Alexander Saydakov wrote: > I am trying to hook up a MIDI keyboard. Here is my configuration: > > Asus P4P800-E motherboard with on-board sound and MIDI/game port. > MIDI port is configured 0x330 irq 5 in BIOS setup > ... > $ aseqdump -l > Port Client name Port name > ... > 20:0 MPU-401 UART MPU-401 UART MIDI > > $ aseqdump -p 20:0 > Cannot connect from port 20:0 - Input/output error > > # tail /var/log/messages > ...mpu401_uart.c:263: cmd: 0x3f failed at 0x330 (status = 0x80, data = 0x90) This indicates that the driver was not able to switch the device into UART mode. It's possible that there was some data on the MIDI port that prevented the driver from reading the port's status message; please try running aseqdump after rebooting, before pressing any key on the MIDI keyboard. HTH Clemens ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
