Hi You need to use index option when loading the modules, with usb devices you also have to specify the id of the device. Here are examples from my modules.conf file # Usb-headset options snd-usb-audio index=2 vid=0x046d,0x0a02 # M-audio fasttrack options snd-usb-audio index=3 vid=0x0763,0x2012 You can get the vid values with lsusb command. For M-audio the values are Bus 002 Device 005: ID 0763:2012 Midiman Note that in the modules.conf both hex values (0763 and 2012) are prefixed with '0x'. HTH -- mr. M01510 & guide Loadstone-GPS On Wed, 14 Jan 2009, sonofzev@xxxxxxxxxxxx wrote: > Hi, > > I have multiple USB devices and one PCI device and would like to ensure > the order > of the devices is set. > > I understand this is possible but requires some of the hardware detail. > > Does someone have an example they can send through? > > Regards > > Allan > > > > > ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
