Dear Clemens,
thanks for Your answer.
I tried it with
sudo rmmod firewire-ohci
and
modprobe firewire-ohci quirks=81
unfortunately, the last command caused an immediate total crash.
I also can't start the linux partition, when my edirol module is
plugged in, maybee it has to do with it, or maybee with my
blacklist-firewire-file?
2012/1/26 Clemens Ladisch <cladisch@xxxxxxxxxxxxxx>:
> (CC to the FFADO list)
>
> Stefan Thomas wrote:
>> Dear community,
>> I hope this is the right adress for my question, because it's not so much about alsa but about jack and firewire.
>> I'm using Ubuntu Oneiric and I have a firewire soundcard, the edirol fa-66.
>> I have installed jackd1, which includes the ffado-drivers for firewire modules.
>> Off course I have clicked the "enable raw1394 access" in the ubuntu studio controls.
>> When I start qjackctl with the firewire drivers, it stops immediately.
>> I can read in the message window of qjack:
>>
>> cannot load driver module firewire
>>
>> When I type
>>
>> ls -al /dev/raw1394
>>
>> and sudo chmod 777 /dev/raw1394
>> I get
>>
>> ls: Zugriff auf /dev/raw1394 nicht möglich: Datei oder Verzeichnis nicht gefunden
>>
>> (in english: can't get acess do /dev/raw139, file or folder not found)
>>
>> Somewhere I have read the one should do:
>>
>> sudo ln -s /dev/fw0 /dev/raw1394
>
> No, this is definitely _not_ what one should do.
> FFADO will access /dev/fw* directly anyway.
>
>> After that I get for ls -al /dev/raw1394
>>
>> lrwxrwxrwx 1 root root 8 2012-01-25 08:46 /dev/raw1394 -> /dev/fw0
>>
>> But I have still the same problem!
>> Jack "says" always
>>
>> loading driver ..
>>
>> SSE2 detected
>>
>> libffado 2.999.0- built Oct 10 2011 08:11:23
>>
>> firewire ERR: Error creating FFADO streaming device
>>
>> cannot load driver module firewire
>>
>> But a few months ago everything worked excellent!
>> Does somenone have an idea, which could be the first step in solving my problem?
>> The output of ffado-diag says
>>
>>
>>
>> FFADO diagnostic utility 2.999.0-
>> ============================
>> (C) 2008 Pieter Palmers
>> 2009-2010 Arnold Krille
>>
>>
>> === CHECK ===
>> Base system...
>> kernel version............ 3.0.0-15-generic
>> old 1394 stack present.... False
>> old 1394 stack loaded..... False
>> old 1394 stack active..... False
>> new 1394 stack present.... True
>> new 1394 stack loaded..... True
>> new 1394 stack active..... True
>> /dev/raw1394 node present. False
>> Prerequisites (dynamic at run-time)...
>> gcc ............... gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
>> g++ ............... sh: g++: not found
>> PyQt4 (by pyuic4) . sh: pyuic4: not found
>> jackd ............. jackd version 0.121.0 tmpdir /dev/shm protocol 24
>> path ............ /usr/bin/jackd
>> flags ........... Package jack was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `jack.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'jack' found
>> libraw1394 ........ 2.0.7
>> flags ........... -lraw1394
>> libavc1394 ........ Package libavc1394 was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `libavc1394.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'libavc1394' found
>> flags ........... Package libavc1394 was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `libavc1394.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'libavc1394' found
>> libiec61883 ....... Package libiec61883 was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `libiec61883.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'libiec61883' found
>> flags ........... Package libiec61883 was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `libiec61883.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'libiec61883' found
>> libxml++-2.6 ...... Package libxml++-2.6 was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `libxml++-2.6.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'libxml++-2.6' found
>> flags ........... Package libxml++-2.6 was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `libxml++-2.6.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'libxml++-2.6' found
>> dbus-1 ............ Package dbus-1 was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `dbus-1.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'dbus-1' found
>> flags ........... Package dbus-1 was not found in the
>> pkg-config search path.
>> Perhaps you should add the directory containing `dbus-1.pc'
>> to the PKG_CONFIG_PATH environment variable
>> No package 'dbus-1' found
>> Prerequisites (static at compile-time)...
>> gcc ............... gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
>> g++ ............... g++ (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
>> PyQt4 (by pyuic4) . Python User Interface Compiler 4.8.5 for Qt version 4.7.3
>> jackd ............. sh: jackd: not found
>> path ............
>> flags ........... Package jack was not found in the pkg-config search path.
>> libraw1394 ........ 2.0.7
>> flags ........... -lraw1394
>> libavc1394 ........ Package libavc1394 was not found in the pkg-config search path.
>> flags ........... Package libavc1394 was not found in the pkg-config search path.
>> libiec61883 ....... 1.2.0
>> flags ........... -liec61883 -lraw1394
>> libxml++-2.6 ...... 2.34.1
>> flags ........... -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -pthread -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lgthread-2.0 -lrt -lglib-2.0
>> dbus-1 ............ 1.4.14
>> flags ........... -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1 -lpthread -lrt
>> Hardware...
>> Host controllers:
>> 03:00.3 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller [1180:e832] (prog-if 10 [OHCI])
>> Subsystem: Sony Corporation Device [104d:907a]
>> Control: ... DisINTx+
>> Interrupt: pin D routed to IRQ 55
>
> Oooh, another PCI Express controller that claims to have MSI support ...
>
>> ...
>> Hardware Interrupts:
>> --------------------
>> IRQ 55: PID: None, count: [1, 1, 1, 1, 1, 1, 1, 1], Sched None (priority None), drivers: ['firewire_ohci']
>
> ... but doesn't fire it more than once.
>
> Stefan, please try (as root):
> rmmod firewire-ohci
> modprobe firewire-ohci quirks=81
>
>> FireWire kernel drivers:
>>
>> The new FireWire kernel stack is loaded.
>> This is still kind of experimental. If you encounter problems, please also check
>> with the old stack.
>
>
> Regards,
> Clemens
------------------------------------------------------------------------------
Keep Your Developer Skills Current with LearnDevNow!
The most comprehensive online learning library for Microsoft developers
is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
Metro Style Apps, more. Free future releases when you subscribe now!
http://p.sf.net/sfu/learndevnow-d2d
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
