Your configure options are wrong, I'm surprised it didn't complain about it. You don't have a space between the directory in --enable-gssapi and --enable-static. Do a: gmake distclean in the cyrus-sasl directory and re-do the configure and make again. rob Richard Megginson wrote: > There is still no libsasl2.a. I'm not sure what the problem is. Try > using "make" instead of "gmake" - perhaps gmake is slightly different on > your OS/version? > > Jason Kullo Sam wrote: > >> Ok...guess I have to get this build going after all. Getting halfway >> through the make, then failing with the following error. Doh! >> >> Attacked the cyrus install again. Did a make clean, then changed my >> mind and deleted entire folder and started all over with it. For some >> reason, the sasl make seemed to go this time(maybe I just needed to >> blow the folder out last time)...but, the make on ldapserver still >> failed. See below for log(snipped out bits of spam...) On the bright >> side...I'm actually learning lots! =D >> ==================================================================== >> [root at genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf - >> tar: Read 2048 bytes from - >> [root at genie ds]# cd cyrus-sasl-2.1.20 >> [root at genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure >> --enable-gssapi=/usr/kerberos/include/--enable-static --without-des >> --without-openssl >> configure: creating cache ./config.cache >> checking build system type... i686-pc-linux-gnu >> checking host system type... i686-pc-linux-gnu >> checking target system type... i686-pc-linux-gnu >> -------------------- SNIP Successful Config >> updating cache .././config.cache >> configure: creating ./config.status >> config.status: creating Makefile >> config.status: creating saslauthd.h >> config.status: executing depfiles commands >> Configuration Complete. Type 'make' to build. >> [root at genie cyrus-sasl-2.1.20]# >> ########################## >> Onto the make... >> ########################## >> >> Configuration Complete. Type 'make' to build. >> [root at genie cyrus-sasl-2.1.20]# gmake >> gmake all-recursive >> gmake[1]: Entering directory >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' >> Making all in include >> gmake[2]: Entering directory >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include' >> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -W -O2 -MT makemd5.o -MD >> -MP -MF ".deps/makemd5.Tpo" \ >> -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \ >> then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \ >> else rm -f ".deps/makemd5.Tpo"; exit 1; \ >> fi >> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o makemd5 >> makemd5.o -lresolv >> mkdir .libs >> >> ------------------- SNIP Make spam ---------------------------- >> >> if gcc -DHAVE_CONFIG_H >> -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. >> -I. -I.. -I. -I. -I. -I./include -I./include -I./../include -O2 -MT >> saslauthd-main.o -MD -MP -MF ".deps/saslauthd-main.Tpo" \ >> -c -o saslauthd-main.o `test -f 'saslauthd-main.c' || echo >> './'`saslauthd-main.c; \ >> then mv ".deps/saslauthd-main.Tpo" ".deps/saslauthd-main.Po"; \ >> else rm -f ".deps/saslauthd-main.Tpo"; exit 1; \ >> fi >> if gcc -DHAVE_CONFIG_H >> -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. >> -I. -I.. -I. -I. -I. -I./include -I./include -I./../include -O2 -MT >> md5.o -MD -MP -MF ".deps/md5.Tpo" \ >> -c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \ >> then mv ".deps/md5.Tpo" ".deps/md5.Po"; \ >> else rm -f ".deps/md5.Tpo"; exit 1; \ >> fi >> gcc -O2 -o saslauthd mechanisms.o auth_dce.o auth_getpwent.o >> auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o >> auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o >> ipc_doors.o saslauthd-main.o md5.o -lcrypt -lresolv -lresolv >> gmake[3]: Leaving directory >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd' >> gmake[2]: Leaving directory >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd' >> gmake[2]: Entering directory >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' >> gmake[2]: Leaving directory >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' >> gmake[1]: Leaving directory >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20' >> [root at genie cyrus-sasl-2.1.20]# >> ####################################### >> Seems to have compiled right that time for some reason...weird... >> ####################################### >> >> [root at genie cyrus-sasl-2.1.20]# cd .. >> [root at genie ds]# ls >> 09.23 icu-2.4.tgz >> 09.27 ldapserver >> cyrus-sasl-2.1.20 mozilla >> cyrus-sasl-2.1.20.tar.gz mozilla-components.tar.gz >> db-4.2.52.NC net-snmp-5.2.1 >> db-4.2.52.NC.tar.gz net-snmp-5.2.1.tar.gz >> fedora-adminutil-devel-7.1 patch.4.2.52.1 >> fedora-adminutil-devel-7.1.tar.gz patch.4.2.52.2 >> fedora-setuputil-devel-7.1 patch.4.2.52.3 >> fedora-setuputil-devel-7.1.tar.gz patch.4.2.52.4 >> icu >> [root at genie ds]# cd ldapserver/ >> [root at genie ldapserver]# gmake USE_PERL_FROM_PATH=1 >> BUILD_DEBUG=optimize if test ! -d Linux; then mkdir Linux; fi; >> /usr/bin/perl buildnum.pl -p Linux >> NSOS_RELEASE is: 2.6 >> /usr/bin/perl pumpkin.pl 120 pumpkin.dat >> The components are up to date >> >> >> ==== Starting LDAP Server ========== >> >> gmake BUILD_OPT=1 NO_JAVA=1 nsCommon >> gmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/ldapserver' >> >> -------------------------- SNIP Make Spam >> >> .o >> ../../../built/Linux-domestic-optimize-normal-slapd/servers/obj/main.o >> -L../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server >> -lslapd -lldapu >> -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lssl3 >> -lnss3 -lsoftokn3 -L../../../../mozilla/dist/lib -lssldap50 -lldap50 >> -lprldap50 >> -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lplc4 >> -lplds4 -lnspr4 >> -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -ldbm >> -lavl -lldif -llitekey -ldl >> -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib >> -lsvrcore -L../../../../cyrus-sasl-2.1.20/lib -lsasl2 >> -L/usr/kerberos/lib -lgssapi_krb5 -lcrypt -lpthread >> -L../../../../db-4.2.52.NC/built/.libs -ldb-4.2 >> /usr/bin/ld: cannot find -lsasl2 >> collect2: ld returned 1 exit status >> gmake[3]: *** >> [../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server/ns-slapd] >> Error 1 >> gmake[3]: Leaving directory >> `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers/slapd' >> gmake[2]: *** [_slapd] Error 2 >> gmake[2]: Leaving directory >> `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers' >> gmake[1]: *** [ldapprogs] Error 2 >> gmake[1]: Leaving directory >> `/root/Desktop/dsbuild-static/ds/ldapserver/ldap' >> gmake: *** [buildDirectory] Error 2 >> [root at genie ldapserver]# ls ../cyrus-sasl-2.1.20/lib >> auxprop.c client.lo dlopen.o Makefile.in saslutil.o >> auxprop.lo client.o external.c md5.c server.c >> auxprop.o common.c external.lo md5.lo server.lo >> canonusr.c common.lo external.o md5.o server.o >> canonusr.lo common.o getaddrinfo.c NTMakefile seterror.c >> canonusr.o config.c getnameinfo.c plugin_common.lo seterror.lo >> checkpw.c config.lo getsubopt.c plugin_common.o seterror.o >> checkpw.lo config.o libsasl2.la saslint.h snprintf.c >> checkpw.o dlopen.c Makefile saslutil.c staticopen.h >> client.c dlopen.lo Makefile.am saslutil.lo windlopen.c >> [root at genie ldapserver]# -- >> Fedora-directory-users mailing list >> Fedora-directory-users at redhat.com >> https://www.redhat.com/mailman/listinfo/fedora-directory-users > > > > ------------------------------------------------------------------------ > > -- > Fedora-directory-users mailing list > Fedora-directory-users at redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3178 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.fedoraproject.org/pipermail/389-users/attachments/20050929/5d8e1719/attachment.bin
