Mark A Jenks wrote:
> I have a Bluegears b-Enspirer 7.1 Sound Card CMI8788 that I am looking
> for some help/advice for.
>
> I would like to seperate out the stereo outs to multiple outputs, so I
> can use it as a backend for my house with zones.
The hardware cannot control the four analog outputs independently, but
it's possible to use plugins for ALSA-aware applications.
Put the following into your ~/.asoundrc or /etc/asound.conf:
pcm_slave eightchannels {
pcm "hw:0,0" # or "hw:1,0" for the second card
channels 8
}
pcm.stereo1 {
type plug
slave.pcm {
type dshare
slave eightchannels
}
bindings [ 0 1 ]
}
pcm.stereo2 {
type plug
slave.pcm { type dshare slave eightchannels }
bindings [ 2 3 ]
}
pcm.stereo3 {
type plug
slave.pcm { type dshare slave eightchannels }
bindings [ 4 5 ]
}
pcm.stereo4 {
type plug
slave.pcm { type dshare slave eightchannels }
bindings [ 6 7 ]
}
then use device names "stereo1" to "stereo4" instead of "default" or
"hw:x".
> I also would like to leave the Digital out as an 7.1 to work with my
> stereo for Watching movies.
The SPDIF output is independent; it mirrors the front analog output only
when the "spdif" device is not being used.
HTH
Clemens
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
