Re: Unbalanced stereo input as balanced mono input

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



He stated that if he ran the signal left and right with the ground as common
ground, he got lots of noise. 
If he subtracted L from R the noise disappeared. 
Now, that may mean that there is common mode noise, in which case running the
balanced into an unbalanced would be very noisy, or the noise was all in the
ground wire, in which case bal->unbal might work.
But there is another issue. He does not say if the mic is a battery operated
unit or a mains operated. If the latter, then the battle between the grounds
of his mic and his computer will produce lots of noise. If battery, then it
might work.

Certainly I would agree that use of a better sound card would be advisable. 
Note that he does not say what "measurements" he wants to do. If it is just
levels then the crappy sound card might do, but even freq response is liable
to be dominated by his the response of his sound card. And noise is almost
certainly dominated by the sound card.


William G. Unruh   |  Canadian Institute for|     Tel: +1(604)822-3273
Physics&Astronomy  |     Advanced Research  |     Fax: +1(604)822-5324
UBC, Vancouver,BC  |   Program in Cosmology |     unruh@xxxxxxxxxxxxxx
Canada V6T 1Z1     |      and Gravity       |  www.theory.physics.ubc.ca/

On Mon, 24 Aug 2015, Ralf Mardorf wrote:

> On Sun, 23 Aug 2015 14:20:46 -0700, Robert M. Riches Jr. wrote:
>> That solution is to just ground one of the balanced wires and use the
>> other as signal.
>
> This (an unbalanced wiring) is the only sane solution for this kind of
> setup.
>
> Faked balanced input or real balanced input by using a transformer or
> what ever kind of cheap circuit won't help.
>
> After that it's possible to connect this mono signal to the left and
> right input, no de-coupling and no conversion is needed, but I anyway
> wouldn't do it. IMO the OP should record the unbalanced signal by the
> left or right channel only and split it to two mono signals by
> software, e.g. by jackd connections, assumed it should be needed.
>
> However, one issue still remains. Line input is not optimised for
> microphone output. Btw. I guess integrated consumer audio provides some
> kind of microphone input. It might be crappy, but likely better than
> any kind of connection to crappy line inputs.
>
> A cheap microphone pre-amp with line output might help when using mobo
> integrated audio too.
>
> For what purpose ever a measurement microphone might be good for, I
> doubt that usage with an on-board audio device makes much sense.
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>

------------------------------------------------------------------------------
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user



[Index of Archives]     [ALSA Devel]     [Linux Audio Users]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]

  Powered by Linux