Re: [389-users] Multimaster replication query

["s.varadha rajan" <rajanvaradhu@xxxxxxxxx>]

Hi Rich,

Please let me know, where can i get modified "mmr.pl" as per my below requirement.

Best Regards,

Varad

On Fri, Jun 17, 2011 at 7:46 PM, Rich Megginson <rmeggins@xxxxxxxxxx> wrote:

On 06/16/2011 11:45 PM, s.varadha rajan wrote:

Hi,

i ran the below command in supplier side and the output is,

# extended LDIF

#

# LDAPv3

# base <cn=config> with scope subtree

# filter: (objectclass=nsds5replicationagreement)

# requesting: ALL

#

# Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com po

 rt 389, replica, o\3Dnetscaperoot, mapping tree, config

dn: cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.c

 om port 389",cn=replica,cn="o=netscaperoot",cn=mapping tree,cn=config

objectClass: top

objectClass: nsDS5ReplicationAgreement

cn: "Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com 

 port 389"

nsDS5ReplicaHost: sam.xxx.xxx.com

nsDS5ReplicaRoot: o=netscaperoot

This is the problem.  I doubt that you wanted to replicate o=netscaperoot.  You probably wanted to replicate your user data suffix e.g. dc=example,dc=com.

Can someone please fix mmr.pl?

nsDS5ReplicaPort: 389

nsDS5ReplicaBindDN: cn=repman,cn=config

nsDS5ReplicaBindMethod: simple

nsds5replicaTimeout: 120

nsDS5ReplicaCredentials: {DES}VdEnvxoUkmw1TpV1QyVPtg==

nsds5replicareapactive: 0

nsds5replicaLastUpdateStart: 20110616123147Z

nsds5replicaLastUpdateEnd: 20110616123147Z

nsds5replicaChangesSentSinceStartup:: MToxNC8wIA==

nsds5replicaLastUpdateStatus: 0 Incremental update succeeded

nsds5replicaUpdateInProgress: FALSE

nsds5replicaLastInitStart: 20110616104148Z

nsds5replicaLastInitEnd: 20110616104153Z

nsds5replicaLastInitStatus: 0 Total update succeeded

# search result

search: 2

result: 0 Success

# numResponses: 2

# numEntries: 1

Regards,

Varad

On Thu, Jun 16, 2011 at 8:47 PM, Rich Megginson <rmeggins@xxxxxxxxxx> wrote:

On 06/16/2011 07:33 AM, s.varadha rajan wrote:

Hi,

For me no issues to recive the logs.anyway, i have performed the following steps again,

1.Stop the "dirsrv" on both sides.

2.Enabled "nsslapd-errorlog-level: 8192" on both servers in "dse.ldif" file.

3.Started the "dirsrv" on both servers.

4.Export the datas in .ldif and imported to "sam" system

4.From "varad.xxx.xxx.com,Remove the agreement again (./mmr.pl --host1 varad.xxx.xxx.com --host2 sam.xxx.xxx.com --host1_id 1 --host2_id 2 --bindpw <password> --repmanpw <password> --remove)

5.From "varad.xxx.xxx.com,Created agreement again (./mmr.pl --host1 varad.xxx.xxx.com --host2 sam.xxx.xxx.com --host1_id 1 --host2_id 2 --bindpw <password> --repmanpw <password> --create)

6.Then created one user under "ou=people" , as a uid=TT in supplier side (varad.xxx.xxx.com)

7.but not replicated in other system...

Supplier system (/var/log/dirsrv/slapd-varad/errors): (varad.xxx.xxx.com):

[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): Disconnected from the consumer

[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: start -> ready_to_acquire_replica

[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: ready_to_acquire_replica -> wait_for_changes

[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: wait_for_changes -> wait_for_changes

[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: wait_for_changes -> start

[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): No linger to cancel on the connection

[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): Disconnected from the consumer

[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: start -> ready_to_acquire_replica

[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: ready_to_acquire_replica -> wait_for_changes

Consumer system: (sam.xxx.xxx.xom):

[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): Disconnected from the consumer

[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: start -> ready_to_acquire_replica

[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: ready_to_acquire_replica -> wait_for_changes

[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: wait_for_changes -> wait_for_changes

[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: wait_for_changes -> start

[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): No linger to cancel on the connection

[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): Disconnected from the consumer

[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: start -> ready_to_acquire_replica

[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: ready_to_acquire_replica -> wait_for_changes

So,please let me know what is the problem ? and how to resolve ?

on the supplier
ldapsearch -x -D "cn=directory manager" -W -b cn=config '(objectclass=nsds5replicationagreement)'

Regards,

Varad

On Wed, Jun 15, 2011 at 7:41 PM, Rich Megginson <rmeggins@xxxxxxxxxx> wrote:

On 06/14/2011 11:59 PM, s.varadha rajan wrote:

Hi,

Thanks for the reply.that's ok.but if i create one new user in supplier side,it's not replicating to consumer side.i think ubuntu 10.04 LTS supports fedora-ds 1.1.x and dont have updated ppa links. for this case, shall i upgrade the latest version, will give the solution? After upgrade, how can i migrate my existing data.

First check your errors log on your supplier side to see if there are any errors during the incremental update phase (the messages below are from the init phase), then check the access log on the consumer side to see if the supplier is connecting and attempting to send the new user.

If that shows nothing, then try enabling the replication log level - http://directory.fedoraproject.org/wiki/FAQ#Troubleshooting

or give me a solution for this.

Regards,

Varad

On Tue, Jun 14, 2011 at 8:26 PM, Rich Megginson <rmeggins@xxxxxxxxxx> wrote:

On 06/14/2011 08:23 AM, s.varadha rajan wrote:

Hi,

I followed the procedure to configure "multi-master replication" as per http://directory.fedoraproject.org/wiki/Howto:MultiMasterReplication. but i got an error as 

From consumer side:

14/Jun/2011:19:25:41 +051800] NSMMReplicationPlugin - multimaster_be_state_change: replica o=netscaperoot is coming online; enabling replication
[14/Jun/2011:19:25:41 +051800] NSMMReplicationPlugin - replica_reload_ruv: Warning: new data for replica o=netscaperoot does not match the data in the changelog.
 Recreating the changelog file. This could affect replication with replica's  consumers in which case the consumers should be reinitialized.

This is not an error.  It just means the consumer has been initialized with data from the master, and it had old data (probably from setup) which was wiped out.

From Supplier side:

[14/Jun/2011:19:26:12 +051800] NSMMReplicationPlugin - Beginning total update of replica "agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389)".
[14/Jun/2011:19:26:15 +051800] NSMMReplicationPlugin - Finished total update of replica "agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389)". Sent 120 entries.

We are using the OS-Ubuntu 10.04. I searched in google and got the some result in "https://bugzilla.redhat.com/show_bug.cgi?id=388021". but i dont know how to fix this.Please help on this.

Regards,

Varad

On Mon, May 30, 2011 at 12:27 PM, s.varadha rajan <rajanvaradhu@xxxxxxxxx> wrote:
>
> Hi,
>
> Thanks for the reply.I will try and update you further.
>
> Regards,
> Varad
>
>
>
> On Fri, May 27, 2011 at 8:30 PM, Rich Megginson <rmeggins@xxxxxxxxxx> wrote:
>>
>> On 05/27/2011 12:11 AM, s.varadha rajan wrote:
>>
>> Hi,
>>
>> Can i get any update on my below query ?
>>
>> Regards,
>> Varad
>>
>> On Tue, May 24, 2011 at 6:17 PM, s.varadha rajan <rajanvaradhu@xxxxxxxxx> wrote:
>>>
>>> Hi,
>>> We are using Ubuntu 10.04 server OS and all the web applications are running on that.We have already implemented fedora-ds for ldap auth.now we are planning to go some up-gradation.kindly let me know the following,
>>> 1.How to migrate running fedora-ds server to another server ? 
>>> 2.i have taken all the user/group+etc in ldif format.is it enough for migration or any other db (/var/lib/dirsrv/slapd-<instance>) also need to bacup ?
>>
>> LDIF should be fine.
>>>
>>> if any procedure please share with me ? how to import/export .ldif file
>>
>> /usr/lib[64]/dirsrv/slapd-INSTNAME/db2ldif - export database to ldif
>> /usr/lib[64]/dirsrv/slapd-INSTNAME/ldif2db - import database from ldif
>>>
>>> 3.in our setup,one server is in public network.so i am planning to do replication through "ldaps", i.e local server to public server replication through highly secure how to ?
>>
>> Not exactly, but there is plenty of documentation - see http://docs.redhat.com/docs/en-US/Red_Hat_Directory_Server/8.2/html-single/Administration_Guide/index.html#Managing_Replication-Replication_Overview
>>>
>>> Please help me on the above topics.
>>> Regards,
>>> Varad
>>
>> --
>> 389 users mailing list
>> 389-users@xxxxxxxxxxxxxxxxxxxxxxx
>> https://admin.fedoraproject.org/mailman/listinfo/389-users
>

--
389 users mailing list
389-users@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/389-users