> On 29 Feb 2020, at 05:45, Mark Reynolds <mreynolds@xxxxxxxxxx> wrote:
>
>
> On 2/28/20 1:15 PM, Alberto Viana wrote:
>> Mark,
>>
>> Yes, it solves the problem!!!!!!!!. Can you explain what exactly that config does? It's suppose to be on?
>> Found some old CVE about it and just want to be sure about what I'm doing.
> Well we used to keep this set to "on" but changed the default to "off", because when it's "on" it writes the clear text password in the replication changelog and retro changelog (if enabled). It was considered a security risk to do this by default. The problem here was that it is not documented anywhere that you need to turn it back "on" for winsync to send DS passwords to AD.
>
> We missed this, and I will make sure it gets documented right away in the Admin guide.
You're a wizard Mark.
>
> Regards,
>
> Mark
>
>>
>> Thanks
>>
>> Alberto Viana
>>
>>
>> On Fri, Feb 28, 2020 at 12:39 PM Mark Reynolds <mreynolds@xxxxxxxxxx> wrote:
>> Alberto,
>>
>> We might know what's going on. Can you sent nsslapd-unhashed-pw-switch to "on" in cn=config and see if it solves the problem?
>>
>> Thanks,
>>
>> Mark
>>
>> On 2/19/20 8:01 AM, Alberto Viana wrote:
>>> WIlliam,
>>>
>>> Would be helpful if I provide to you guys a test environment? It's not hard for me to do that.
>>>
>>> I'm really interesting in find out what is going on and some other projects over here are depending on my 389 upgrade.
>>>
>>> Thanks
>>>
>>> Alberto Viana
>>>
>>> On Mon, Feb 17, 2020 at 7:21 PM William Brown <wbrown@xxxxxxx> wrote:
>>> Mark, any ideas what to look at next :S
>>>
>>> Besides actually trying to setup and reproduce it which I think would be the next step ....
>>>
>>> > On 18 Feb 2020, at 05:45, Alberto Viana <albertocrj@xxxxxxxxx> wrote:
>>> >
>>> > Hi Guys,
>>> >
>>> > Setup another environment 389 1.4.1.14 + windows 2016, still not working, exactly the same behavior.
>>> >
>>> > :/
>>> >
>>> > Cheers,
>>> >
>>> > Alberto Viana
>>> >
>>> > On Wed, Jan 29, 2020 at 8:19 PM Alberto Viana <albertocrj@xxxxxxxxx> wrote:
>>> > William,
>>> >
>>> > Yes, *other* attributes are replicated to AD normally (in all versions that I tested).
>>> >
>>> > Thanks.
>>> >
>>> >
>>> >
>>> >
>>> > On Wed, Jan 29, 2020 at 8:16 PM William Brown <wbrown@xxxxxxx> wrote:
>>> >
>>> >
>>> > > On 30 Jan 2020, at 08:04, Alberto Viana <albertocrj@xxxxxxxxx> wrote:
>>> > >
>>> > > Mark
>>> > >
>>> > > Again (my bad on copy and paste):
>>> > >
>>> > > dn: cn=AD-DF-DC01,cn=replica,cn=dc\3Dmy\2Cdc\3Ddomain,cn=mapping tree,cn=config
>>> > > objectClass: top
>>> > > objectClass: nsDSWindowsReplicationAgreement
>>> > > cn: AD-DF-DC01
>>> > > nsDS5ReplicaRoot: dc=my,dc=domain
>>> > > description: AD-DF-DC01
>>> > > nsDS5ReplicaHost: gti-df-dc01.domain.local
>>> > > nsDS5ReplicaPort: 636
>>> > > nsDS5ReplicaTransportInfo: LDAPS
>>> > > nsDS5ReplicaBindDN: CN=Conta de sincronizacao do AD com LDAP 389,OU=APLICACOES,dc=my,dc=domain
>>> > > nsds7WindowsReplicaSubtree: dc=my,dc=domain
>>> > > nsds7DirectoryReplicaSubtree: dc=my,dc=domain
>>> > > nsds7WindowsDomain: RNP
>>> > > nsds7NewWinUserSyncEnabled: on
>>> > > nsds7NewWinGroupSyncEnabled: on
>>> > > nsDS5ReplicaCredentials: {AES-RERBNEJDUTBPV1psTXpoak15MDNPRFZrTXpZMg0KTnkxaE56VXhZMkUwWlMxbE5UazJNemhrWkFBQ
>>> > > RERBNEJDUTBPV1psTXpoak15MDNPRFZrTXpZMg0KTnkxaE56VXhZMkUwWlMxbE5UazJNemhrWkFBQ
>>> > > 0FRSUNBU0F3Q2dZSUtvWklodmNOQWdjd0hRWUpZSVpJQVdVRA0KQkFFcUJCQTJRME5QSmRXNWVLQW
>>> > > NFaXczVmFXWQ==}F/Jp/zDrXdzGs4/tMIPZZw==
>>> > > internalCreatorsName: cn=directory manager
>>> > > internalModifiersName: cn=directory manager
>>> > > creatorsName: cn=directory manager
>>> > > modifiersName: cn=directory manager
>>> > > createTimestamp: 20200129214430Z
>>> > > modifyTimestamp: 20200129214431Z
>>> > > nsds5BeginReplicaRefresh: start
>>> > >
>>> > >
>>> > > How are you changing the password in DS?
>>> > > Tried 3 different ways:
>>> > > 1. ldapmodify
>>> > > 2. password Selfservice (application that we have here)
>>> > > 3. Apache directory (LDAP client)
>>> >
>>> > I can't remember if I asked this, but do *other* non-password attributes replicate correctly from 389 to AD?
>>> >
>>> > >
>>> > > Question, the The AD machine (gti-df-dc01.my.domain) is the Domain Controller, right?
>>> > > The entry looks off, but it might be because you did some find/replace on some text. See comments below...
>>> > >
>>> > > Yes, this is my domain controller(AD). I have 6 domain controllers (2012 R2) over here, tried at least in 4.
>>> > >
>>> > > Another info is that I reconfigured my old server(1.3.7.4) and everything works as expect.
>>> > >
>>> > > So far, I have no idea where the problem is, so I decided that tomorrow I will bring up again my old server, (and after that, rebuild my lab environment e try to figure it out).
>>> > >
>>> > > Right now, I'm testing with 3 different versions:
>>> > > 1.4.1.14
>>> > > 1.4.3.2
>>> > > 1.4.2.5 => This one with Fedora packages (not compiled by myself)
>>> > >
>>> > > None of them is working with same behavior, just the password is not sent from 389 to AD. In all versions, attributes are replicated(except password) from 389 to AD, and everything is working fine from AD to 389.
>>> > >
>>> > > Please let me know if need some more info.
>>> > >
>>> > > Thanks
>>> > >
>>> > > Alberto Viana
>>> > >
>>> > > On Wed, Jan 29, 2020 at 5:24 PM Mark Reynolds <mreynolds@xxxxxxxxxx> wrote:
>>> > > How are you changing the password in DS?
>>> > >
>>> > > Question, the The AD machine (gti-df-dc01.my.domain) is the Domain Controller, right?
>>> > >
>>> > > The entry looks off, but it might be because you did some find/replace on some text. See comments below...
>>> > >
>>> > > On 1/29/20 1:26 PM, Alberto Viana wrote:
>>> > >> Mark,
>>> > >>
>>> > >> here's:
>>> > >>
>>> > >> dn: cn=AD-DF-DC01,cn=replica,cn=dc\3Drnp\2Cdc\3Dlocal,cn=mapping tree,cn=config
>>> > >> objectClass: top
>>> > >> objectClass: nsDSowsReplicationAgreement
>>> > >> cn: AD-DF-DC01
>>> > >> nsDS5ReplicaRoot: dc=rnp,dc=local
>>> > >> description: AD-DF-DC01
>>> > >> nsDS5ReplicaHost: gti-df-dc01.my.domain
>>> > >> nsDS5ReplicaPort: 636
>>> > >> nsDS5ReplicaTransportInfo: LDAPS
>>> > >> nsDS5ReplicaBindDN: CN=my user on AD,OU=APLICACOES,DC=my,DC=domain
>>> > >> nsds7owsReplicaSubtree: dc=my,dc=domain
>>> > > This is the wrong attribute, it should be: nsds7WindowsReplicaSubtree
>>> > >> nsds7DirectoryReplicaSubtree: dc=my,dc=domain
>>> > >> nsds7owsDomain: RNP
>>> > > Same here, it should be: nsds7WindowsDomain.
>>> > >
>>> > > Mark
>>> > >
>>> > >> nsds7NewWinUserSyncEnabled: on
>>> > >> nsds7NewWinGroupSyncEnabled: on
>>> > >> nsDS5ReplicaCredentials: {AES-E56VXhZMkUwWlMxbE5UazJNemhrWkFBQ
>>> > >> 0FRSUNBU0F3Q2dZSUtvWklodmNOQWdjd0hRWUpZSVpJQVdVRA0KQkFFcUJCRFl0ZGNTUGZoV2xEZE
>>> > >> 5rMUZNZWp4Rw==}UxxEid4L9eUthSplmxIoy4woEEB4YoihY1++Vv60ibM=
>>> > >> internalCreatorsName: cn=directory manager
>>> > >> internalModifiersName: cn=directory manager
>>> > >>
>>> > >> Thanks
>>> > >>
>>> > >> On Wed, Jan 29, 2020 at 2:27 PM Mark Reynolds <mreynolds@xxxxxxxxxx> wrote:
>>> > >>
>>> > >>
>>> > >> On 1/29/20 12:17 PM, Alberto Viana wrote:
>>> > >>> Mark,
>>> > >>>
>>> > >>> Already did that twice hehehehe
>>> > >>>
>>> > >>> Do you think that's about config once all attributes except password are sync'ed to AD? If it's about config, the log does not suppose to show something?
>>> > >>>
>>> > >>> 389 -> AD (all attributes except password)
>>> > >>> AD -> 389 (everthing works, including password)
>>> > >>>
>>> > >>> Tried almost everything over here, without success.
>>> > >>>
>>> > >>> There's another way to trace it? replication log does not shows me anything related to it.
>>> > >> Replication logging is the only option on the DS side.
>>> > >>
>>> > >> Can you share your replication agreement from dse.ldif? From what I saw from the command line you set everything correctly, but maybe it didn't write it correctly to the entry. You have to use LDAPS for passwords to sync to AD, and you specified that, but lets confirm what is actually in the agreement.
>>> > >>
>>> > >> Thanks,
>>> > >>
>>> > >> Mark
>>> > >>
>>> > >>>
>>> > >>> Thanks
>>> > >>>
>>> > >>> On Wed, Jan 29, 2020 at 12:35 PM Mark Reynolds <mreynolds@xxxxxxxxxx> wrote:
>>> > >>> Alberto,
>>> > >>>
>>> > >>> Sorry I'm not sure what is wrong. Please review the documentation and make sure you have everything setup correctly:
>>> > >>>
>>> > >>> https://access.redhat.com/documentation/en-us/red_hat_directory_server/10/html/administration_guide/managing_the_password_policy-synchronizing_passwords
>>> > >>>
>>> > >>> HTH,
>>> > >>>
>>> > >>> Mark
>>> > >>>
>>> > >>> On 1/29/20 10:22 AM, Alberto Viana wrote:
>>> > >>>> Hi Guys,
>>> > >>>>
>>> > >>>> My messages to list are being moderated (no sure why), trying again
>>> > >>>>
>>> > >>>> William,
>>> > >>>>
>>> > >>>> Right, so if you change a password on AD, does it properly change the password to 389?
>>> > >>>>
>>> > >>>> Yes.
>>> > >>>>
>>> > >>>> And are you using a "ldapmodify userpassword" or "ldappasswd" to change the password? What's the exact command you run against 389 to change the password?
>>> > >>>>
>>> > >>>> Tried 3 different ways:
>>> > >>>> 1. ldapmodify
>>> > >>>> 2. An application that we have here (password selfservice)
>>> > >>>> 3. Apache directory studio
>>> > >>>>
>>> > >>>> The password is always updated locally in 389 but never sent to AD.
>>> > >>>>
>>> > >>>> And it's seems that not even trying, I'm tracking on event viewer. Another thing that when I used to change the password, the passync always intercepts the change and tries to send back the (same) password and it's not happening.
>>> > >>>>
>>> > >>>> Please let me know if you anything else.
>>> > >>>>
>>> > >>>>
>>> > >>>>
>>> > >>>> On Tue, Jan 28, 2020 at 9:40 PM Alberto Viana <albertocrj@xxxxxxxxx> wrote:
>>> > >>>> William,
>>> > >>>>
>>> > >>>> Right, so if you change a password on AD, does it properly change the password to 389?
>>> > >>>>
>>> > >>>> Yes.
>>> > >>>>
>>> > >>>> And are you using a "ldapmodify userpassword" or "ldappasswd" to change the password? What's the exact command you run against 389 to change the password?
>>> > >>>>
>>> > >>>> Tried 3 different ways:
>>> > >>>> 1. ldapmodify
>>> > >>>> 2. An application that we have here (password selfservice)
>>> > >>>> 3. Apache directory studio
>>> > >>>>
>>> > >>>> The password is always updated locally in 389 but never sent to AD.
>>> > >>>>
>>> > >>>> And it's seems that not even trying, I'm tracking on event viewer. Another thing that when I used to change the password, the passync always intercepts the change and tries to send back the (same) password and it's not happening.
>>> > >>>>
>>> > >>>> Please let me know if you anything else.
>>> > >>>>
>>> > >>>> Thanks
>>> > >>>>
>>> > >>>>
>>> > >>>>
>>> > >>>> On Tue, Jan 28, 2020 at 9:31 PM William Brown <wbrown@xxxxxxx> wrote:
>>> > >>>>
>>> > >>>>
>>> > >>>> > On 29 Jan 2020, at 10:15, Alberto Viana <albertocrj@xxxxxxxxx> wrote:
>>> > >>>> >
>>> > >>>> > William,
>>> > >>>> >
>>> > >>>> > Sorry, my bad, it's not working
>>> > >>>> >
>>> > >>>> >
>>> > >>>> > The problem is the password is never sent to AD and it's just about password, any other replicated attribute that I modify sends the modification to AD normally.
>>> > >>>>
>>> > >>>>
>>> > >>>> Right, so if you change a password on AD, does it properly change the password to 389?
>>> > >>>>
>>> > >>>> And are you using a "ldapmodify userpassword" or "ldappasswd" to change the password? What's the exact command you run against 389 to change the password?
>>> > >>>>
>>> > >>>> >
>>> > >>>> > When you say "I think that perhaps we need to exclude objectClass=* from notes=U."
>>> > >>>>
>>> > >>>> No, this is something for the team and I to do, not you :)
>>> > >>>>
>>> > >>>> >
>>> > >>>> > Where should I do that? Do you need further information?
>>> > >>>> >
>>> > >>>> >
>>> > >>>> > Thanks
>>> > >>>> >
>>> > >>>> > Alberto Viana
>>> > >>>> >
>>> > >>>> >
>>> > >>>> > On Tue, Jan 28, 2020 at 9:09 PM William Brown <wbrown@xxxxxxx> wrote:
>>> > >>>> >
>>> > >>>> >
>>> > >>>> > > On 29 Jan 2020, at 10:01, Alberto Viana <albertocrj@xxxxxxxxx> wrote:
>>> > >>>> > >
>>> > >>>> > > WIlliam,
>>> > >>>> > >
>>> > >>>> > > Thanks, I put in my company's roadmap to think about pay for support,
>>> > >>>> >
>>> > >>>> > Great!
>>> > >>>> >
>>> > >>>> > > I found the problem, it's about aci (the user manager replication permission)
>>> > >>>> >
>>> > >>>> > Can you please describe the problem and solution more? That way I and others can learn from what you just solved :) It will help many others. Thank you!
>>> > >>>> >
>>> > >>>> > >
>>> > >>>> > > After add permission to read the userpassword field, starts to works.
>>> > >>>> > >
>>> > >>>> > > Again, Thanks!!!
>>> > >>>> > >
>>> > >>>> > >
>>> > >>>> > >
>>> > >>>> > > On Tue, Jan 28, 2020 at 8:58 PM William Brown <wbrown@xxxxxxx> wrote:
>>> > >>>> > >
>>> > >>>> > >
>>> > >>>> > > > On 29 Jan 2020, at 09:24, Alberto Viana <albertocrj@xxxxxxxxx> wrote:
>>> > >>>> > > >
>>> > >>>> > > > Hey Guys,
>>> > >>>> > > >
>>> > >>>> > > > Really lost here, don't know what else look or test, it's not working at all :/
>>> > >>>> > >
>>> > >>>> > > Hey there,
>>> > >>>> > >
>>> > >>>> > > Remember, the team is distributed around the world - I'm Australian for example, so sometimes mailing list questions can take 24 hours. Sometimes personal things go wrong. It's just the annoying nature, that we will potentially take time to respond :(
>>> > >>>> > >
>>> > >>>> > > If you do want an SLA, and it's super important to have things fixed, do consider convincing your business to take a SUSE (SLE) or Red Hat (RHDS) contract, as there are support teams that can assist, and there are going to be better response times rather than just us developers :)
>>> > >>>> > >
>>> > >>>> > > >
>>> > >>>> > > > Any help is appreciated
>>> > >>>> > > >
>>> > >>>> > > > Thanks
>>> > >>>> > > >
>>> > >>>> > > > On Tue, Jan 28, 2020 at 3:48 PM Alberto Viana <albertocrj@xxxxxxxxx> wrote:
>>> > >>>> > > > Hi Guys,
>>> > >>>> > > > 389-Directory/1.4.3.2
>>> > >>>> > > >
>>> > >>>> > > >
>>> > >>>> > > > The password sync from 389 to windows(2012) is not working:
>>> > >>>> > >
>>> > >>>> > > One of these days I really need to setup winsync at home to really learn more about it ...
>>> > >>>> > >
>>> > >>>> > > >
>>> > >>>> > > > # dsconf RNP repl-winsync-agmt create --suffix=dc=rnp,dc=local --host=gti-df-dc01 --port=636 --conn-protocol=LDAPS --bind-dn="CN=my_win_account" --bind-passwd=password --win-subtree=dc=my,dc=domain --ds-subtree=dc=my,dc=domain --win-domain=RNP --sync-users=on --sync-groups=on --init AD-DF-DC01
>>> > >>>> > > >
>>> > >>>> > > >
>>> > >>>> > > > Double checked everything including the user permissions on windows AD side , also checked the windows log and passync log, could not found anything related (at least the 389 trying to update my user's password or any error)
>>> > >>>> > > >
>>> > >>>> > > > From windows to 389 works fine.
>>> > >>>> > > >
>>> > >>>> > > > Attaching the log (in replication debug mode)
>>> > >>>> > >
>>> > >>>> > > Looking at the log I can see changes happening.
>>> > >>>> > >
>>> > >>>> > >
>>> > >>>> > > This error seems surprising, but shouldn't really cause a problem.
>>> > >>>> > >
>>> > >>>> > > [28/Jan/2020:15:14:05.423481115 -0300] - ERR - log_result - Internal unindexed search: source (cn=Multimaster Replication Plugin,cn=plugins,cn=config) search base="dc=my,dc=domain" filter="(&(|(objectclass=*)(objectclass=ldapsubentry))(nsUniqueid=0c57800e-050011e8-b998ed08-97c36f4f))" etime=0.000798288 nentries=1 notes=U details="Partially Unindexed Filter
>>> > >>>> > >
>>> > >>>> > > I think that perhaps we need to exclude objectClass=* from notes=U.
>>> > >>>> > >
>>> > >>>> > >
>>> > >>>> > > Anyway, you say it's "not working". I'm going to ask you to describe what "not working means". Did you change a group on AD and the changes aren't appearing in 389? Or the other way? Can you be more specific about what's not working?
>>> > >>>> > >
>>> > >>>> > > Thanks,
>>> > >>>> > >
>>> > >>>> > > >
>>> > >>>> > > > Don't know what else to look
>>> > >>>> > > >
>>> > >>>> > > > Thanks.
>>> > >>>> > > >
>>> > >>>> > > >
>>> > >>>> > > >
>>> > >>>> > > > _______________________________________________
>>> > >>>> > > > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > > > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > > > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > >>>> > > > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > >>>> > > > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > >
>>> > >>>> > > —
>>> > >>>> > > Sincerely,
>>> > >>>> > >
>>> > >>>> > > William Brown
>>> > >>>> > >
>>> > >>>> > > Senior Software Engineer, 389 Directory Server
>>> > >>>> > > SUSE Labs
>>> > >>>> > > _______________________________________________
>>> > >>>> > > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > >>>> > > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > >>>> > > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > > _______________________________________________
>>> > >>>> > > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > >>>> > > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > >>>> > > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> >
>>> > >>>> > —
>>> > >>>> > Sincerely,
>>> > >>>> >
>>> > >>>> > William Brown
>>> > >>>> >
>>> > >>>> > Senior Software Engineer, 389 Directory Server
>>> > >>>> > SUSE Labs
>>> > >>>> > _______________________________________________
>>> > >>>> > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > >>>> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > >>>> > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > _______________________________________________
>>> > >>>> > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > >>>> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > >>>> > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>>
>>> > >>>> —
>>> > >>>> Sincerely,
>>> > >>>>
>>> > >>>> William Brown
>>> > >>>>
>>> > >>>> Senior Software Engineer, 389 Directory Server
>>> > >>>> SUSE Labs
>>> > >>>> _______________________________________________
>>> > >>>> 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > >>>> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > >>>> List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>>
>>> > >>>>
>>> > >>>> _______________________________________________
>>> > >>>> 389-users mailing list --
>>> > >>>> 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>>
>>> > >>>> To unsubscribe send an email to
>>> > >>>> 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>>>
>>> > >>>> Fedora Code of Conduct:
>>> > >>>> https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > >>>>
>>> > >>>> List Guidelines:
>>> > >>>> https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > >>>>
>>> > >>>> List Archives:
>>> > >>>> https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>> --
>>> > >>>
>>> > >>> 389 Directory Server Development Team
>>> > >>>
>>> > >> --
>>> > >>
>>> > >> 389 Directory Server Development Team
>>> > >>
>>> > >>
>>> > >>
>>> > >> _______________________________________________
>>> > >> 389-users mailing list --
>>> > >> 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>
>>> > >> To unsubscribe send an email to
>>> > >> 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > >>
>>> > >> Fedora Code of Conduct:
>>> > >> https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > >>
>>> > >> List Guidelines:
>>> > >> https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > >>
>>> > >> List Archives:
>>> > >> https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > > --
>>> > >
>>> > > 389 Directory Server Development Team
>>> > >
>>> > > _______________________________________________
>>> > > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> >
>>> > —
>>> > Sincerely,
>>> >
>>> > William Brown
>>> >
>>> > Senior Software Engineer, 389 Directory Server
>>> > SUSE Labs
>>> > _______________________________________________
>>> > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > _______________________________________________
>>> > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>>
>>> —
>>> Sincerely,
>>>
>>> William Brown
>>>
>>> Senior Software Engineer, 389 Directory Server
>>> SUSE Labs
>>> _______________________________________________
>>> 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>> To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>>
>>>
>>> _______________________________________________
>>> 389-users mailing list --
>>> 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>>>
>>> To unsubscribe send an email to
>>> 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
>>>
>>> Fedora Code of Conduct:
>>> https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>>
>>> List Guidelines:
>>> https://fedoraproject.org/wiki/Mailing_list_guidelines
>>>
>>> List Archives:
>>> https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>> --
>>
>> 389 Directory Server Development Team
>>
> --
>
> 389 Directory Server Development Team
>
> _______________________________________________
> 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
—
Sincerely,
William Brown
Senior Software Engineer, 389 Directory Server
SUSE Labs
_______________________________________________
389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
