|
We were on version: 389-ds-base-1.3.7.5-24.
The nsslapd-cache-autosize was set to 0. We apply our own values.
To keep us afloat we have been forced to enable nsslapd-cache-autosize. However, our performance has degraded in response times and feel we are not able to better allocate/customize the cache settings as they relate to each database.
System: Virtual Machine 8-CPU 64GB RAM (of which 35G is free)
Two databases in the slapd instance: userRoot = 21G groupRoot = 1.8G
When we try to allocate anything above 50% for nsslapd-cache-autosize, the service fails to start stating values cannot exceed 100.
When we disable nsslapd-cache-autosize, and punch in our numbers:
nsslapd-cache-autosize = 0 nsslapd-dbcachesize = 1073741824 nsslapd-cachememsize = 2147483648 (groupRoot) and 23622320128 (userRoot)
Service overwrites our settings and sets both databases to 2147483648. While that is ok for groupRoot, it is not for userRoot.
Based on this information, is there a way/recommendation to:
I would offer logs if I could, but we cannot get them off the system. It is hosted in a disconnected environment.
Paul M. Whitney, RHCSA,
CISSP
Chesapeake IT Consulting, Inc. 2680 Tobacco Rd Chesapeake Beach, MD 20732 Work: 443-492-2872 Cell: 410.493.9448 Email: paul.whitney@xxxxxxxxxxxxxxxxx
CONFIDENTIALITY NOTICE
The information contained in this facsimile or electronic message is confidential information intended for the use of the individual or entity named above. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this facsimile message to the intended recipient, you are hereby notified that any dissemination, or copying of this communication is strictly prohibited. If this message contains non-public personal information about any consumer or customer of the sender or intended recipient, you are further prohibited under penalty of law from using or disclosing the information to any third party by provisions of the federal Gramm-Leach-Bliley Act. If you have received this facsimile or electronic message in error, please immediately notify us by telephone and return or destroy the original message to assure that it is not read, copied, or distributed by others. From: William Brown <wbrown@xxxxxxx>
Sent: Tuesday, January 15, 2019 7:22:18 PM To: 389-users@xxxxxxxxxxxxxxxxxxxxxxx Cc: Paul Whitney Subject: Re: [389-users] Problem with userRoot cache > On 16 Jan 2019, at 06:49, Mark Reynolds <mreynolds@xxxxxxxxxx> wrote: > > What version were you previously on? > > Sounds like an issue with autocache sizing. The errors log might give more info about why its being reset. > > Also check if "nsslapd-cache-autosize" is set under "cn=config,cn=ldbm database,cn=plugins,cn=config". If it is, set it to zero to stop the autosizing. Certainly is sounds like autosizing is still enabled here and is just resetting your values on you. > > > On 1/15/19 3:42 PM, Paul Whitney wrote: >> We recently updated to 389-ds-base-1.3.8.4-18. I am not sure I can attribute this issue to this update since we are now just discovering it. But setting the nsslapd-cachememsize is reverting to a default value of 2GB. I have attempted to restore the value through the console and restarting the instance. I have also tried by stopping instance and manually editing the dse.ldif file. In both cases, the value is replaced with 2GB value. >> >> Any suggestions? >> >> Paul M. Whitney >> RHCSA, VCP, CISSP, Security+ >> Chesapeake IT Consulting, Inc. >> 2680 Tobacco Rd >> Chesapeake Beach, MD 20732 >> >> Work: 443-492-2872 >> Cell: 410.493.9448 >> Email: paul.whitney@xxxxxxxxxxxxxxxxx >> CONFIDENTIALITY NOTICE >> The information contained in this facsimile or electronic message is confidential information intended for the use of the individual or entity named above. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this facsimile message to the intended recipient, you are hereby notified that any dissemination, or copying of this communication is strictly prohibited. If this message contains non-public personal information about any consumer or customer of the sender or intended recipient, you are further prohibited under penalty of law from using or disclosing the information to any third party by provisions of the federal Gramm-Leach-Bliley Act. If you have received this facsimile or electronic message in error, please immediately notify us by telephone and return or destroy the original message to assure that it is not read, copied, or distributed by others. >> >> >> >> _______________________________________________ >> 389-users mailing list -- >> 389-users@xxxxxxxxxxxxxxxxxxxxxxx >> >> To unsubscribe send an email to >> 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx >> >> Fedora Code of Conduct: >> https://getfedora.org/code-of-conduct.html >> >> List Guidelines: >> https://fedoraproject.org/wiki/Mailing_list_guidelines >> >> List Archives: >> https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx > _______________________________________________ > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx — Sincerely, William Brown Software Engineer, 389 Directory Server SUSE Labs |
_______________________________________________ 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/389-users@xxxxxxxxxxxxxxxxxxxxxxx
