Hello Clemens,
I tried the new quirk, but no success. The lsusb -v gives the same
output as before.
When I use alsamixer, I have no controls. At least the card is mentioned
in /proc/asound.
Which steps should be next to bring the card to life?
Best regards,
Ewald
On 26/07/12 20:37, Clemens Ladisch wrote:
> Ewald Reisenberger wrote:
>> the Roland UA-55 is not recognized by Alsa. Is there a way to use this card?
>>
>> I tried so far the quirk below, but did not succeded.
> The interface numbers were off. Try this:
>
> {
> USB_DEVICE(0x0582, 0x012f),
> .driver_info = (unsigned long)& (const struct snd_usb_audio_quirk) {
> /* .vendor_name = "Roland", */
> /* .product_name = "UA-55", */
> .ifnum = QUIRK_ANY_INTERFACE,
> .type = QUIRK_COMPOSITE,
> .data = (const struct snd_usb_audio_quirk[]) {
> {
> .ifnum = 0,
> .type = QUIRK_AUDIO_STANDARD_INTERFACE
> },
> {
> .ifnum = 1,
> .type = QUIRK_AUDIO_STANDARD_INTERFACE
> },
> {
> .ifnum = 2,
> .type = QUIRK_MIDI_FIXED_ENDPOINT,
> .data =& (const struct snd_usb_midi_endpoint_info) {
> .out_cables = 0x0001,
> .in_cables = 0x0001
> }
> },
> {
> .ifnum = -1
> }
> }
> }
> },
>
>
> Regards,
> Clemens
>
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
