Hi all ,
I have been having issues in getting Osprey 440 to work on a FC7
installed machine
Video is good but Audio capture results in high pitched noise only
with little very low audio
may find the logs below .. Has anyone worked on these cards and got
it running ???
Card : OSPREY 440
OS: FC 7
Kernel : Uname = 2.6.21-1.3194.fc7
Video Devices got recognised by default with the following
=============
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:09:04.0, irq: 22, latency: 64, mmio:
0xc4f00000
bttv0: detected: Osprey-440 [card=140], PCI subsystem ID is 0070:ff07
bttv0: using: Osprey 440 [card=140,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00feffff [init]
bttv0: osprey eeprom: card=140 'Osprey 440' serial=7190177
bttv0: tuner absent
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bttv: Bt8xx card found (1).
bttv1: Bt878 (rev 17) at 0000:09:05.0, irq: 23, latency: 64, mmio:
0xc4f02000
bttv1: detected: Osprey-440 [card=140], PCI subsystem ID is 0070:ff07
bttv1: using: Osprey 440 [card=140,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00feffff [init]
bttv1: osprey eeprom: card=140 'Osprey 440' serial=7190177
bttv1: tuner absent
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 . ok
bttv: Bt8xx card found (2).
bttv2: Bt878 (rev 17) at 0000:09:06.0, irq: 24, latency: 64, mmio:
0xc4f04000
bttv2: detected: Osprey-440 [card=140], PCI subsystem ID is 0070:ff07
bttv2: using: Osprey 440 [card=140,autodetected]
bttv2: gpio: en=00000000, out=00000000 in=00feffff [init]
bttv2: osprey eeprom: card=140 'Osprey 440' serial=7190177
bttv2: tuner absent
bttv2: registered device video2
bttv2: registered device vbi2
bttv2: PLL: 28636363 => 35468950 . ok
bttv: Bt8xx card found (3).
bttv3: Bt878 (rev 17) at 0000:09:07.0, irq: 25, latency: 64, mmio:
0xc4f06000
bttv3: detected: Osprey-440 [card=140], PCI subsystem ID is 0070:ff07
bttv3: using: Osprey 440 [card=140,autodetected]
bttv3: gpio: en=00000000, out=00000000 in=00feffff [init]
bttv3: osprey eeprom: card=140 'Osprey 440' serial=7190177
bttv3: tuner absent
bttv3: registered device video3
bttv3: registered device vbi3
bttv3: PLL: 28636363 => 35468950 . ok
===============
Downloaded the osprey-bbbedbfb2be0.tar.gz from
(http://linuxtv.org/hg/~tap/osprey/archive/tip.tar.gz)
untared it and did make all and make install
Did make menuconfig in Kernel Source build Directory to verify ALSA is
enable for bt878x ..
Rebooted the machine audio was not recognised ...
modprobe -r snd-bt87x; modprobe snd-bt87x load_all=1
unknown card 0x878-0x70:0xff07, using default rate 32000
please mail id, board name, and, if it works, the correct digital_rate
option to <alsa-devel@xxxxxxxxxxxx>
ACPI: PCI Interrupt 0000:09:04.1[A] -> GSI 24 (level, low) -> IRQ 22
unknown card 0x878-0x70:0xff07, using default rate 32000
please mail id, board name, and, if it works, the correct digital_rate
option to <alsa-devel@xxxxxxxxxxxx>
ACPI: PCI Interrupt 0000:09:05.1[A] -> GSI 25 (level, low) -> IRQ 23
unknown card 0x878-0x70:0xff07, using default rate 32000
please mail id, board name, and, if it works, the correct digital_rate
option to <alsa-devel@xxxxxxxxxxxx>
ACPI: PCI Interrupt 0000:09:06.1[A] -> GSI 26 (level, low) -> IRQ 24
unknown card 0x878-0x70:0xff07, using default rate 32000
please mail id, board name, and, if it works, the correct digital_rate
option to <alsa-devel@xxxxxxxxxxxx>
ACPI: PCI Interrupt 0000:09:07.1[A] -> GSI 27 (level, low) -> IRQ 25
*cat /proc/asound/oss/sndstat*
Sound Driver:3.8.1a-980706 (ALSA v1.0.14rc3 emulation code)
Kernel: Linux vss161.tss.com 2.6.21-1.3194.fc7 #1 SMP Wed May 23
22:35:01 EDT 2007 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
Brooktree Bt878 at 0xc4f01000, irq 22
Brooktree Bt878 at 0xc4f03000, irq 23
Brooktree Bt878 at 0xc4f05000, irq 24
Brooktree Bt878 at 0xc4f07000, irq 25
Audio devices:
1: Bt87x Digital
2: Bt87x Digital
3: Bt87x Digital
4: Bt87x Digital
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
31: system timer
Mixers:
1: Bt87x
2: Bt87x
3: Bt87x
4: Bt87x
*# cat /proc/asound/pcm*
01-01: Bt87x Analog : Bt87x Analog : capture 1
01-00: Bt87x Digital : Bt87x Digital : capture 1
02-01: Bt87x Analog : Bt87x Analog : capture 1
02-00: Bt87x Digital : Bt87x Digital : capture 1
03-01: Bt87x Analog : Bt87x Analog : capture 1
03-00: Bt87x Digital : Bt87x Digital : capture 1
04-01: Bt87x Analog : Bt87x Analog : capture 1
04-00: Bt87x Digital : Bt87x Digital : capture 1
*# cat /proc/asound/devices*
2: : timer
3: : sequencer
4: [ 1- 1]: digital audio capture
5: [ 1- 0]: digital audio capture
6: [ 1] : control
7: [ 2- 1]: digital audio capture
8: [ 2- 0]: digital audio capture
9: [ 2] : control
10: [ 3- 1]: digital audio capture
11: [ 3- 0]: digital audio capture
12: [ 3] : control
13: [ 4- 1]: digital audio capture
14: [ 4- 0]: digital audio capture
15: [ 4] : control
*# cat /proc/asound/modules*
1 snd_bt87x
2 snd_bt87x
3 snd_bt87x
4 snd_bt87x
*# cat /proc/asound/cards*
1 [Bt878 ]: Bt87x - Brooktree Bt878
Brooktree Bt878 at 0xc4f01000, irq 22
2 [Bt878_1 ]: Bt87x - Brooktree Bt878
Brooktree Bt878 at 0xc4f03000, irq 23
3 [Bt878_2 ]: Bt87x - Brooktree Bt878
Brooktree Bt878 at 0xc4f05000, irq 24
4 [Bt878_3 ]: Bt87x - Brooktree Bt878
Brooktree Bt878 at 0xc4f07000, irq 25
Trying to grab video and audio by VLC ... video has no issues but Audio
is totally distorted and with full disturbances
Thanks and Regards
Norbert
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
