Hello Julia, I’m troubleshooting this exact behavior. So far I’ve found if you create an /etc/dirsrv/admin-serv/adm.conf before the silent install it works. However we just went through a host domain name change (long story) and I’m having I think unrelated problems. I hope to resolve that shortly and then I might have a more definitive answer. In the mean time this may be helpful to you: https://github.com/morganllj/ansible-playbooks/blob/develop/templates/389_primary_master_setup.inf.j2 https://github.com/morganllj/ansible-playbooks/blob/develop/templates/adm.conf.j2 Here’s where they’re used if you are familiar with ansible: https://github.com/morganllj/ansible-playbooks/blob/develop/install_389.yml -morgan > On Sep 15, 2017, at 11:49 AM, Julian Kippels <kippels@xxxxxx> wrote: > > Hi, > > I was playing around with silent installs and found out that the final > configuration differs from interactive installations. Here is what I > did: > > I installed two servers on different machines ds-1.localdomain and > ds-2.localdomain. ds-1 is used as a master and ds-2 is supposed to use > it as its configuration server. > Both machines run RHEL 7.4 with the latest EPEL-builds of 389-ds. > > First I used setup-ds-admin.pl --keepcache interactively first on ds-1 > and told it not to use an existing configuration server, then on ds-2 > and told it to use ds-1. When I connect to ds-1 using 389-console I can > see both ds-1 and ds-2. > Then I took the generated .inf-files, removed all traces from the > previous instances from both machines using remove-ds-admin.pl -a -f -y > and then ran setup-ds-admin.pl --silent --file=ds-1.inf and > --file=ds-2.inf respectively. When I connect to ds-1 now, I only see > ds-1, to see ds-2 I have to connect to ds-2 with 389-console. > > The .inf-files look like this: > -------- > $ cat ds-1.inf > [General] > AdminDomain = localdomain > ConfigDirectoryAdminID = admin > ConfigDirectoryAdminPwd = XXX > ConfigDirectoryLdapURL = ldap://ds-1.localdomain:389/o=NetscapeRoot > FullMachineName = ds-1.localdomain > ServerRoot = /usr/lib64/dirsrv > StrictHostCheck = true > SuiteSpotGroup = dirsrv > SuiteSpotUserID = dirsrv > [admin] > Port = 9830 > ServerAdminID = admin > ServerAdminPwd = XXX > ServerIpAddress = 0.0.0.0 > SysUser = dirsrv > [slapd] > start_server = 0 > AddOrgEntries = Yes > AddSampleEntries = No > HashedRootDNPwd = XXX > InstScriptsEnabled = true > InstallLdifFile = suggest > RootDN = cn=Directory Manager > RootDNPwd = XXX > ServerIdentifier = ds-1 > ServerPort = 389 > SlapdConfigForMC = yes > Suffix = dc=localdomain > UseExistingMC = 0 > bak_dir = /var/lib/dirsrv/slapd-ds-1/bak > bindir = /usr/bin > cert_dir = /etc/dirsrv/slapd-ds-1 > config_dir = /etc/dirsrv/slapd-ds-1 > datadir = /usr/share > db_dir = /var/lib/dirsrv/slapd-ds-1/db > ds_bename = userRoot > inst_dir = /usr/lib64/dirsrv/slapd-ds-1 > ldif_dir = /var/lib/dirsrv/slapd-ds-1/ldif > localstatedir = /var > lock_dir = /var/lock/dirsrv/slapd-ds-1 > log_dir = /var/log/dirsrv/slapd-ds-1 > naming_value = rz > run_dir = /var/run/dirsrv > sbindir = /usr/sbin > schema_dir = /etc/dirsrv/slapd-ds-1/schema > sysconfdir = /etc > tmp_dir = /tmp > -------- > $ cat ds-2.inf > [General] > AdminDomain = localdomain > ConfigDirectoryAdminID = admin > ConfigDirectoryAdminPwd = XXX > ConfigDirectoryLdapURL = ldap://ds-1.localdomain:389/o=NetscapeRoot > FullMachineName = ds-2.localdomain > ServerRoot = /usr/lib64/dirsrv > StrictHostCheck = true > SuiteSpotGroup = dirsrv > SuiteSpotUserID = dirsrv > [admin] > Port = 9830 > ServerAdminID = admin > ServerAdminPwd = XXX > ServerIpAddress = 0.0.0.0 > SysUser = dirsrv > [slapd] > AddOrgEntries = Yes > AddSampleEntries = No > HashedRootDNPwd = XXX > InstScriptsEnabled = true > InstallLdifFile = suggest > RootDN = cn=Directory Manager > RootDNPwd = XXX > ServerIdentifier = ds-2 > ServerPort = 389 > Suffix = dc=localdomain > UseExistingMC = 1 > bak_dir = /var/lib/dirsrv/slapd-ds-2/bak > bindir = /usr/bin > cert_dir = /etc/dirsrv/slapd-ds-2 > config_dir = /etc/dirsrv/slapd-ds-2 > datadir = /usr/share > db_dir = /var/lib/dirsrv/slapd-ds-2/db > ds_bename = userRoot > inst_dir = /usr/lib64/dirsrv/slapd-ds-2 > ldif_dir = /var/lib/dirsrv/slapd-ds-2/ldif > localstatedir = /var > lock_dir = /var/lock/dirsrv/slapd-ds-2 > log_dir = /var/log/dirsrv/slapd-ds-2 > naming_value = rz > run_dir = /var/run/dirsrv > sbindir = /usr/sbin > schema_dir = /etc/dirsrv/slapd-ds-2/schema > sysconfdir = /etc > tmp_dir = /tmp > > I think this unintended behaviour and should be fixed. Unless I did a > mistake somewhere, but I can't see where… > > Julian > _______________________________________________ > 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx _______________________________________________ 389-users mailing list -- 389-users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to 389-users-leave@xxxxxxxxxxxxxxxxxxxxxxx
