.419099] usb 1-2.3: new high-speed USB device number 8 using xhci_hcd [ 533.527638] usb 1-2.3: New USB device found, idVendor=07fd, idProduct=0005, bcdDevice= 2.00 [ 533.527646] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 533.527650] usb 1-2.3: Product: UltraLite-mk4 [ 533.527654] usb 1-2.3: Manufacturer: MOTU [ 533.527658] usb 1-2.3: SerialNumber: 0001f2fffe008e19 [ 534.377873] usb 1-2.3: clock source 1 is not valid, cannot use <and about 50 more lines of the clock source message> Questions: * What other places can I go to to report this? * What other settings can I tweak? Thanks, Stanislaw |
_______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
