Problem recording from an RME Hammerfall DSP 9632

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



At least that's what I think I have.  lspci says:

00:08.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 97)

Playback works just fine, and analogue input works as well.  With
hdspmixer I'm able to route the analogue input to the SPDIF outputs,
and I'm able to control the volume of the playback via amixer:

[larsi@rocket-sam /tmp]$ amixer cset numid=5 16,8,32768
numid=5,iface=HWDEP,name='Mixer'
  ; type=INTEGER,access=rw------,values=3,min=0,max=65536,step=1
  : values=0,0,0
$ amixer cset numid=5 17,9,32768

(etc)

So playback and routing from inputs to outputs works as expected.

However, I'm not able to record anything.

$ arecord -t raw -r 44100 -c 2 -f S16_LE | od
Recording raw data 'stdin' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
0000000 000000 000000 000000 000000 000000 000000 000000 000000
*

So I'm getting output from the capture device -- but it's all zeroes.

I've tried using amixer to route everything to everything else, but that
doesn't have any effect for arecord, either.

What am I missing?

-- 
(domestic pets only, the antidote for overdose, milk.)
  larsi@xxxxxxxx * Lars Magne Ingebrigtsen


------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user

[Index of Archives]     [ALSA Devel]     [Linux Audio Users]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]

  Powered by Linux