Holy cats...it worked! Cyrus is goin now... And, db4-devel is the same name in FC3...yum is even nice enough to have it! Nathan Kinder wrote: > In addition to what Rob mentioned below, your build is not finding the > gssapi header files. I checked on my FC3 machine, and the gssapi > include location is /usr/include/gssapi. You should change your > configure line to have "--enable-gssapi=/usr/include/gssapi". > > -NGK > > Rob Crittenden wrote: > >> This info was great, thanks. >> >> My FC3 box is offline right now but I re-made my cyrus-sasl in RHEL 3 >> and I noticed a few differences. >> >> One is when configure is checking for database support (db, ndbm, >> etc). It is found for me, not for you. >> >> Can you try installing db4-devel-4.1.25-8.1 (or whatever the >> equivalent is on FC3)? >> >> Another difference I saw is in pam_start in -lpam. I don't know if >> this is anything to worry about or not. >> >> rob >> >> Jason Kullo Sam wrote: >> >>> Noriko Hosoi wrote: >>> >>>> My cyrus sasl build creates a symbolic link to the lib directory >>>> like this. Do you see it in your build log? >>>> >>>>> [...] >>>>> adding static plugins and dependencies >>>>> ar cru .libs/libsasl2.a ../plugins/sasldb.o >>>>> ../sasldb/db_berkeley.o ../sasldb/allockey.o ../plugins/cram.o >>>>> ../plugins/digestmd5.o ../plugins/gssapi.o ../plugins/plain.o >>>>> ../plugins/anonymous.o >>>>> rm -f libsasl2.a >>>>> *ln -s .libs/libsasl2.a libsasl2.a* >>>>> gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib' >>>> >>>> >>>> >>>> >>>> >>>> --noriko >>>> >>>> Richard Megginson wrote: >>>> >>>>> There is still no libsasl2.a. I'm not sure what the problem is. >>>>> Try using "make" instead of "gmake" - perhaps gmake is slightly >>>>> different on your OS/version? >>>>> >>> =========================== >>> Answering both of these... >>> I cleaned and blew up the directory again, and started over. Even >>> fixed a typo in the configure portion(apparently this typo allowed >>> it to finish before). The configureation was done, but the make >>> failed. It doesn't look like it ever even MAKES the libsasl2.a, >>> nevermind links it... >>> >>> Here's the whole shabang in case my noobness is leaving something >>> important out... >>> ================================================================= >>> [root at genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf - >>> tar: Read 2048 bytes from - >>> [root at genie ds]# cd cyrus-sasl-2.1.20 >>> [root at genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure >>> --enable-gssapi=/usr/kerberos/include/ --enable-static --without-des >>> --without-openssl >>> configure: creating cache ./config.cache >>> checking build system type... i686-pc-linux-gnu >>> checking host system type... i686-pc-linux-gnu >>> checking target system type... i686-pc-linux-gnu >>> checking for a BSD-compatible install... /usr/bin/install -c >>> checking whether build environment is sane... yes >>> checking for gawk... gawk >>> checking whether make sets $(MAKE)... yes >>> checking for gcc... gcc >>> checking for C compiler default output... a.out >>> checking whether the C compiler works... yes >>> checking whether we are cross compiling... no >>> checking for suffix of executables... >>> checking for suffix of object files... o >>> checking whether we are using the GNU C compiler... yes >>> checking whether gcc accepts -g... yes >>> checking for gcc option to accept ANSI C... none needed >>> checking for style of include used by make... GNU >>> checking dependency style of gcc... gcc3 >>> checking how to run the C preprocessor... gcc -E >>> checking for gawk... (cached) gawk >>> checking whether ln -s works... yes >>> checking whether make sets $(MAKE)... (cached) yes >>> checking for a BSD-compatible install... /usr/bin/install -c >>> checking for __attribute__... yes >>> checking for runpath switch... -Wl,-rpath, >>> checking for ranlib... ranlib >>> checking for ld used by GCC... /usr/bin/ld >>> checking if the linker (/usr/bin/ld) is GNU ld... yes >>> checking for BSD-compatible nm... /usr/bin/nm -B >>> updating cache ./config.cache >>> loading cache ./config.cache within ltconfig >>> checking for object suffix... o >>> checking for executable suffix... (cached) >>> checking for gcc option to produce PIC... -fPIC >>> checking if gcc PIC flag -fPIC works... yes >>> checking if gcc supports -c -o file.o... yes >>> checking if gcc supports -c -o file.lo... yes >>> checking if gcc supports -fno-rtti -fno-exceptions ... no >>> checking if gcc static flag -static works... -static >>> checking if the linker (/usr/bin/ld) is GNU ld... yes >>> checking whether the linker (/usr/bin/ld) supports shared >>> libraries... yes >>> checking command to parse /usr/bin/nm -B output... ok >>> checking how to hardcode library paths into programs... immediate >>> checking for /usr/bin/ld option to reload object files... -r >>> checking dynamic linker characteristics... Linux ld.so >>> checking if libtool supports shared libraries... yes >>> checking whether to build shared libraries... yes >>> checking whether to build static libraries... yes >>> checking for objdir... .libs >>> creating libtool >>> updating cache ./config.cache >>> configure: loading cache ./config.cache >>> checking for connect... yes >>> checking for res_search... no >>> checking for res_search in -lresolv... yes >>> checking for dn_expand... yes >>> checking for dns_lookup... no >>> checking DB path to use... /etc/sasldb2 >>> checking for egrep... grep -E >>> checking for ANSI C header files... yes >>> checking for sys/types.h... yes >>> checking for sys/stat.h... yes >>> checking for stdlib.h... yes >>> checking for string.h... yes >>> checking for memory.h... yes >>> checking for strings.h... yes >>> checking for inttypes.h... yes >>> checking for stdint.h... yes >>> checking for unistd.h... yes >>> checking db.h usability... no >>> checking db.h presence... no >>> checking for db.h... no >>> checking ndbm.h usability... no >>> checking ndbm.h presence... no >>> checking for ndbm.h... no >>> checking gdbm.h usability... no >>> checking gdbm.h presence... no >>> checking for gdbm.h... no >>> checking DB library to use... no >>> configure: WARNING: Disabling SASL authentication database support >>> checking for dlopen in -ldl... yes >>> checking /dev/random to use... /dev/random >>> checking for nm... /usr/bin/nm -B >>> checking for underscore before symbols... no >>> checking for syslog... yes >>> checking for pam_start in -lpam... no >>> checking if I should include saslauthd... /var/state/saslauthd >>> checking to include Courier authdaemond support... /dev/null >>> checking if I should include pwcheck... no >>> checking if I should include the alwaystrue verifier... no >>> checking if we should enable sasl_checkapop... enabled >>> checking CRAM-MD5... enabled >>> checking for OpenSSL... no >>> configure: WARNING: No DES support for DIGEST-MD5 >>> checking DIGEST-MD5... enabled >>> configure: WARNING: OpenSSL not found -- OTP will be disabled >>> checking OTP... disabled >>> configure: WARNING: OpenSSL not found -- SRP will be disabled >>> checking SRP... disabled >>> checking KERBEROS_V4... disabled >>> checking for crypt... no >>> checking for crypt in -lcrypt... yes >>> checking gssapi.h usability... no >>> checking gssapi.h presence... no >>> checking for gssapi.h... no >>> checking gssapi/gssapi.h usability... no >>> checking gssapi/gssapi.h presence... no >>> checking for gssapi/gssapi.h... no >>> configure: WARNING: Disabling GSSAPI - no include files found >>> checking GSSAPI... disabled >>> checking PLAIN... enabled >>> checking ANONYMOUS... enabled >>> checking LOGIN... disabled >>> configure: WARNING: OpenSSL not found -- NTLM will be disabled >>> checking NTLM... disabled >>> checking SQL... disabled >>> checking for dmalloc library... no >>> checking for sfio library... no >>> checking for getsubopt... yes >>> checking for snprintf... yes >>> checking for vsnprintf... yes >>> checking for inet_aton in -lresolv... yes >>> checking for getaddrinfo... yes >>> checking for gai_strerror... yes >>> checking for getnameinfo... yes >>> checking for an ANSI C-conforming const... yes >>> checking for inline... inline >>> checking for mode_t... yes >>> checking for pid_t... yes >>> checking return type of signal handlers... void >>> checking whether time.h and sys/time.h may both be included... yes >>> checking for ANSI C header files... (cached) yes >>> checking for dirent.h that defines DIR... yes >>> checking for library containing opendir... none required >>> checking for sys/wait.h that is POSIX.1 compatible... yes >>> checking dlfcn.h usability... yes >>> checking dlfcn.h presence... yes >>> checking for dlfcn.h... yes >>> checking fcntl.h usability... yes >>> checking fcntl.h presence... yes >>> checking for fcntl.h... yes >>> checking limits.h usability... yes >>> checking limits.h presence... yes >>> checking for limits.h... yes >>> checking malloc.h usability... yes >>> checking malloc.h presence... yes >>> checking for malloc.h... yes >>> checking paths.h usability... yes >>> checking paths.h presence... yes >>> checking for paths.h... yes >>> checking for strings.h... (cached) yes >>> checking sys/file.h usability... yes >>> checking sys/file.h presence... yes >>> checking for sys/file.h... yes >>> checking sys/time.h usability... yes >>> checking sys/time.h presence... yes >>> checking for sys/time.h... yes >>> checking syslog.h usability... yes >>> checking syslog.h presence... yes >>> checking for syslog.h... yes >>> checking for unistd.h... (cached) yes >>> checking for inttypes.h... (cached) yes >>> checking sys/uio.h usability... yes >>> checking sys/uio.h presence... yes >>> checking for sys/uio.h... yes >>> checking sys/param.h usability... yes >>> checking sys/param.h presence... yes >>> checking for sys/param.h... yes >>> checking sysexits.h usability... yes >>> checking sysexits.h presence... yes >>> checking for sysexits.h... yes >>> checking stdarg.h usability... yes >>> checking stdarg.h presence... yes >>> checking for stdarg.h... yes >>> checking varargs.h usability... no >>> checking varargs.h presence... no >>> checking for varargs.h... no >>> checking whether you have ss_family in struct sockaddr_storage... yes >>> checking whether you have sa_len in struct sockaddr... no >>> checking for socklen_t... yes >>> checking for gethostname... yes >>> checking for getdomainname... yes >>> checking for getpwnam... yes >>> checking for getspnam... yes >>> checking for gettimeofday... yes >>> checking for inet_aton... yes >>> checking for memcpy... yes >>> checking for mkdir... yes >>> checking for select... yes >>> checking for socket... yes >>> checking for strchr... yes >>> checking for strdup... yes >>> checking for strerror... yes >>> checking for strspn... yes >>> checking for strstr... yes >>> checking for strtol... yes >>> checking for jrand48... yes >>> updating cache ./config.cache >>> configure: creating ./config.status >>> config.status: creating Makefile >>> config.status: creating include/Makefile >>> config.status: creating sasldb/Makefile >>> config.status: creating plugins/Makefile >>> config.status: creating lib/Makefile >>> config.status: creating utils/Makefile >>> config.status: creating doc/Makefile >>> config.status: creating sample/Makefile >>> config.status: creating java/Makefile >>> config.status: creating java/CyrusSasl/Makefile >>> config.status: creating java/Test/Makefile >>> config.status: creating java/javax/Makefile >>> config.status: creating java/javax/security/Makefile >>> config.status: creating java/javax/security/auth/Makefile >>> config.status: creating java/javax/security/auth/callback/Makefile >>> config.status: creating pwcheck/Makefile >>> config.status: creating man/Makefile >>> config.status: creating config.h >>> config.status: executing depfiles commands >>> configure: configuring in saslauthd >>> configure: running /bin/sh './configure' --prefix=/usr/local >>> '--enable-gssapi=/usr/kerberos/include/' '--enable-static' >>> '--without-des' '--without-openssl' 'CFLAGS=-O2' >>> --cache-file=.././config.cache --srcdir=. >>> configure: loading cache .././config.cache >>> checking build system type... (cached) i686-pc-linux-gnu >>> checking host system type... (cached) i686-pc-linux-gnu >>> checking for a BSD-compatible install... (cached) /usr/bin/install -c >>> checking whether build environment is sane... yes >>> checking for gawk... (cached) gawk >>> checking whether make sets $(MAKE)... (cached) yes >>> checking for gcc... (cached) gcc >>> checking for C compiler default output... a.out >>> checking whether the C compiler works... yes >>> checking whether we are cross compiling... no >>> checking for suffix of executables... >>> checking for suffix of object files... (cached) o >>> checking whether we are using the GNU C compiler... (cached) yes >>> checking whether gcc accepts -g... (cached) yes >>> checking for gcc option to accept ANSI C... (cached) none needed >>> checking for style of include used by make... GNU >>> checking dependency style of gcc... (cached) gcc3 >>> checking how to run the C preprocessor... (cached) gcc -E >>> checking for gawk... (cached) gawk >>> checking whether make sets $(MAKE)... (cached) yes >>> checking whether ln -s works... yes >>> checking for a BSD-compatible install... /usr/bin/install -c >>> checking for __attribute__... (cached) yes >>> checking for runpath switch... -Wl,-rpath, >>> checking for connect... (cached) yes >>> checking for res_search... (cached) no >>> checking for res_search in -lresolv... (cached) yes >>> checking for dn_expand... (cached) yes >>> checking for dns_lookup... (cached) no >>> checking for egrep... (cached) grep -E >>> checking for ANSI C header files... (cached) yes >>> checking for sys/types.h... (cached) yes >>> checking for sys/stat.h... (cached) yes >>> checking for stdlib.h... (cached) yes >>> checking for string.h... (cached) yes >>> checking for memory.h... (cached) yes >>> checking for strings.h... (cached) yes >>> checking for inttypes.h... (cached) yes >>> checking for stdint.h... (cached) yes >>> checking for unistd.h... (cached) yes >>> checking for OpenSSL... no >>> checking KERBEROS_V4... disabled >>> checking for crypt... (cached) no >>> checking for crypt in -lcrypt... (cached) yes >>> checking for gssapi.h... (cached) no >>> checking for gssapi/gssapi.h... (cached) no >>> configure: WARNING: Disabling GSSAPI - no include files found >>> checking GSSAPI... disabled >>> checking for crypt... (cached) no >>> checking for crypt in -lcrypt... (cached) yes >>> checking for pam_start in -lpam... (cached) no >>> checking for PAM support... no >>> checking for inet_aton in -lresolv... (cached) yes >>> checking to include LDAP support... no >>> checking for ANSI C header files... (cached) yes >>> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes >>> checking whether time.h and sys/time.h may both be included... >>> (cached) yes >>> checking crypt.h usability... yes >>> checking crypt.h presence... yes >>> checking for crypt.h... yes >>> checking for fcntl.h... (cached) yes >>> checking krb5.h usability... no >>> checking krb5.h presence... no >>> checking for krb5.h... no >>> checking for strings.h... (cached) yes >>> checking for syslog.h... (cached) yes >>> checking for unistd.h... (cached) yes >>> checking for sys/time.h... (cached) yes >>> checking for sys/uio.h... (cached) yes >>> checking for an ANSI C-conforming const... (cached) yes >>> checking for pid_t... (cached) yes >>> checking whether gcc implements __func__... yes >>> checking return type of signal handlers... (cached) void >>> checking for gethostname... (cached) yes >>> checking for mkdir... (cached) yes >>> checking for socket... (cached) yes >>> checking for strdup... (cached) yes >>> checking for getspnam... (cached) yes >>> checking for strlcat... no >>> checking for strlcpy... no >>> checking for getaddrinfo... (cached) yes >>> checking for getnameinfo... (cached) yes >>> checking whether you have ss_family in struct sockaddr_storage... >>> (cached) yes >>> checking whether you have sa_len in struct sockaddr... (cached) no >>> checking for socklen_t... (cached) yes >>> updating cache .././config.cache >>> configure: creating ./config.status >>> config.status: creating Makefile >>> config.status: creating saslauthd.h >>> config.status: executing depfiles commands >>> Configuration Complete. Type 'make' to build. >>> [root at genie cyrus-sasl-2.1.20]# make >>> make all-recursive >>> make[1]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' >>> Making all in include >>> make[2]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' >>> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -W -O2 -MT makemd5.o >>> -MD -MP -MF ".deps/makemd5.Tpo" \ >>> -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \ >>> then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \ >>> else rm -f ".deps/makemd5.Tpo"; exit 1; \ >>> fi >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o makemd5 >>> makemd5.o -lresolv >>> mkdir .libs >>> gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv >>> rm -f md5global.h >>> ./makemd5 md5global.h >>> make[2]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' >>> Making all in sasldb >>> make[2]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb' >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../include -Wall -W -O2 -MT allockey.lo -MD >>> -MP -MF ".deps/allockey.Tpo" \ >>> -c -o allockey.lo `test -f 'allockey.c' || echo './'`allockey.c; \ >>> then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \ >>> else rm -f ".deps/allockey.Tpo"; exit 1; \ >>> fi >>> mkdir .libs >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W >>> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c >>> -fPIC -DPIC -o .libs/allockey.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W >>> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o >>> allockey.o >/dev/null 2>&1 >>> mv -f .libs/allockey.lo allockey.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../include -Wall -W -O2 -MT db_none.lo -MD >>> -MP -MF ".deps/db_none.Tpo" \ >>> -c -o db_none.lo `test -f 'db_none.c' || echo './'`db_none.c; \ >>> then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \ >>> else rm -f ".deps/db_none.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/db_none.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W >>> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -fPIC >>> -DPIC -o .libs/db_none.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W >>> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o >>> db_none.o >/dev/null 2>&1 >>> mv -f .libs/db_none.lo db_none.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o libsasldb.la >>> allockey.lo db_none.lo -lresolv >>> rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.* >>> ar cru .libs/libsasldb.al allockey.lo db_none.lo >>> ranlib .libs/libsasldb.al >>> creating libsasldb.la >>> (cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la libsasldb.la) >>> ar cru .libs/libsasldb.a db_none.o >>> make[2]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb' >>> Making all in plugins >>> make[2]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins' >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT cram.lo -MD -MP -MF ".deps/cram.Tpo" \ >>> -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \ >>> then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \ >>> else rm -f ".deps/cram.Tpo"; exit 1; \ >>> fi >>> mkdir .libs >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c >>> cram.c -fPIC -DPIC -o .libs/cram.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c >>> cram.c -o cram.o >/dev/null 2>&1 >>> mv -f .libs/cram.lo cram.lo >>> /bin/sh ./makeinit.sh >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \ >>> -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo >>> './'`crammd5_init.c; \ >>> then mv ".deps/crammd5_init.Tpo" ".deps/crammd5_init.Plo"; \ >>> else rm -f ".deps/crammd5_init.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/crammd5_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF >>> .deps/crammd5_init.Tpo -c crammd5_init.c -fPIC -DPIC -o >>> .libs/crammd5_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF >>> .deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o >>> >/dev/null 2>&1 >>> mv -f .libs/crammd5_init.lo crammd5_init.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \ >>> -c -o plugin_common.lo `test -f 'plugin_common.c' || echo >>> './'`plugin_common.c; \ >>> then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \ >>> else rm -f ".deps/plugin_common.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/plugin_common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF >>> .deps/plugin_common.Tpo -c plugin_common.c -fPIC -DPIC -o >>> .libs/plugin_common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF >>> .deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o >>> >/dev/null 2>&1 >>> mv -f .libs/plugin_common.lo plugin_common.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module >>> -export-dynamic -rpath /usr/lib/sasl2 -o libcrammd5.la >>> -version-info 2:20:0 cram.lo crammd5_init.lo plugin_common.lo -lresolv >>> rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.* >>> gcc -shared cram.lo crammd5_init.lo plugin_common.lo -lresolv -lc >>> -Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20 >>> (cd .libs && rm -f libcrammd5.so.2 && ln -s libcrammd5.so.2.0.20 >>> libcrammd5.so.2) >>> (cd .libs && rm -f libcrammd5.so && ln -s libcrammd5.so.2.0.20 >>> libcrammd5.so) >>> ar cru .libs/libcrammd5.a cram.o crammd5_init.o plugin_common.o >>> ranlib .libs/libcrammd5.a >>> creating libcrammd5.la >>> (cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la >>> libcrammd5.la) >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \ >>> -c -o digestmd5.lo `test -f 'digestmd5.c' || echo './'`digestmd5.c; \ >>> then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \ >>> else rm -f ".deps/digestmd5.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/digestmd5.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF >>> .deps/digestmd5.Tpo -c digestmd5.c -fPIC -DPIC -o .libs/digestmd5.lo >>> digestmd5.c: In function `digestmd5_server_mech_step2': >>> digestmd5.c:2093: warning: dereferencing type-punned pointer will >>> break strict-aliasing rules >>> digestmd5.c:2110: warning: dereferencing type-punned pointer will >>> break strict-aliasing rules >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF >>> .deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o >/dev/null 2>&1 >>> mv -f .libs/digestmd5.lo digestmd5.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \ >>> -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo >>> './'`digestmd5_init.c; \ >>> then mv ".deps/digestmd5_init.Tpo" ".deps/digestmd5_init.Plo"; \ >>> else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/digestmd5_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF >>> .deps/digestmd5_init.Tpo -c digestmd5_init.c -fPIC -DPIC -o >>> .libs/digestmd5_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF >>> .deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o >>> >/dev/null 2>&1 >>> mv -f .libs/digestmd5_init.lo digestmd5_init.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module >>> -export-dynamic -rpath /usr/lib/sasl2 -o libdigestmd5.la >>> -version-info 2:20:0 digestmd5.lo digestmd5_init.lo >>> plugin_common.lo -lresolv -lresolv >>> rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.* >>> gcc -shared digestmd5.lo digestmd5_init.lo plugin_common.lo >>> -lresolv -lresolv -lc -Wl,-soname -Wl,libdigestmd5.so.2 -o >>> .libs/libdigestmd5.so.2.0.20 >>> (cd .libs && rm -f libdigestmd5.so.2 && ln -s libdigestmd5.so.2.0.20 >>> libdigestmd5.so.2) >>> (cd .libs && rm -f libdigestmd5.so && ln -s libdigestmd5.so.2.0.20 >>> libdigestmd5.so) >>> ar cru .libs/libdigestmd5.a digestmd5.o digestmd5_init.o >>> plugin_common.o >>> ranlib .libs/libdigestmd5.a >>> creating libdigestmd5.la >>> (cd .libs && rm -f libdigestmd5.la && ln -s ../libdigestmd5.la >>> libdigestmd5.la) >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT plain.lo -MD -MP -MF ".deps/plain.Tpo" \ >>> -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \ >>> then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \ >>> else rm -f ".deps/plain.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/plain.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo >>> -c plain.c -fPIC -DPIC -o .libs/plain.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo >>> -c plain.c -o plain.o >/dev/null 2>&1 >>> mv -f .libs/plain.lo plain.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \ >>> -c -o plain_init.lo `test -f 'plain_init.c' || echo >>> './'`plain_init.c; \ >>> then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \ >>> else rm -f ".deps/plain_init.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/plain_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF >>> .deps/plain_init.Tpo -c plain_init.c -fPIC -DPIC -o >>> .libs/plain_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF >>> .deps/plain_init.Tpo -c plain_init.c -o plain_init.o >/dev/null 2>&1 >>> mv -f .libs/plain_init.lo plain_init.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module >>> -export-dynamic -rpath /usr/lib/sasl2 -o libplain.la -version-info >>> 2:20:0 plain.lo plain_init.lo plugin_common.lo -lcrypt -lresolv >>> rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.* >>> gcc -shared plain.lo plain_init.lo plugin_common.lo -lcrypt >>> -lresolv -lc -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20 >>> (cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20 >>> libplain.so.2) >>> (cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20 libplain.so) >>> ar cru .libs/libplain.a plain.o plain_init.o plugin_common.o >>> ranlib .libs/libplain.a >>> creating libplain.la >>> (cd .libs && rm -f libplain.la && ln -s ../libplain.la libplain.la) >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \ >>> -c -o anonymous.lo `test -f 'anonymous.c' || echo './'`anonymous.c; \ >>> then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \ >>> else rm -f ".deps/anonymous.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/anonymous.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF >>> .deps/anonymous.Tpo -c anonymous.c -fPIC -DPIC -o .libs/anonymous.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF >>> .deps/anonymous.Tpo -c anonymous.c -o anonymous.o >/dev/null 2>&1 >>> mv -f .libs/anonymous.lo anonymous.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2 >>> -MT anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \ >>> -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo >>> './'`anonymous_init.c; \ >>> then mv ".deps/anonymous_init.Tpo" ".deps/anonymous_init.Plo"; \ >>> else rm -f ".deps/anonymous_init.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/anonymous_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF >>> .deps/anonymous_init.Tpo -c anonymous_init.c -fPIC -DPIC -o >>> .libs/anonymous_init.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb >>> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF >>> .deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o >>> >/dev/null 2>&1 >>> mv -f .libs/anonymous_init.lo anonymous_init.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module >>> -export-dynamic -rpath /usr/lib/sasl2 -o libanonymous.la >>> -version-info 2:20:0 anonymous.lo anonymous_init.lo >>> plugin_common.lo -lresolv >>> rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.* >>> gcc -shared anonymous.lo anonymous_init.lo plugin_common.lo >>> -lresolv -lc -Wl,-soname -Wl,libanonymous.so.2 -o >>> .libs/libanonymous.so.2.0.20 >>> (cd .libs && rm -f libanonymous.so.2 && ln -s libanonymous.so.2.0.20 >>> libanonymous.so.2) >>> (cd .libs && rm -f libanonymous.so && ln -s libanonymous.so.2.0.20 >>> libanonymous.so) >>> ar cru .libs/libanonymous.a anonymous.o anonymous_init.o >>> plugin_common.o >>> ranlib .libs/libanonymous.a >>> creating libanonymous.la >>> (cd .libs && rm -f libanonymous.la && ln -s ../libanonymous.la >>> libanonymous.la) >>> make[2]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins' >>> Making all in lib >>> make[2]: Entering directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib' >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> auxprop.lo -MD -MP -MF ".deps/auxprop.Tpo" \ >>> -c -o auxprop.lo `test -f 'auxprop.c' || echo './'`auxprop.c; \ >>> then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \ >>> else rm -f ".deps/auxprop.Tpo"; exit 1; \ >>> fi >>> mkdir .libs >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF >>> .deps/auxprop.Tpo -c auxprop.c -fPIC -DPIC -o .libs/auxprop.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF >>> .deps/auxprop.Tpo -c auxprop.c -o auxprop.o >/dev/null 2>&1 >>> mv -f .libs/auxprop.lo auxprop.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> canonusr.lo -MD -MP -MF ".deps/canonusr.Tpo" \ >>> -c -o canonusr.lo `test -f 'canonusr.c' || echo './'`canonusr.c; \ >>> then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \ >>> else rm -f ".deps/canonusr.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/canonusr.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF >>> .deps/canonusr.Tpo -c canonusr.c -fPIC -DPIC -o .libs/canonusr.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF >>> .deps/canonusr.Tpo -c canonusr.c -o canonusr.o >/dev/null 2>&1 >>> mv -f .libs/canonusr.lo canonusr.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> checkpw.lo -MD -MP -MF ".deps/checkpw.Tpo" \ >>> -c -o checkpw.lo `test -f 'checkpw.c' || echo './'`checkpw.c; \ >>> then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \ >>> else rm -f ".deps/checkpw.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/checkpw.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF >>> .deps/checkpw.Tpo -c checkpw.c -fPIC -DPIC -o .libs/checkpw.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF >>> .deps/checkpw.Tpo -c checkpw.c -o checkpw.o >/dev/null 2>&1 >>> mv -f .libs/checkpw.lo checkpw.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> client.lo -MD -MP -MF ".deps/client.Tpo" \ >>> -c -o client.lo `test -f 'client.c' || echo './'`client.c; \ >>> then mv ".deps/client.Tpo" ".deps/client.Plo"; \ >>> else rm -f ".deps/client.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/client.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo >>> -c client.c -fPIC -DPIC -o .libs/client.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo >>> -c client.c -o client.o >/dev/null 2>&1 >>> mv -f .libs/client.lo client.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> common.lo -MD -MP -MF ".deps/common.Tpo" \ >>> -c -o common.lo `test -f 'common.c' || echo './'`common.c; \ >>> then mv ".deps/common.Tpo" ".deps/common.Plo"; \ >>> else rm -f ".deps/common.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo >>> -c common.c -fPIC -DPIC -o .libs/common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo >>> -c common.c -o common.o >/dev/null 2>&1 >>> mv -f .libs/common.lo common.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> config.lo -MD -MP -MF ".deps/config.Tpo" \ >>> -c -o config.lo `test -f 'config.c' || echo './'`config.c; \ >>> then mv ".deps/config.Tpo" ".deps/config.Plo"; \ >>> else rm -f ".deps/config.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/config.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo >>> -c config.c -fPIC -DPIC -o .libs/config.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo >>> -c config.c -o config.o >/dev/null 2>&1 >>> mv -f .libs/config.lo config.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> external.lo -MD -MP -MF ".deps/external.Tpo" \ >>> -c -o external.lo `test -f 'external.c' || echo './'`external.c; \ >>> then mv ".deps/external.Tpo" ".deps/external.Plo"; \ >>> else rm -f ".deps/external.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/external.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF >>> .deps/external.Tpo -c external.c -fPIC -DPIC -o .libs/external.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF >>> .deps/external.Tpo -c external.c -o external.o >/dev/null 2>&1 >>> mv -f .libs/external.lo external.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> md5.lo -MD -MP -MF ".deps/md5.Tpo" \ >>> -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \ >>> then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \ >>> else rm -f ".deps/md5.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/md5.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c >>> md5.c -fPIC -DPIC -o .libs/md5.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c >>> md5.c -o md5.o >/dev/null 2>&1 >>> mv -f .libs/md5.lo md5.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> saslutil.lo -MD -MP -MF ".deps/saslutil.Tpo" \ >>> -c -o saslutil.lo `test -f 'saslutil.c' || echo './'`saslutil.c; \ >>> then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \ >>> else rm -f ".deps/saslutil.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/saslutil.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF >>> .deps/saslutil.Tpo -c saslutil.c -fPIC -DPIC -o .libs/saslutil.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF >>> .deps/saslutil.Tpo -c saslutil.c -o saslutil.o >/dev/null 2>&1 >>> mv -f .libs/saslutil.lo saslutil.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> server.lo -MD -MP -MF ".deps/server.Tpo" \ >>> -c -o server.lo `test -f 'server.c' || echo './'`server.c; \ >>> then mv ".deps/server.Tpo" ".deps/server.Plo"; \ >>> else rm -f ".deps/server.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/server.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo >>> -c server.c -fPIC -DPIC -o .libs/server.lo >>> server.c: In function `sasl_setpass': >>> server.c:151: warning: dereferencing type-punned pointer will break >>> strict-aliasing rules >>> server.c: In function `sasl_server_start': >>> server.c:1245: warning: dereferencing type-punned pointer will break >>> strict-aliasing rules >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo >>> -c server.c -o server.o >/dev/null 2>&1 >>> mv -f .libs/server.lo server.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> seterror.lo -MD -MP -MF ".deps/seterror.Tpo" \ >>> -c -o seterror.lo `test -f 'seterror.c' || echo './'`seterror.c; \ >>> then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \ >>> else rm -f ".deps/seterror.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/seterror.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF >>> .deps/seterror.Tpo -c seterror.c -fPIC -DPIC -o .libs/seterror.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF >>> .deps/seterror.Tpo -c seterror.c -o seterror.o >/dev/null 2>&1 >>> mv -f .libs/seterror.lo seterror.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> dlopen.lo -MD -MP -MF ".deps/dlopen.Tpo" \ >>> -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c; \ >>> then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \ >>> else rm -f ".deps/dlopen.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/dlopen.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo >>> -c dlopen.c -fPIC -DPIC -o .libs/dlopen.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo >>> -c dlopen.c -o dlopen.o >/dev/null 2>&1 >>> mv -f .libs/dlopen.lo dlopen.lo >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. >>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT >>> plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \ >>> -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' || >>> echo './'`../plugins/plugin_common.c; \ >>> then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \ >>> else rm -f ".deps/plugin_common.Tpo"; exit 1; \ >>> fi >>> rm -f .libs/plugin_common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF >>> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -fPIC -DPIC >>> -o .libs/plugin_common.lo >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF >>> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -o >>> plugin_common.o >/dev/null 2>&1 >>> mv -f .libs/plugin_common.lo plugin_common.lo >>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o libsasl2.la >>> -rpath /usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo >>> checkpw.lo client.lo common.lo config.lo external.lo md5.lo >>> saslutil.lo server.lo seterror.lo dlopen.lo plugin_common.lo -ldl >>> -lresolv -lresolv >>> rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.* >>> gcc -shared auxprop.lo canonusr.lo checkpw.lo client.lo common.lo >>> config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo >>> dlopen.lo plugin_common.lo -ldl -lresolv -lresolv -lc -Wl,-soname >>> -Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20 >>> (cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20 >>> libsasl2.so.2) >>> (cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20 libsasl2.so) >>> ar cru .libs/libsasl2.a auxprop.o canonusr.o checkpw.o client.o >>> common.o config.o external.o md5.o saslutil.o server.o seterror.o >>> dlopen.o plugin_common.o >>> ranlib .libs/libsasl2.a >>> creating libsasl2.la >>> (cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la libsasl2.la) >>> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins >>> -I../include -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF >>> ".deps/../plugins/sasldb.Tpo" \ >>> -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo >>> './'`../plugins/sasldb.c; \ >>> then mv ".deps/../plugins/sasldb.Tpo" ".deps/../plugins/sasldb.Po"; \ >>> else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \ >>> fi >>> ../plugins/sasldb.c:129: fatal error: opening dependency file >>> .deps/../plugins/sasldb.Tpo: No such file or directory >>> compilation terminated. >>> make[2]: *** [../plugins/sasldb.o] Error 1 >>> make[2]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib' >>> make[1]: *** [all-recursive] Error 1 >>> make[1]: Leaving directory >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' >>> make: *** [all] Error 2 >>> [root at genie cyrus-sasl-2.1.20]# >>> >>> -- >>> Fedora-directory-users mailing list >>> Fedora-directory-users at redhat.com >>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >> >> >> >> ------------------------------------------------------------------------ >> >> -- >> Fedora-directory-users mailing list >> Fedora-directory-users at redhat.com >> https://www.redhat.com/mailman/listinfo/fedora-directory-users >> >> > >------------------------------------------------------------------------ > >-- >Fedora-directory-users mailing list >Fedora-directory-users at redhat.com >https://www.redhat.com/mailman/listinfo/fedora-directory-users > >
