Probably worth sanity checking:
yum whatprovides '/etc/dirsrv/config/certmap.conf' to see why that's missing - that directory *should* exist and comes from the rpm I believe.
%config(noreplace)%{_sysconfdir}/%{pkgname}/config/certmap.conf
That's the rpm spec line from the RH 389-ds-base pkg, so I wonder if something went wrong in your pkg install or similar?
This may be in "backup if needed and remove the instance and try again" territory. IE remove-ds.pl. It's probably wise to also yum reinstall 389-ds-base and check /etc/dirsrv to ensure config was created.
> On 21 Aug 2019, at 10:13, Chase Miller <chasejmiller@xxxxxxxxx> wrote:
>
> pwd
> /etc/dirsrv
> [root@xxxxxx dirsrv]# ls -l
> total 0
> drwxrwx--- 3 dirsrv dirsrv 61 Aug 19 13:41 slapd-xxxxxxx
>
> On Tue, Aug 20, 2019 at 6:58 PM William Brown <wbrown@xxxxxxx> wrote:
>
>
> > On 20 Aug 2019, at 23:27, Chase Miller <chasejmiller@xxxxxxxxx> wrote:
> >
> > ss -tlnp
> > State Recv-Q Send-Q Local Address:Port Peer Address:Port
> > LISTEN 0 100 127.0.0.1:25 *:* users:(("master",pid=1439,fd=13))
> > LISTEN 0 128 *:22 *:* users:(("sshd",pid=1233,fd=3))
> > LISTEN 0 100 ::1:25 :::* users:(("master",pid=1439,fd=14))
> > LISTEN 0 128 :::22 :::* users:(("sshd",pid=1233,fd=4))
>
> Okay, so it's not running, that's why you can't contact it.
>
> >
> >
> > cat /var/log/dirsrv/slapd-xxxxxx/errors
> > 389-Directory/1.3.8.4 B2019.210.1719
> > xxxx.xxxx.xxxxx:389 (/etc/dirsrv/slapd-xxxxxxx)
> >
> > [19/Aug/2019:08:50:24.723398253 -0500] - INFO - ldbm_instance_config_cachememsize_set - force a minimal value 512000
> > [19/Aug/2019:08:50:24.733855781 -0500] - INFO - dblayer_instance_start - Import is running with nsslapd-db-private-import-mem on; No other process is allowed to access the database
> > [19/Aug/2019:08:50:24.735184817 -0500] - INFO - check_and_set_import_cache - pagesize: 4096, available bytes 7757774848, process usage 18108416
> > [19/Aug/2019:08:50:24.736206673 -0500] - INFO - check_and_set_import_cache - Import allocates 3030380KB import cache.
> > [19/Aug/2019:08:50:24.832157963 -0500] - INFO - import_main_offline - import userRoot: Beginning import job...
> > [19/Aug/2019:08:50:24.833239307 -0500] - INFO - import_main_offline - import userRoot: Index buffering enabled with bucket size 100
> > [19/Aug/2019:08:50:25.034047159 -0500] - INFO - import_producer - import userRoot: Processing file "/tmp/ldifE5J2Ye.ldif"
> > [19/Aug/2019:08:50:25.035917337 -0500] - INFO - import_producer - import userRoot: Finished scanning file "/tmp/ldifE5J2Ye.ldif" (9 entries)
> > [19/Aug/2019:08:50:25.536444284 -0500] - INFO - import_monitor_threads - import userRoot: Workers finished; cleaning up...
> > [19/Aug/2019:08:50:25.737885613 -0500] - INFO - import_monitor_threads - import userRoot: Workers cleaned up.
> > [19/Aug/2019:08:50:25.739150864 -0500] - INFO - import_main_offline - import userRoot: Cleaning up producer thread...
> > [19/Aug/2019:08:50:25.744587334 -0500] - INFO - import_main_offline - import userRoot: Indexing complete. Post-processing...
> > [19/Aug/2019:08:50:25.745613563 -0500] - INFO - import_main_offline - import userRoot: Generating numsubordinates (this may take several minutes to complete)...
> > [19/Aug/2019:08:50:25.749532490 -0500] - INFO - import_main_offline - import userRoot: Generating numSubordinates complete.
> > [19/Aug/2019:08:50:25.751110348 -0500] - INFO - ldbm_get_nonleaf_ids - import userRoot: Gathering ancestorid non-leaf IDs...
> > [19/Aug/2019:08:50:25.752032364 -0500] - INFO - ldbm_get_nonleaf_ids - import userRoot: Finished gathering ancestorid non-leaf IDs.
> > [19/Aug/2019:08:50:25.754209592 -0500] - INFO - ldbm_ancestorid_new_idl_create_index - import userRoot: Creating ancestorid index (new idl)...
> > [19/Aug/2019:08:50:25.755417599 -0500] - INFO - ldbm_ancestorid_new_idl_create_index - import userRoot: Created ancestorid index (new idl).
> > [19/Aug/2019:08:50:25.760432780 -0500] - INFO - import_main_offline - import userRoot: Flushing caches...
> > [19/Aug/2019:08:50:25.763124185 -0500] - INFO - import_main_offline - import userRoot: Closing files...
> > [19/Aug/2019:08:50:25.788462261 -0500] - INFO - dblayer_pre_close - All database threads now stopped
> > [19/Aug/2019:08:50:25.790360743 -0500] - INFO - import_main_offline - import userRoot: Import complete. Processed 9 entries in 1 seconds. (9.00 entries/sec)
> > [19/Aug/2019:08:50:26.025795802 -0500] - INFO - main - 389-Directory/1.3.8.4 B2019.210.1719 starting up
> > [19/Aug/2019:08:50:30.371320559 -0500] - INFO - ldbm_instance_config_cachememsize_set - force a minimal value 512000
> > [19/Aug/2019:08:50:30.380827675 -0500] - NOTICE - ldbm_back_start - found 8009548k physical memory
> > [19/Aug/2019:08:50:30.382186259 -0500] - NOTICE - ldbm_back_start - found 7572380k available
> > [19/Aug/2019:08:50:30.383287757 -0500] - NOTICE - ldbm_back_start - cache autosizing: db cache: 200238k
> > [19/Aug/2019:08:50:30.384495330 -0500] - NOTICE - ldbm_back_start - cache autosizing: userRoot entry cache (1 total): 589824k
> > [19/Aug/2019:08:50:30.390978513 -0500] - NOTICE - ldbm_back_start - cache autosizing: userRoot dn cache (1 total): 65536k
> > [19/Aug/2019:08:50:30.392881893 -0500] - NOTICE - ldbm_back_start - total cache size: 784792534 B;
> > [19/Aug/2019:08:50:30.394820717 -0500] - INFO - dblayer_start - Resizing db cache size: 3103109939 -> 164035542
> > [19/Aug/2019:08:50:30.556808235 -0500] - INFO - slapd_daemon - slapd started. Listening on All Interfaces port 389 for LDAP requests
> > [19/Aug/2019:08:53:05.491308203 -0500] - INFO - op_thread_cleanup - slapd shutting down - signaling operation threads - op stack size 0 max work q size 0 max work q stack size 0
> > [19/Aug/2019:08:53:05.500474342 -0500] - INFO - slapd_daemon - slapd shutting down - closing down internal subsystems and plugins
> > [19/Aug/2019:08:53:05.508437708 -0500] - INFO - dblayer_pre_close - Waiting for 4 database threads to stop
> > [19/Aug/2019:08:53:05.632310190 -0500] - INFO - dblayer_pre_close - All database threads now stopped
> > [19/Aug/2019:08:53:05.642993541 -0500] - INFO - ldbm_back_instance_set_destructor - Set of instances destroyed
> > [19/Aug/2019:08:53:05.644388927 -0500] - INFO - connection_post_shutdown_cleanup - slapd shutting down - freed 0 work q stack objects - freed 0 op stack objects
> > [19/Aug/2019:08:53:05.645425720 -0500] - INFO - main - slapd stopped.
> > [19/Aug/2019:09:15:43.069475986 -0500] - INFO - main - 389-Directory/1.3.8.4 B2019.210.1719 starting up
> > [19/Aug/2019:09:15:47.502679129 -0500] - INFO - ldbm_instance_config_cachememsize_set - force a minimal value 512000
> > [19/Aug/2019:09:15:47.514913346 -0500] - NOTICE - ldbm_back_start - found 8009548k physical memory
> > [19/Aug/2019:09:15:47.515913264 -0500] - NOTICE - ldbm_back_start - found 7619740k available
> > [19/Aug/2019:09:15:47.521731363 -0500] - NOTICE - ldbm_back_start - cache autosizing: db cache: 200238k
> > [19/Aug/2019:09:15:47.531738396 -0500] - NOTICE - ldbm_back_start - cache autosizing: userRoot entry cache (1 total): 589824k
> > [19/Aug/2019:09:15:47.537277994 -0500] - NOTICE - ldbm_back_start - cache autosizing: userRoot dn cache (1 total): 65536k
> > [19/Aug/2019:09:15:47.541163537 -0500] - NOTICE - ldbm_back_start - total cache size: 835124182 B;
> > [19/Aug/2019:09:15:47.687939227 -0500] - INFO - slapd_daemon - slapd started. Listening on All Interfaces port 389 for LDAP requests
> > [19/Aug/2019:13:37:30.365982188 -0500] - INFO - op_thread_cleanup - slapd shutting down - signaling operation threads - op stack size 0 max work q size 0 max work q stack size 0
> > [19/Aug/2019:13:37:30.367924032 -0500] - INFO - slapd_daemon - slapd shutting down - waiting for 16 threads to terminate
> > [19/Aug/2019:13:37:30.378443550 -0500] - INFO - slapd_daemon - slapd shutting down - closing down internal subsystems and plugins
> > [19/Aug/2019:13:37:30.384076053 -0500] - INFO - dblayer_pre_close - Waiting for 4 database threads to stop
> > [19/Aug/2019:13:37:30.683501119 -0500] - INFO - dblayer_pre_close - All database threads now stopped
> > [19/Aug/2019:13:37:30.693095235 -0500] - INFO - ldbm_back_instance_set_destructor - Set of instances destroyed
> > [19/Aug/2019:13:37:30.694587104 -0500] - INFO - connection_post_shutdown_cleanup - slapd shutting down - freed 0 work q stack objects - freed 0 op stack objects
> > [19/Aug/2019:13:37:30.695541469 -0500] - INFO - main - slapd stopped.
> > [19/Aug/2019:13:39:14.956052401 -0500] - INFO - ldbm_instance_config_cachememsize_set - force a minimal value 512000
> > [19/Aug/2019:13:39:14.969061719 -0500] - INFO - check_and_set_import_cache - pagesize: 4096, available bytes 7602278400, process usage 40792064
> > [19/Aug/2019:13:39:14.970107682 -0500] - INFO - check_and_set_import_cache - Import allocates 2969640KB import cache.
> > [19/Aug/2019:13:39:14.971216396 -0500] - INFO - ldbm_back_upgradednformat - userRoot: Start upgrade dn format.
> > [19/Aug/2019:13:39:14.972355840 -0500] - INFO - ldbm_back_upgradednformat - Instance userRoot in /var/lib/dirsrv/slapd-xxxxx/db/userRoot is up-to-date
> >
> >
> >
> > the setup file has this fatal error on setup
> > [19/08/19:13:41:28] - [Setup] Info Are you ready to set up your servers?
> > [19/08/19:13:41:30] - [Setup] Info yes
> > [19/08/19:13:41:30] - [Setup] Info Creating directory server . . .
> > [19/08/19:13:41:30] - [Setup] Info Could not copy file '/etc/dirsrv/config/certmap.conf' to '/etc/dirsrv/slapd-xxxxx/certmap.conf'. Error: No such file or directory
> > [19/08/19:13:41:30] - [Setup] Fatal Error: Could not create directory server instance 'xxxxxxxx'.
> > [19/08/19:13:41:30] - [Setup] Fatal Exiting . . .
> > Log file is '/tmp/setupwT17yV.log'
> >
>
> So the server failed to setup? Can you show me the output of:
>
> find /etc/dirsrv
>
>
>
>
> > On Mon, Aug 19, 2019 at 7:41 PM William Brown <wbrown@xxxxxxx> wrote:
> >
> >
> > > On 20 Aug 2019, at 01:54, Chase Miller <chasejmiller@xxxxxxxxx> wrote:
> > >
> > > Hello,
> > >
> > > I have a fresh install of Centos 7.
> > > (this is not my first install of Directory Server, btw)
> > >
> > > Followed this article:
> > > https://webhostinggeeks.com/howto/setup-389-directory-server-on-centos-7/
> > >
> > >
> > > cat setupV6AAJP.log
> > > [19/08/19:08:49:28] - [Setup] Info This program will set up the 389 Directory and Administration Servers.
> > >
> > > It is recommended that you have "root" privilege to set up the software.
> > > Tips for using this program:
> > > - Press "Enter" to choose the default and go to the next screen
> > > - Type "Control-B" then "Enter" to go back to the previous screen
> > > - Type "Control-C" to cancel the setup program
> > >
> > > [19/08/19:08:49:28] - [Setup] Info Would you like to continue with set up?
> > > [19/08/19:08:49:31] - [Setup] Info yes
> > > [19/08/19:08:49:31] - [Setup] Info Your system has been scanned for potential problems, missing patches,
> > > etc. The following output is a report of the items found that need to
> > > be addressed before running this software in a production
> > > environment.
> > >
> > > 389 Directory Server system tuning analysis version 14-JULY-2016.
> > >
> > > NOTICE : System is x86_64-unknown-linux3.10.0-957.27.2.el7.x86_64 (2 processors).
> > >
> > > [19/08/19:08:49:31] - [Setup] Info Would you like to continue?
> > > [19/08/19:08:49:39] - [Setup] Info yes
> > > [19/08/19:08:49:39] - [Setup] Info Choose a setup type:
> > >
> > > 1. Express
> > > Allows you to quickly set up the servers using the most
> > > common options and pre-defined defaults. Useful for quick
> > > evaluation of the products.
> > >
> > > 2. Typical
> > > Allows you to specify common defaults and options.
> > >
> > > 3. Custom
> > > Allows you to specify more advanced options. This is
> > > recommended for experienced server administrators only.
> > >
> > > To accept the default shown in brackets, press the Enter key.
> > >
> > > [19/08/19:08:49:39] - [Setup] Info Choose a setup type
> > > [19/08/19:08:49:40] - [Setup] Info 2
> > > [19/08/19:08:49:40] - [Setup] Info Enter the fully qualified domain name of the computer
> > > on which you're setting up server software. Using the form
> > > <hostname>.<domainname>
> > > Example: eros.example.com.
> > >
> > > To accept the default shown in brackets, press the Enter key.
> > >
> > > Warning: This step may take a few minutes if your DNS servers
> > > can not be reached or if DNS is not configured correctly. If
> > > you would rather not wait, hit Ctrl-C and run this program again
> > > with the following command line option to specify the hostname:
> > >
> > > General.FullMachineName=your.hostname.domain.name
> > >
> > > [19/08/19:08:49:40] - [Setup] Info Computer name
> > > [19/08/19:08:49:42] - [Setup] Info xxxxx.xxxx.com
> > > [19/08/19:08:49:42] - [Setup] Info The servers must run as a specific user in a specific group.
> > > It is strongly recommended that this user should have no privileges
> > > on the computer (i.e. a non-root user). The setup procedure
> > > will give this user/group some permissions in specific paths/files
> > > to perform server-specific operations.
> > >
> > > If you have not yet created a user and group for the servers,
> > > create this user and group using your native operating
> > > system utilities.
> > >
> > > [19/08/19:08:49:42] - [Setup] Info System User
> > > [19/08/19:08:49:48] - [Setup] Info dirsrv
> > > [19/08/19:08:49:48] - [Setup] Info System Group
> > > [19/08/19:08:49:49] - [Setup] Info dirsrv
> > > [19/08/19:08:49:49] - [Setup] Info Server information is stored in the configuration directory server.
> > > This information is used by the console and administration server to
> > > configure and manage your servers. If you have already set up a
> > > configuration directory server, you should register any servers you
> > > set up or create with the configuration server. To do so, the
> > > following information about the configuration server is required: the
> > > fully qualified host name of the form
> > > <hostname>.<domainname>(e.g. hostname.example.com), the port number
> > > (default 389), the suffix, the DN and password of a user having
> > > permission to write the configuration information, usually the
> > > configuration directory administrator, and if you are using security
> > > (TLS/SSL). If you are using TLS/SSL, specify the TLS/SSL (LDAPS) port
> > > number (default 636) instead of the regular LDAP port number, and
> > > provide the CA certificate (in PEM/ASCII format).
> > >
> > > If you do not yet have a configuration directory server, enter 'No' to
> > > be prompted to set up one.
> > >
> > > [19/08/19:08:49:49] - [Setup] Info Do you want to register this software with an existing
> > > configuration directory server?
> > > [19/08/19:08:49:52] - [Setup] Info no
> > > [19/08/19:08:49:52] - [Setup] Info Please enter the administrator ID for the configuration directory
> > > server. This is the ID typically used to log in to the console. You
> > > will also be prompted for the password.
> > >
> > > [19/08/19:08:49:52] - [Setup] Info Configuration directory server
> > > administrator ID
> > > [19/08/19:08:49:57] - [Setup] Info admin
> > > [19/08/19:08:49:57] - [Setup] Info Password
> > > [19/08/19:08:50:06] - [Setup] Info Password (confirm)
> > > [19/08/19:08:50:08] - [Setup] Info The information stored in the configuration directory server can be
> > > separated into different Administration Domains. If you are managing
> > > multiple software releases at the same time, or managing information
> > > about multiple domains, you may use the Administration Domain to keep
> > > them separate.
> > >
> > > If you are not using administrative domains, press Enter to select the
> > > default. Otherwise, enter some descriptive, unique name for the
> > > administration domain, such as the name of the organization
> > > responsible for managing the domain.
> > >
> > > [19/08/19:08:50:08] - [Setup] Info Administration Domain
> > > [19/08/19:08:50:10] - [Setup] Info xxxx.com
> > > [19/08/19:08:50:10] - [Setup] Info The standard directory server network port number is 389. However, if
> > > you are not logged as the superuser, or port 389 is in use, the
> > > default value will be a random unused port number greater than 1024.
> > > If you want to use port 389, make sure that you are logged in as the
> > > superuser, that port 389 is not in use.
> > >
> > > [19/08/19:08:50:10] - [Setup] Info Directory server network port
> > > [19/08/19:08:50:12] - [Setup] Info 389
> > > [19/08/19:08:50:12] - [Setup] Info Each instance of a directory server requires a unique identifier.
> > > This identifier is used to name the various
> > > instance specific files and directories in the file system,
> > > as well as for other uses as a server instance identifier.
> > >
> > > [19/08/19:08:50:12] - [Setup] Info Directory server identifier
> > > [19/08/19:08:50:13] - [Setup] Info xxxxxxx
> > > [19/08/19:08:50:13] - [Setup] Info The suffix is the root of your directory tree. The suffix must be a valid DN.
> > > It is recommended that you use the dc=domaincomponent suffix convention.
> > > For example, if your domain is example.com,
> > > you should use dc=example,dc=com for your suffix.
> > > Setup will create this initial suffix for you,
> > > but you may have more than one suffix.
> > > Use the directory server utilities to create additional suffixes.
> > >
> > > [19/08/19:08:50:13] - [Setup] Info Suffix
> > > [19/08/19:08:50:14] - [Setup] Info dc=xxxx, dc=com
> > > [19/08/19:08:50:14] - [Setup] Info Certain directory server operations require an administrative user.
> > > This user is referred to as the Directory Manager and typically has a
> > > bind Distinguished Name (DN) of cn=Directory Manager.
> > > You will also be prompted for the password for this user. The password must
> > > be at least 8 characters long, and contain no spaces.
> > > Press Control-B or type the word "back", then Enter to back up and start over.
> > >
> > > [19/08/19:08:50:14] - [Setup] Info Directory Manager DN
> > > [19/08/19:08:50:16] - [Setup] Info cn=Directory Manager
> > > [19/08/19:08:50:16] - [Setup] Info Password
> > > [19/08/19:08:50:19] - [Setup] Info Password (confirm)
> > > [19/08/19:08:50:21] - [Setup] Info The Administration Server is separate from any of your web or application
> > > servers since it listens to a different port and access to it is
> > > restricted.
> > >
> > > Pick a port number between 1024 and 65535 to run your Administration
> > > Server on. You should NOT use a port number which you plan to
> > > run a web or application server on, rather, select a number which you
> > > will remember and which will not be used for anything else.
> > >
> > > [19/08/19:08:50:21] - [Setup] Info Administration port
> > > [19/08/19:08:50:22] - [Setup] Info 9830
> > > [19/08/19:08:50:22] - [Setup] Info The interactive phase is complete. The script will now set up your
> > > servers. Enter No or go Back if you want to change something.
> > >
> > > [19/08/19:08:50:22] - [Setup] Info Are you ready to set up your servers?
> > > [19/08/19:08:50:24] - [Setup] Info yes
> > > [19/08/19:08:50:24] - [Setup] Info Creating directory server . . .
> > > [19/08/19:08:50:30] - [Setup] Info Your new DS instance 'xxxxx' was successfully created.
> > > [19/08/19:08:50:30] - [Setup] Info Creating the configuration directory server . . .
> > > [19/08/19:08:50:33] - [Setup] Fatal Error: failed to open an LDAP connection to host 'xxxxxx.xxxx.com' port '389' as user 'cn=Directory Manager'. Error: unknown.
> > > [19/08/19:08:50:33] - [Setup] Fatal Failed to create the configuration directory server
> > > [19/08/19:08:50:33] - [Setup] Fatal Exiting . . .
> > > Log file is '/tmp/setupV6AAJP.log'
> >
> > Can you show the output of `ss -tlnp` from the server? Maybe also `systemctl status dirsrv@xxxx` and the content of /var/log/dirsrv/slapd-xxxxx/errors
> >
> > I also recommend you look at the Red Hat Directory Server documentation for version 10 - that aligns to Centos7 and the server packages there, and is maintained by Marc and the team here on this list. It's an excellent place for help.
> >
> > Hope that helps,
> >
> > —
> > Sincerely,
> >
> > William Brown
> >
> > Senior Software Engineer, 389 Directory Server
> > SUSE Labs
> > _______________________________________________
> > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
> > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
> > _______________________________________________
> > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
> > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
>
> —
> Sincerely,
>
> William Brown
>
> Senior Software Engineer, 389 Directory Server
> SUSE Labs
> _______________________________________________
> 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
> _______________________________________________
> 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
—
Sincerely,
William Brown
Senior Software Engineer, 389 Directory Server
SUSE Labs
_______________________________________________
389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
