Hi,
I have an onboard sound card that I know for a fact is full duplex. Alsa
picks up the card fine, and everythign works except for full duplex
itself. All the info I was able to find is pre-dmix era, and looks very
dated. What steps do I have to take to enable full duplex? The relevant
information is included below, the kernel is vanilla 2.6.18.6, no patches.
Thanks in advance
Peter
==============================
lspci output:
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb
AC'97 Audio Controller (rev a1)
==============================
root@Thesaurus:~# cat /proc/asound/cards
0 [CK8S ]: NFORCE - NVidia CK8S
NVidia CK8S with ALC850 at 0xfe02b000, irq 19
1 [Live ]: EMU10K1 - SB Live 5.1
SB Live 5.1 (rev.7, serial:0x80641102) at 0x8400,
irq 21
root@Thesaurus:~#
==============================
root@Thesaurus:~# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22
13:55:50 2006 UTC).
root@Thesaurus:~#
==============================
root@Thesaurus:~# cat /proc/asound/pcm
00-02: Intel ICH - IEC958 : NVidia CK8S - IEC958 : playback 1
00-01: Intel ICH - MIC ADC : NVidia CK8S - MIC ADC : capture 1
00-00: Intel ICH : NVidia CK8S : playback 1 : capture 1
01-03: emu10k1 : Multichannel Playback : playback 1
01-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 :
capture 1
01-01: emu10k1 mic : Mic Capture : capture 1
01-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1
root@Thesaurus:~#
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
