On Sun, 13 Sep 2015, Anders Genell wrote:
Actually, I believe disconnecting anything should be unnecessary?
If speaker-test -Dhw:PCH -c 6 -s 1 already works, adding infinite loop option should
suffice?
speaker-test -Dhw:PCH -c 6 -s 1 -l 0
All I did was read the man page. It says that if you use -s it only plays
once. No matter what -l says. Ie the man page says that -l only works for two
channel. Butr maybe the man page is wrong? I do not know.
Regards,
Anders
13 sep 2015 kl. 04:05 skrev Bill Unruh <unruh@xxxxxxxxxxxxxx>:
man speaker-test ?
if -s is used the program will always only produce a single shot.
SO use -l 0 (loop indefinitely)
and unplug one of the speakers
On Sat, 12 Sep 2015, Alan Bromborsky wrote:
I am using alsa speaker-test to set my channel gain levels
with a spl
meter and alsamixer one channel at a time. If I run the
follow command
line -
speaker-test -Dhw:PCH -c 6 -s 1
everything works fine and I hear pink noise from the front
left speaker,
but the tone doesn't last long enough to set the channel gain
using my
spl meter. Is there anyway to make the duration of the tone
(pink
noise) longer. Fifteen seconds would be sufficient.
------------------------------------------------------------------------------
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
------------------------------------------------------------------------------
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
------------------------------------------------------------------------------
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
